20 Most Recent Kenwood CT 401 Hi-Fi Stereo Dual Cassette Deck Single Dual Cassette Deck - Page 2 Questions & Answers


Use code search on your GE URC to find something that works. If a search through all codes stored in the UIRC fails, try a different one.

Kenwood Audio... • Answered on Feb 01, 2021


Applicable codes would be found in a compatible remote control.

Kenwood Audio... • Answered on Feb 01, 2021


Internal components have failed. Return to Kenwood authorised service for repair.

Kenwood Audio... • Answered on Jan 30, 2021


The first thing to check is the solder connections on the display itself. The display should have a series of pins that you will see on the PC board that is behind the front panel. Resolder the connections on either end. These are the connections that supply both the +and - sides of power. These often develop poor connections. Update this with the results of the resoldering and we'll continue from there if the problem is not resolved.

Dan

Kenwood Audio... • Answered on Dec 30, 2020


The remote is nothing more than a device to change the contents display face. The code for the unit is embedded into the unit behind it, so the old code will work. It will not even notice you changed the remote control. If you bought a remote control for a different Kenwood audio, then it is a lottery. You can program a bespoke remote, they are set to one device, or a range of devices sharing the same code.

Kenwood Audio Remote Control New OEM Replacement ...

www.kenwood.newremotecontrol.com > KenwoodAudio
NEW Kenwood Audio & CD Remote Controls. ... VR-208, RC-R0607, A70-1194-05. VR-2080, RC-R0907, A70-1191-05. VR-209, RC-R0607, A70-1194-05. VR- ... and also http://www.remotecentral.com/cgi-bin/mboard/rc-remote/thread.cgi?2547 ..

Kenwood Audio... • Answered on Dec 19, 2020


Hi, I have kenwood rxd m1md . it was on and it got extra voltage. now its not working. the current condition is now when I turn it on, the display turned on for 2/3 seconds and then it shuts down. few green -------------- dots blinks starts, some times "auto power control on " also displays. Please tell me what happend to this unit? which IC or part have to change? Thank You

Kenwood Audio... • Answered on Dec 07, 2020


These dual plastic type cassette deck hardly warrant a service call due to their price and build but to correct this problem the unit needs to be seen by a Technician. The unit can have a lot of different things wrong with it from broken solder joints to defective or abuse tact switches. If you are asking this question, it means that you are not qualified to work on it yourself. Thus the need for a Service Technician.I am in Chicago area and I work on decks all the time- if you supply a location I can tell you of other shops I know of.

Kenwood Audio... • Answered on Nov 10, 2020


Connect using speaker wires or rca shielded cable depending on the TV connections.

Kenwood Audio... • Answered on Apr 28, 2020


Grasp the lift bar that the tonearm is raised by, and pull it gently up, and push it back down 2 or 3 times. That re-distributes the silicone fluid, and usually brings the nice, slow drop back. No dice?

Kenwood Audio... • Answered on Apr 08, 2020

Not finding what you are looking for?
Audio Players & Recorders Logo

24 questions posted

Ask a Question

Usually answered in minutes!

Top Kenwood Audio Players & Recorders Experts

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers

The Knight
The Knight

Level 3 Expert

76587 Answers

Kardoc

Level 3 Expert

6126 Answers

Are you a Kenwood Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Kenwood Audio Players & Recorders

  • Kenwood Audio Players & Recorders

Most Popular Question

kenwood cassette receiver rx 28

  • Audio Players & Recorders
Loading...