20 Most Recent Kenwood CT 401 Hi-Fi Stereo Dual Cassette Deck Single Dual Cassette Deck - Page 6 Questions & Answers

is there a standby button? Or you can just try to turn it off that works for mine.

Kenwood Audio... • Answered on Jan 11, 2019

lenz cleaning kit --or cleaner on a q-tip

Kenwood Audio... • Answered on Dec 13, 2018

There are no user serviceable parts, the power unit may have a fuse or capacitor that has failed. If you want to look into fixing it then it could be a long haul with lots of test gear. On the other hand you may be able to get just the power board.

Kenwood Audio... • Answered on Dec 08, 2018

The turntable needs to be turning. If it is not a manual turntable. , all arm motion is controlled by the spinning plater,. At the end of the record it may shut off with the tone arm on the record or even return the arm to the rest post before shut off. Unless it has a control that is marked START or REJECT it may be a TT that was not designed to put the arm on the record

Kenwood Audio... • Answered on Nov 22, 2018

The Kenwood KR-V8070 has no digital audio inputs; it only has analog inputs. You can see the manual's diagram of the rear input/outputs starting on page 4 at ManualsLib: https://www.manualslib.com/manual/287040/Kenwood-Kr-V8070.html?page=4#manual . If you need to connect a device that doesn't have an analog audio output, you will need an analog to digital audio converter. This is one version: https://www.amazon.com/SANOXY-Analog-Digital-Converter-Adapter/dp/B005F20756 . You will need to supply all of the audio cables separately. The later KRF-V8070D does have coaxial and optical digital audio inputs. I hope this helps. Cindy Wells

Kenwood Audio... • Answered on Oct 05, 2018

Sometimes it is dirt that has got in the works that causes these sorts of problems. You can take the top cover off the machine and give it good clean inside. You can use Servisol Video 40 to clean it with cotton buds. But before that check that there is no damage to the mechanism first.

Kenwood Audio... • Answered on Aug 12, 2018

It would be normal practice to connect the Equaliser via the tape in and out of the amp, to the Equaliser in and out. If you are using a tape deck, then that goes into the Equaliser's sockets for tape decks. I wouldn't use the Equaliser on any of the Dolby or other coded sound modes as it could effect the signal.

Kenwood Audio... • Answered on Jun 20, 2018

Not finding what you are looking for?
Audio Players & Recorders Logo

24 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Audio Players & Recorders Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

The Knight
The Knight

Level 3 Expert

76587 Answers


Level 3 Expert

6126 Answers

Are you a Kenwood Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kenwood Audio Players & Recorders

  • Kenwood Audio Players & Recorders

Most Popular Question

kenwood cassette receiver rx 28

  • Audio Players & Recorders