RC-R0620 is the remote control model number (RC-R0622 in U.K./EU) you can buy on eBay or amazon A universal remote may work but only if the universal has codes for your Kenwood. Check first.
Hello Anonymous, you can connect your GE-1000 on the KA-1000, for that you will have to use two double RCA RCA chip cables, the first game is connected from LINE IN on the GE-1000 to REC OUT A
in the KA-1000 and the other LINE OUT game of the GE-1000 to PLAY IN A, of the KA-1000
In order to listen to equalized, you must play through the Phono, Radio or Auxiliary input and select Tape A
Try and comment
Regards Franco Dosil
Hola Anonimo, puedes conectar tu GE-1000 en el KA-1000, para eso tendras que usar dos cables dobles de fichas RCA RCA, el primer juego va conectado de LINE IN en el GE-1000 a REC OUT A
en el KA-1000 y el otro juego de LINE OUT del GE-1000 a PLAY IN A, del KA-1000
Para poder escuchar ecualizado, deberas reproducir por la entrada Phono , Radio o Auxiliar y seleccionar Tape A
Prueba y comenta
Saludos Franco Dosil
https://www.manualscenter.com/manuals/kenwood/ge1000-owner-manual.htmlhttps://www.vintageshifi.com/repertoire-pdf/Kenwood-4.php
Hi James, for what you say, you could have problems with the speaker outputs or power supply
Try disconnecting all speakers from the back panel of your Kenwood and testing if it does the same
If you do, it is safe source and output failure
If you don't, check all the cables and connections in the speakers well and go connecting to one speaker at a time.
Comment the results
Regards Franco Dosil
Hola James, por lo que comentas, podrias tener problemas en las salidas de parlantes o fuente de alimentacion
Prueba desconectar todos los parlantes del panel posterior de tu Kenwood y prueba si hace lo mismo
Si lo hace, es seguro falla de fuente y salidas
Si no lo hace, revisa bien todos los cables y conexiones en los bafles y ve re conectando de a un bafle por vez
Comenta los resultados
Saludos Franco Dosil
https://www.vintageshifi.com/repertoire-pdf/pdf/telecharge.php?pdf=Kenwood-KRV-7070-Service-Manual.pdf
Hello Anonymous, the fault may be in the power supply and polarization circuit of the display
The display is powered by an alternating current (AC) voltage of 3 to 4 volts and a negative direct current (DC) polarization voltage of - 22 to -27 volts
there are usually associated capacitors that lose value and can cause this type of failure
If you have technical knowledge, I send you the link so you can download the service manual
If not consult a specialized technical service
I hope you can solve the problem
Regards Franco Dosil
Hola Anonimo, la falla puede estar en el circuito de alimentaci?n y polarizaci?n del display
El display se alimenta con una tensi?n de corriente alterna(CA) de 3 a 4 volts y una tensi?n negativa corriente continua (DC) de polarizaci?n de - 22 a -27 volts
por lo general hay capacitores asociados que pierden el valor y pueden producir este tipo de fallas
Si tienes conocimientos t?cnicos, te env?o el link para que puedas descargar el manual de servicio
Sino consulta a un servicio t?cnico especializado
Espero puedas resolver el problema
Saludos Franco Dosil
https://www.vintageshifi.com/repertoire-pdf/pdf/telecharge.php?pdf=Kenwood-KXW-8030-Service-Manual.pdf
Tape (audio) in, is input. Tape (audio) out, is output to record what the receiver is playing. This won't work, to connect an equalizer. Receivers have a zero out and in and are jumpered until adding what you want to add, that's where equalizer or amp, pre-amp goes
Hello Educare Shalom, to be able to handle the volume of your kenwood tuner kt 45, you should connect a stereo potentiometer of 50 kOhms Linear in the output signal or connect it to a sound mixer, to be able to regulate the output level
Hola Educare Shalom, para poder manejar el volumen de tu kenwood tuner kt 45, deber?as conectar un potenciometro est?reo de 50 kOhms Lineal en la se?al de salida o conectarlo a un mezclador de sonido, para poder regular el nivel de salida
Hello Kamran, I sent you the link to download the manuals of your Kenwood RXD-V323, so you can check the numbers of the belts you need
I hope it helps you
Greetings Franco Dosil
Hola Kamran, Te envio el link para que descargues los manuales de tu Kenwood RXD-V323, para que consultes los numeros de parte de las correas que necesitas
Espero te sirva
Saludos Franco Dosil
https://www.manualslib.com/manual/950090/Kenwood-Rxd-V323.html#product-RXD-V323Download manual
Hi David, if your Kenwood does not turn on, check the power input fuse, to locate it, you should remove the lid
If the fuse is burned, replace it with only one of equal value, to avoid serious damage, if you change it and it starts to burn, look for a specialized technical service
I hope you can solve the problem
Greetings Franco Dosil
Hola David, si tu Kenwood no enciende, revisa el fusible de entrada de energia, para ubicarlo, deberas retirar la tapa
Si el fusible esta quemado, reemplazalo solamente por uno de igual valor, para evitar graves da?os, si lo cambias y se vueve a quemar, busca un servicio tecnico especializado
Espero puedas resolver el problema
Saludos Franco Dosil
Hello JoncoteO, if one of your Surround speakers does not work, you can not use the Front B speakers connection as a replacement
You should check if the output of your Kenwood is wrong or the speaker is wrong
Try connecting the Surround speaker that does not work, in the Surround output of the Kenwood that works, if you listen to it, well the problem is in the equipment
If you do not hear it, the speaker has the problem
I suggest you repair it, since you could have more damage
I hope you can solve the problem
Greetings Franco Dosil
Hola JoncoteO, si uno de tus parlantes Surround, no funciona, no puedes usar la conexi?n de parlantes Frontales B, como reemplazo
Debes comprobar si la salida de tu Kenwood esta mal o el parlante esta mal
Prueba conectar el parlante Surround que no funciona, en la salida Surround del Kenwood que funciona, si lo escuchas, bien el problema esta en el equipo
Si no lo escuchas, el parlante tiene el problema
Te sugiero que lo repares, ya que podr?as tener mayor cantidad de da?os
Espero puedas solucionar el problema
Saludos Franco Dosil
https://data2.manualslib.com/pdf2/29/2871/287046-kenwood/krfv5010.pdf?17d98b099c8a488d5135daf8097a974c&take=binary
Hi Michael, if your Kenwood CD 204 can play in random mode among the 5 CDs, you have the Randon button, for that function
On page 17, he explains the Randon function
I sent you the link of the user manual so you can download it
I hope you can solve your need
Greetings Franco Dosil
Hola Michael, si tu Kenwood CD 204 puede reproducir en modo aleatorio entre los 5 CD, tienes el bot?n de Randon, para esa funci?n
En la pagina 17, te explica la funci?n Randon
Te env?o el link del manual de usuario para que lo descargues
espero que puedas resolver tu necesidad
Saludos Franco Dosil
https://data2.manualslib.com/pdf/9/862/86192-kenwood/dpfr3010.pdf?e84121e9d1645b7418a0352ba4d72dd1&take=binary