Top 20 Kenwood CT 401 Hi-Fi Stereo Dual Cassette Deck Single Dual Cassette Deck Questions & Answers

Look on ebay, for starters...worked for me...NK

Kenwood CT 401... • 140 views • 0 helpful votes

Yes, the belts need to be check and idlers or whatever drive mechanism that is used in that system. Dual deck units are among the most unreliable units there are and a reason I tell people for the last 30 years not to buy those things. Almost most of the time they are not worth fixing due to their poor performance at the end. These are facts not just opinion.

Kenwood CT 401... • 675 views • 0 helpful votes

I would have thought that it should go from the amp to the tuner,then the tape deck and finally the CD deck.

I'm suspecting that your tuner is faulty and thats whats causing the system to shut down

Kenwood CT 401... • 110 views • 0 helpful votes

Needs two new 8" drive belts. They install in 5 mins and cost just a few bucks. [email protected] if you need more help.

Kenwood CT 401... • 939 views • 0 helpful votes

Hello :
If you can hear a free running motor it may a belt has come off or is worn or broken, remove the cover and check the capstan drive belt as this is the main belt the puts the unit in certain modes, the unit sounds to me like it is stuck in a certain mode so the micro is locked up, inspect all belts and make sure none are egg shaped, if you find one that is replace it, you can also purchase some rubber rejuvenator that restores grip to belts and the capstan roller at a local electronics supply store like FRY'S Electronics etc....

Kenwood CT 401... • 69 views • 0 helpful votes

hola mi equipo kenwood ud551m tiene averiado micro funciones del amplificador donde lo puedo conseguir al componente gracias ana desde uruguay

Kenwood CT 401... • 586 views • 0 helpful votes

Sounds like you have either a speaker wire exposed and/or crossed. Or speakers that are capable of too much wattage/ohms resistance for the receiver to match.

Kenwood CT 401... • 194 views • 0 helpful votes

please check the VDR in primary supply side.its directly connect to bouth N&Live wire connections of supply.

Kenwood CT 401... • 1,831 views • 0 helpful votes

sound output section trouble.can you remoove and shall we start rectifing the problem.

Kenwood CT 401... • 433 views • 0 helpful votes

power problem of power amplifier .
if you can open the cover we can give try to solve this problem.

Kenwood CT 401... • 497 views • 0 helpful votes

There are sensor leaf switches that may not be contacting properly or the drive belt may be too slack to position meachanism properly. Have it checked by pro/tech

Kenwood CT 401... • 1,141 views • 0 helpful votes

Replace capacitor 110 (47uf 25v), it fixed my problem, should cost about 25 cents and take about 1 hour of your time :-)

Kenwood CT 401... • 2,189 views • 7 helpful votes

Karla, Equipment and water especially SALT water (AND SALT AIR) don't mix very well. The constant high moisture environment affects all the connections (the wires) the rca connectors (where one thing plugs into another, AND the switches. The wires may LOOK good but the connections may not be. When you say "all seems to be in good condition" tell me specifically how you checked them. Sometimes they LOOK good, but ar not making connection. While your stereo is ON, get in there and wiggle everything and see it the speakers come back on.

My first guess is your amplifier/reciever. Does it have speaker switches? If it does, move them up and down or click them many times to see if you can work the corrosion a little. This may help.

I'll try and help, let me know some of the stuff I've asked fo above.

Kenwood CT 401... • 131 views • 0 helpful votes

The remote is nothing more than a device to change the contents display face. The code for the unit is embedded into the unit behind it, so the old code will work. It will not even notice you changed the remote control. If you bought a remote control for a different Kenwood audio, then it is a lottery. You can program a bespoke remote, they are set to one device, or a range of devices sharing the same code.

Kenwood Audio Remote Control New OEM Replacement ... > KenwoodAudio
NEW Kenwood Audio & CD Remote Controls. ... VR-208, RC-R0607, A70-1194-05. VR-2080, RC-R0907, A70-1191-05. VR-209, RC-R0607, A70-1194-05. VR- ... and also ..

Kenwood Audio... • 28 views • 0 helpful votes

Not finding what you are looking for?
Audio Players & Recorders Logo

24 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Audio Players & Recorders Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

The Knight
The Knight

Level 3 Expert

76587 Answers


Level 3 Expert

6126 Answers

Are you a Kenwood Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kenwood Audio Players & Recorders

  • Kenwood Audio Players & Recorders

Most Popular Question

kenwood cassette receiver rx 28

  • Audio Players & Recorders