20 Most Recent Kenwood KR-V990D Receiver - Page 4 Questions & Answers

These dual plastic type cassette deck hardly warrant a service call due to their price and build but to correct this problem the unit needs to be seen by a Technician. The unit can have a lot of different things wrong with it from broken solder joints to defective or abuse tact switches. If you are asking this question, it means that you are not qualified to work on it yourself. Thus the need for a Service Technician.I am in Chicago area and I work on decks all the time- if you supply a location I can tell you of other shops I know of.

Then fix a protection on it

Kenwood.com

Connect using speaker wires or rca shielded cable depending on the TV connections.

Grasp the lift bar that the tonearm is raised by, and pull it gently up, and push it back down 2 or 3 times. That re-distributes the silicone fluid, and usually brings the nice, slow drop back. No dice?

check and test the circuit for damage short or overheating

you could open up the top cover and release door manually.

yes you will need speakers connected to the receiver - you will need a pair of 8 Ohm speakers able to handle 70 Watts per channel https://www.hifiengine.com/manual_library/kenwood/kr-v75r.shtml

Hi James Kohler, to connect the EQ SH-8029 to the Kenwood KR-710, you must have two cables from 2 RCA to 2 RCA One connects it to the EQ Line In (Line In) and on the other hand you connect it to the REC output of Tape1 in the Kenwood, the other cable goes from the Line Out of the EQ to the entrance Tape1 PLAY at Kenwood In order to hear the equalized sound, you must select the Source, example; Radio CD, Phono and you must enable Tape 1 If you had used Tape 1 connections, you can use Tape 2 and if you have used both of Tape, you can do what you indicated first and what was in Tape 1 connect it to the Tape entrance, which brings the EQ I hope you can connect it Greetings Franco Dosil Hola James Kohler, para conectar el EQ SH-8029 al Kenwood KR-710, deberas contar con dos cables de 2 RCA a 2 RCA Uno lo coenctas en la Entrada de Linea del EQ(Line In) y por el otro lado lo conectas a la salida de REC de Tape1 en el Kenwood, el otro cable va desde la salida de Linea (Line Out) del EQ hasta la entrada PLAY de Tape1 en el Kenwood Para poder escuchar el sonido ecualizado, deberas seleccionar la Fuente, ejemplo ; Radio CD, Phono y debes habilitar Tape 1 Si tubieras utilizadas las conexiones de Tape 1, puedes usar Tape 2 y si tienes utilizadas las dos de Tape, puedes hacer lo que te indique primero y lo que estaba en Tape 1 lo conectas en la entrada de Tape, que trae el EQ Espero lo puedas conectar Saludos Franco Dosil https://www.manualslib.com/manual/287007/Kenwood-Kr-710.html

RC-533 remote control, available at eBay, you can also google for other options

RC-R0620 is the remote control model number (RC-R0622 in U.K./EU) you can buy on eBay or amazon A universal remote may work but only if the universal has codes for your Kenwood. Check first.

Encompass claims to have the remote control for the RXD-A53 here: https://encompass.com/model/KENRXDA53 . The direct link is https://encompass.com/item/3994551/Kenwood/A70-1337-05/ . The RC-553 remote isn't in stock but should ship in 10 days. Other sites that sell replacement remotes list the RC-553 for sale. One source is https://replacementremotecontrols.com/kenwood-rc-553-audio-stereo-system-remote-control/ . There is also an Ebay listing for the remote control. I hope this helps. Cindy Wells

Hello Anonymous, you can connect your GE-1000 on the KA-1000, for that you will have to use two double RCA RCA chip cables, the first game is connected from LINE IN on the GE-1000 to REC OUT A in the KA-1000 and the other LINE OUT game of the GE-1000 to PLAY IN A, of the KA-1000 In order to listen to equalized, you must play through the Phono, Radio or Auxiliary input and select Tape A Try and comment Regards Franco Dosil Hola Anonimo, puedes conectar tu GE-1000 en el KA-1000, para eso tendras que usar dos cables dobles de fichas RCA RCA, el primer juego va conectado de LINE IN en el GE-1000 a REC OUT A en el KA-1000 y el otro juego de LINE OUT del GE-1000 a PLAY IN A, del KA-1000 Para poder escuchar ecualizado, deberas reproducir por la entrada Phono , Radio o Auxiliar y seleccionar Tape A Prueba y comenta Saludos Franco Dosil https://www.manualscenter.com/manuals/kenwood/ge1000-owner-manual.html https://www.vintageshifi.com/repertoire-pdf/Kenwood-4.php

Hi James, for what you say, you could have problems with the speaker outputs or power supply Try disconnecting all speakers from the back panel of your Kenwood and testing if it does the same If you do, it is safe source and output failure If you don't, check all the cables and connections in the speakers well and go connecting to one speaker at a time. Comment the results Regards Franco Dosil Hola James, por lo que comentas, podrias tener problemas en las salidas de parlantes o fuente de alimentacion Prueba desconectar todos los parlantes del panel posterior de tu Kenwood y prueba si hace lo mismo Si lo hace, es seguro falla de fuente y salidas Si no lo hace, revisa bien todos los cables y conexiones en los bafles y ve re conectando de a un bafle por vez Comenta los resultados Saludos Franco Dosil https://www.vintageshifi.com/repertoire-pdf/pdf/telecharge.php?pdf=Kenwood-KRV-7070-Service-Manual.pdf

Hello Anonymous, the fault may be in the power supply and polarization circuit of the display The display is powered by an alternating current (AC) voltage of 3 to 4 volts and a negative direct current (DC) polarization voltage of - 22 to -27 volts there are usually associated capacitors that lose value and can cause this type of failure If you have technical knowledge, I send you the link so you can download the service manual If not consult a specialized technical service I hope you can solve the problem Regards Franco Dosil Hola Anonimo, la falla puede estar en el circuito de alimentaci?n y polarizaci?n del display El display se alimenta con una tensi?n de corriente alterna(CA) de 3 a 4 volts y una tensi?n negativa corriente continua (DC) de polarizaci?n de - 22 a -27 volts por lo general hay capacitores asociados que pierden el valor y pueden producir este tipo de fallas Si tienes conocimientos t?cnicos, te env?o el link para que puedas descargar el manual de servicio Sino consulta a un servicio t?cnico especializado Espero puedas resolver el problema Saludos Franco Dosil https://www.vintageshifi.com/repertoire-pdf/pdf/telecharge.php?pdf=Kenwood-KXW-8030-Service-Manual.pdf

It will be between your outputs for the speakers before going into your television . Follow wiring instructions.

Tape (audio) in, is input.
Tape (audio) out, is output to record what the receiver is playing.
This won't work, to connect an equalizer.
Receivers have a zero out and in and are jumpered until adding what you want to add, that's where equalizer or amp, pre-amp goes

how to videos

Press the power on on the remote.

Open an account here for access to the service manual Kenwood 54 Manual Stereo Integrated Amplifier HiFi Engine