20 Most Recent Motorola DRC450 Remote Control Questions & Answers

0helpful
1answer

Coby tv remote codes for motorola rc-057

Contact ARRIS for Consumers . Mark Motorola Support
5/7/2015 10:33:24 PM • Motorola DRC450... • Answered on May 07, 2015
0helpful
1answer

I need the code to program irc451 remote

To which device do you want codes?
12/18/2012 4:11:10 PM • Motorola DRC450... • Answered on Dec 18, 2012
0helpful
1answer

Program remote

Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
7/27/2012 12:12:38 PM • Motorola DRC450... • Answered on Jul 27, 2012
0helpful
1answer

How do I program an

The best I can do for you is give you the link to the code list, I need to know the make of your tv.

http://broadband.motorola.com/consumers/products/drc450/downloads/DRC450_User_Guide.pdf

You need the adobe reader to view PDF file's if you dont have it here is the link.

http://get.adobe.com/reader/
1/7/2011 5:10:18 AM • Motorola DRC450... • Answered on Jan 07, 2011
0answers
0helpful
1answer

What are the codes to program the remote control?

just search to the google the brand and models and you can find the codes
6/19/2010 3:32:42 PM • Motorola DRC450... • Answered on Jun 19, 2010
0helpful
1answer

The television is stuck on

Hello,
this can solve, you have to Forced to factory default: press and hold [VOLUME ( - )] on the TV and press [MENU] on the remote 2 seconds. Exit: Unplug Power to reset.
If it does not help, the main board need to replace.
Thanks for asking...
6/4/2010 1:15:40 AM • Motorola DRC450... • Answered on Jun 04, 2010
0helpful
1answer

Where do i get a code to make my remote run my tv?

go to

tech.dishnetwork.com
12/30/2009 12:20:24 AM • Motorola DRC450... • Answered on Dec 30, 2009
0helpful
1answer

CAN YOU TELL ME THE CODE FOR tv PANASONIC IN

0250, 0051, 0055, 1062, 0035, 0162, 0225, 0454, 0616, 1162, 1262, 1362,

You can also get the manual with codes here onb link below.

http://broadband.motorola.com/consumers/products/drc450/downloads/DRC450_User_Guide.pdf
11/22/2009 8:39:15 PM • Motorola DRC450... • Answered on Nov 22, 2009
0helpful
1answer

I would like to program it to a Sony tv set that

click on the link http://safemanuals.com/314159.php?k=1049c059a7ceac2a75c394e6a8e2a736&ID=65366&q=MOTOROLA%20DRC450
and you'll have to vote to download the manual. Just click the first star (4 of them in total) to activate the download link. I hoe this helps and good luck!
8348eb1.png
11/11/2009 3:45:08 AM • Motorola DRC450... • Answered on Nov 11, 2009
0helpful
1answer

Our remote control for our

There are three possible causes; here are the solutions for each:

  1. The batteries are dead. They need to be replaced.
  2. The remote has developed a defect. The remote needs to be replaced with the same one from the manufacture or a suitable Universal remote from your local retailer.
  3. The IR receiver in the TV itself has developed a defect. This would require the TV being repaired by a qualified technician who would purchase the circuit board from a parts distributor. You would be responsible for parts and labor if the TV isn't in warranty.
No, the remote can't be repaired if it's now defective. It can only be replaced.
2/3/2009 2:07:28 AM • Motorola DRC450... • Answered on Feb 03, 2009
0helpful
1answer

Programming Remote

turn your tv on then hold the tv button down until all the little buttons on top begin to blink one at a time. it's about a 10 count. then the tv light will remain on while the light is on put in the code and the light will blink after the code is entered. if it is the right code your tv will turn off.
1/12/2009 4:22:00 PM • Motorola DRC450... • Answered on Jan 12, 2009
0helpful
1answer

Codes for Motorola universal remotes

C Please consider using 'auto search' on Motorola. how ? Turn on your TV and point the remote at TV during setup 1. Press and hold SETUP until the LED blinks twice 2. Press the TV POWER key. 3. Aim the remote at your TV and press and hold down the OK key. 4. Release the key when the TV turns off and setup is complete.
1/7/2020 8:22:44 AM • Motorola... • Answered on Jan 07, 2020
Not finding what you are looking for?
Motorola DRC450 Remote Control Logo

Popular Tags

26 questions posted

Ask a Question

Usually answered in minutes!

Top Motorola Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76823 Answers

Joaquim Martins

Level 3 Expert

1128 Answers

ray gallant

Level 3 Expert

73786 Answers

Are you a Motorola Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Motorola Televison & Video

  • Motorola Televison & Video

Most Popular Question

tell me code tv panasonic in

  • Televison & Video
Loading...