20 Most Recent Kenwood CT 401 Hi-Fi Stereo Dual Cassette Deck Single Dual Cassette Deck - Page 5 Questions & Answers


Hi Kamran, do you have the remote control to test the operation? If the remote control works and the device does not respond, you will probably have a problem in your Onkio's function zone. Find a specialized technical service Greetings Franco Dosil Hola Kamran, tienes el control remoto para probar el funcionamiento?, si el control remoto funciona y el aparato no responde, seguramente tendras un problema en zona de funciones de tu Onkio Busca un servicio tecnico especializado Saludos Franco Dosil

Kenwood Audio... • Answered on Apr 19, 2019


The best thing to do is look on Ebay or Amazon for a docking station that has connections for a stereo receiver.

Kenwood Audio... • Answered on Apr 19, 2019


Hi Tsuyoshi, what's happening with your Kenwood, is that it is protecting, check the connections and speaker connection cables, in case there are any short circuits in them, also check the speakers, testing them with another amplifier that you know works in this way you are ruling out possible faults If you find all cables and baffles in good condition, then you have a power supply problem or speaker outputs If so, go to a specialized technical service Hola Tsuyoshi, lo que esta pasando con tu Kenwood, es que se esta protegiendo, revisa las conexiones y cables de conexi?n de parlantes, por si hay alg?n cortocircuito en ellos, tambi?n revisa los bafles, probando con otro amplificador que sepas que funcione de esta manera vas descartando posibles fallas si encuentras todos cables y bafles en buen estado, entonces tienes un problema de fuente de alimentaci?n o salidas de parlantes, si es as? dir?gete a un servicio t?cnico especializado

Kenwood Audio... • Answered on Apr 16, 2019


Hi Fredi, if your amplifier has PLAY input and REC output, to connect a cassette recorder or other recording system, you connect the equalizer output indicated as "LINE OUT" to the PLAY input on your Amplifier and the equalizer input indicated as " LINE IN "to the REC output of your amplifier, you must select in the amplifier the key that allows you to listen to the input you used to connect the equalizer Another way would be if your amplifier has preamplifier output, indicated as "PRE OUT" and amplifier input, indicated as "AMP IN", usually has some bridges that connect the output to the input, remove them and use two paras RCA-RCA cable sets to make the connections Hola Fredi, si tu amplificador tiene entrada PLAY y salida REC, para conectar una cassetera u otro sistema de grabacion, conectas la salida del ecualizador indicada como"LINE OUT" a la entrada de PLAY en tu Amplificador y la entrada del ecualizador indicada como "LINE IN" a la salida de REC de tu amplificador, deberas seleccionar en el amplificador la llave que te pernita escuchar dicha entrada que has usado para interconectar el ecualizador otra manera seria si tu amplificador cuenta con salida de preamplificador, indicada como "PRE OUT" y entrada de amplificador, indicada como "AMP IN", generalmente tiene colocados unos puentes que unen la salida con la entrada, los retiras y utilizas dos paras de juegos de cables RCA-RCA para realizar las conexiones

Kenwood Audio... • Answered on Apr 16, 2019


Hello Kamran, for what you comment, it is very likely that you have produced a false contact in the internal connections of the display, go to a specialized technical service and sure they will solve the problem Hola Kamran, por lo que comentas, es muy factible que haya producido un falso contacto en las conexiones internas del display, acude a un servicio tecnico especializado y seguro resolveran el problema

Kenwood Audio... • Answered on Apr 16, 2019


Do you feel menu button is working or not compare to other buttons, Menu button it self is problem or sometimes if other buttons are pressed, menu or other button will not function. Good luck..

Kenwood Audio... • Answered on Apr 04, 2019


These excerpts from the user's manual.... USB Connecting a USB device You can connect a USB mass storage class device such as a USB memory, Digital Audio Player etc. to the unit. • For details about connecting USB devices, see page 70 . • You cannot connect a computer or portable HDD to the USB input terminal. • For playable file types and notes on using USB devices, see page 75. When a USB device is connected... The source changes to "USB" and playback starts. • All tracks in the USB device will be played repeatedly until you change the source. [PAGE 75] USB playback Playable files on a USB device • This unit can play the following types of files stored in a USB mass storage class device. - JPEG/BMP/PNG/MPEG1/MPEG2/MP3/WMA/ WAV/AAC/FLAC/H.264/WMV (VC-1) • This unit can recognize a total of 5 000 files and 250 folders (a maximum of 999 files per folder). • Make sure all important data has been backed up to avoid losing the data. Notes on using a USB device: • This unit may not play back files in a USB device properly when using a USB extension cable. • USB devices equipped with special functions such as data security functions cannot be used with the unit. • Do not use a USB device with 2 or more partitions. • Depending on the shape of the USB devices and connection ports, some USB devices may not be attached properly or the connection might be loose. • This unit may not recognize a memory card inserted into the USB card reader. • When connecting with a USB cable, use the USB 2.0 cable. The maximum number of characters (when the characters are 1 byte): - Folder names: 128 characters - File names: 128 characters • Avoid using the USB device if it might affect driving safety. • Do not pull out and connect the USB device repeatedly while "Reading" is shown on the screen. • Electrostatic shock at connecting a USB device may cause abnormal playback of the device. In this case, disconnect the USB device then reset this unit and the USB device. • Operation and power supply may not work as intended for some USB devices. • Do not leave a USB device in the car, or expose to direct sunlight or high temperatures to prevent deformation or damage to the device

Kenwood Audio... • Answered on Jan 28, 2019


I have a Kenwood kvr-9708 and im looking for a rectifier diode 4 leg post pin

Kenwood Audio... • Answered on Jan 17, 2019


You don't need the remote to let it work? you can just use all the buttons on the machine itself to work with it?

Kenwood Audio... • Answered on Jan 16, 2019


I would suggest a problem with the output stage of the power amp. It's more than likely detecting a high current or short and is shutting the outputs down to protect.

Kenwood Audio... • Answered on Jan 15, 2019

Not finding what you are looking for?
Audio Players & Recorders Logo

24 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Audio Players & Recorders Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

The Knight
The Knight

Level 3 Expert

76587 Answers

Kardoc

Level 3 Expert

6126 Answers

Are you a Kenwood Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kenwood Audio Players & Recorders

  • Kenwood Audio Players & Recorders

Most Popular Question

kenwood cassette receiver rx 28

  • Audio Players & Recorders
Loading...