20 Most Recent Ohaus Ranger Heavy Duty Compact Bench Scale RD12LS (24 lb x 0.005 lb), Legal for Trade Questions & Answers

0helpful
1answer

Unwanted lines appearing on one side of paper when copying

This is usually from dust or debris in the unit. IT could be the drum wiper etc. Since you did not post the make and model or how many pages you have run through it in total, it is hard to say.
9/21/2021 2:53:40 PM • Office Equipment... • Answered on Sep 21, 2021
0helpful
2answers

I cant speak english while

i would suggest maybe taking an English class then.
9/20/2021 7:42:07 AM • Office Equipment... • Answered on Sep 20, 2021
0helpful
1answer

My OCE Plotwave 300 won't start up. The front power button flashes a short yellow three times and then a slightly longer green, over & over; any ideas?

Probably a power supply in the Power M Controller. Call an authorized Canon/Oce technician for parts and service.
9/17/2021 11:58:14 PM • Office Equipment... • Answered on Sep 17, 2021
0helpful
1answer

Oce TDS400 Scanner and Printer not connecting to controller

The recovery CD needs special tools and software to run. It can't be reinstalled by the customer. In addition, the controller needs to be relicensed in order for the software to run properly. Call an authorized Canon/Oce technician for parts and service.
9/17/2021 11:58:07 PM • Office Equipment... • Answered on Sep 17, 2021
0helpful
1answer

Oce plot wave 300 shows

You should never blow your machine. The error must be cleared by an authorized Canon/Oce service technician. There is no other way.
9/17/2021 11:57:58 PM • Office Equipment... • Answered on Sep 17, 2021
0helpful
1answer

Oce TCS500 unable to measure media. Help!

The M&C unit needs to be replaced. This is a specialized part and needs specific instructions in order to be replaced properly. Call an authorized Canon/Oce technician for parts and service.
9/17/2021 11:57:51 PM • Office Equipment... • Answered on Sep 17, 2021
0helpful
1answer

I have an Oce TCS400

Print out system settings and the IP address should be on one of the print outs. Log into printer, using System Administrator - SysAdm and change the IP that way.
9/17/2021 11:57:28 PM • Office Equipment... • Answered on Sep 17, 2021
0helpful
1answer

Oce TDS 600 Error Code 10501 and 22019

Protocol versions conflict. Call an authorized Canon/Oce technician for service. The scanner will have to be reflashed with new firmware. This can't be done by anybody other than a technician with proprietary software.
9/17/2021 9:17:41 PM • Office Equipment... • Answered on Sep 17, 2021
0helpful
1answer

Oce plotwave 300. Turn power on and the fan on the power supply comes on. Then I get 3 yellow and 1 green flashing light at the front power button.

There is something wrong with the Power M Controller. Most likely a power supply problem with the 3 amber and one green flashes. Call an authorized Canon/Oce technician for parts and service.
9/17/2021 8:56:24 PM • Office Equipment... • Answered on Sep 17, 2021
0helpful
1answer

My OCE TDS 400 Printer

I would not recommend you opening and cleaning the unit without training. You could cause a lot of damage if you do it improperly causing you money and a lot of headaches. Call an authorized Canon/Oce technician for parts and service.
9/17/2021 8:53:56 PM • Office Equipment... • Answered on Sep 17, 2021
0helpful
1answer

OCE TDS 400

A service operator password will do you no good. The unit needs a cleaning, not a password. Call an authorized Canon/Oce technician for parts and service.
9/17/2021 8:52:48 PM • Office Equipment... • Answered on Sep 17, 2021
0helpful
1answer

OCE PLOTWAVE 360 ERROR 22551

There is an error with the Power M Controller. It is not customer replaceable and you need specific parts and software only available from Canon/Oce. Call an authorized Canon/Oce technician for parts and service.
9/17/2021 8:45:16 PM • Office Equipment... • Answered on Sep 17, 2021
0helpful
1answer

Oce Plotwave 360. What causes errors 15528 and 55228?

There is something wrong with the paper switch, the unit with several crescent shaped guides in the back. Ensure it is properly installed in the unit and all of the paper guides are in place. Occasionally these fail, and the entire paper switch needs to be replaced. Call an authorized Canon/Oce technician for parts and service.
9/17/2021 8:40:21 PM • Office Equipment... • Answered on Sep 17, 2021
0helpful
1answer

OCE TDS300 printer. Print is in stripes - some lighter stripes alternating with normal dark print

It probably just needs a cleaning. Call an authorized Canon/Oce technician for parts and service.
9/17/2021 8:37:13 PM • Office Equipment... • Answered on Sep 17, 2021
0helpful
1answer

Hi i have o problem with the oce plotwave 360. it gives me error code 22553 and 22552

Unfortunately this could be several things. It may be either the controller, Spider PBA or Spider Core. Call an authorized Canon/Oce technician for parts and service since replacement of any of these components requires specialized software that only an authorized service technician will have.
9/17/2021 8:34:54 PM • Office Equipment... • Answered on Sep 17, 2021
0helpful
1answer

Hi i have a problem with oce plotwave 360 give me an error 8512

One of the NTCs in the fuser section is bad. Call an authorized Canon/Oce technician for parts and service.
9/17/2021 8:31:19 PM • Office Equipment... • Answered on Sep 17, 2021
Not finding what you are looking for?
Ohaus Ranger Heavy Duty Compact Bench Scale RD12LS (24 lb x 0.005 lb), Legal for Trade Logo

1 questions posted

Ask a Question

Usually answered in minutes!

Top Ohaus Office Equipment & Supplies Experts

Ekse

Level 3 Expert

13435 Answers

The Knight
The Knight

Level 3 Expert

76763 Answers

Brad Brown

Level 3 Expert

18805 Answers

Are you an Ohaus Office Equipment and Supply Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Ohaus Office Equipment & Supplies

  • Ohaus Office Equipment & Supplies

Most Popular Question

weight not register

  • Office Equipment & Supplies
Loading...