Hi James Kohler, to connect the EQ SH-8029 to the Kenwood KR-710, you must have two cables from 2 RCA to 2 RCA
One connects it to the EQ Line In (Line In) and on the other hand you connect it to the REC output of Tape1 in the Kenwood, the other cable goes from the Line Out of the EQ to the entrance Tape1 PLAY at Kenwood
In order to hear the equalized sound, you must select the Source, example; Radio CD, Phono and you must enable Tape 1
If you had used Tape 1 connections, you can use Tape 2 and if you have used both of Tape, you can do what you indicated first and what was in Tape 1 connect it to the Tape entrance, which brings the EQ
I hope you can connect it
Greetings Franco Dosil
Hola James Kohler, para conectar el EQ SH-8029 al Kenwood KR-710, deberas contar con dos cables de 2 RCA a 2 RCA
Uno lo coenctas en la Entrada de Linea del EQ(Line In) y por el otro lado lo conectas a la salida de REC de Tape1 en el Kenwood, el otro cable va desde la salida de Linea (Line Out) del EQ hasta la entrada PLAY de Tape1 en el Kenwood
Para poder escuchar el sonido ecualizado, deberas seleccionar la Fuente, ejemplo ; Radio CD, Phono y debes habilitar Tape 1
Si tubieras utilizadas las conexiones de Tape 1, puedes usar Tape 2 y si tienes utilizadas las dos de Tape, puedes hacer lo que te indique primero y lo que estaba en Tape 1 lo conectas en la entrada de Tape, que trae el EQ
Espero lo puedas conectar
Saludos Franco Dosil
https://www.manualslib.com/manual/287007/Kenwood-Kr-710.html