Panasonic CQ-VD7500U 7 Wide LCD/DVD/SD/TV Receiver MP3 CD Receivers Car Video Player - Page 6 - Answered Questions & Fixed issues
Won't come on when hooked up
you should check to see if you have your power connected right and the acc, also check your ground wire. but my bet is on your acc. i need more info for a detailed answer
How do I hook up
Different Cars and different Head units have different options for Ipod connections. You have many options which include Auxiliary Inputs, CD changer adapters, FM modulators, Cassette adapters. A good place for the general consumer to go for options is crutchfield.com or their local Best Buy. They will be able to sell you the specific adapters you need for your equipments.
I need to replace the
if all else fails try your local junk yards give them a call ive ben to many junk yards and ive seen some carry as much as 500 radios they will tell you to come look what do you have to loose
My cigarette lighterr is not working
Have you done the basic checks,
-Check all fuses
-Check the wiring behind the radio and be sure its plugged it
-See if you can get another cigarette lighter to switch and test to see if yours is bad
I would say get a multimeter and test all the wires. There could be a ground somewhere in the line that is causing it to not work properly or the fuse could be blown.
Why does my Panasonic DVD
If "Copy & Finalise" is selected
After finalising, the discs become play-only and you can also play them on other DVD equipment. However, you can no longer record or edit.
- You must choose "Copy Only" when you want to record on the disc after the first recording.
- Also, do not Finalise the disc if you would like to record additional programs to the dvd.
After finalising:
- [-R] [-R]DL] [+R] [+R]DL] The disc becomes play-only and you can no longer record or edit it.
- [-RW] You can record and edit the disc after formatting although it becomes play-only after finalising. I’m happy to help further over the phone at
https://www.6ya.com/expert/jeremy_69f3cc28d95bf514
Looking for the installation manual for the
All you need to do is to go to the website below and go through the tabs.
It provides all the necessary information that you would ever need to operate your device properly.
http://www2.panasonic.com/consumer-electronics/support/Video/DVD-Recorders-Players/Mobile-Navigation/model.CN-NVD905U
Hope it was helpful?
No power or dead set
Always on a dead set start by checking from the power supply. check for in line fuse, check for the regulator which feeds the main board and processor section.
A test of the voltage with a multimeter will be needed.
LOOKING FOR MANUAL FOT A
Hi,
I have made this manual available free for you to download at
this link.
Please do leave a vote for the solution. Thanks for using FixYa.
DVD Player for car not
Please clean yor lens by using cd lens cleaner and has it retry. If still fail, replace the lens
Eject button will not work.
Assumptions:
- You are trying to do this on a front loading "slot" type DVD player
- The DVD player does not have a small "pinhole" on the front which would normally be used for manually ejecting discs.
- The DVD player is a type that will eject discs if it can not read them for any reason.
I was able to get my DVD out by:
- Shut off the DVD player
- Carefully slide a piece of thick paper (postcard thickness) as far into the DVD slot as you can. It will probably go in only a couple inches max.
- Turn on the DVD player
- Wait about 20 - 30 seconds. The DVD player should have trouble reading the disc because it is not spinning, thus it will report an error and eject the disc.
- If this doesn't work, odds are you don't have the paper in far enough so you are not preventing it from spinning.
There is no guarantee that this process won't harm your DVD player and/or disc so attempt at your own risk. I can tell you that I've done this several times without damage to either.
Read more:
http://wiki.answers.com/Q/How_do_you_manually_eject_a_dvd_from_a_car_dvd_player#ixzz19SuagswH
12/30/2010 1:46:39 PM •
Panasonic Car...
•
Answered
on Dec 30, 2010
•
1,246 views
How can you test a model 15762536 cy-bg8013zc amp.
What i would do is remove the amp and do a bench test. connecting it to a car stereo outside of the car This way you know it works or not without second guessing the wiring. I leave a Car battery on my bench for this.
Not finding what you are looking for?