20 Most Recent Panasonic TX-32PL10 32" TV Questions & Answers

When turned on,only red signal comes on but the screen dont plz help

Panasonic... | Posted on Jan 02, 2014 | Be the first to answer

Turn on after long time

it could be a capacitor or more failing or the control chip failing. crt tv's don't have mean spare parts. as lcd's etc are more easy to get hold of cheap. you may be able to get hold of a copy chip you can get them for under 7 pounds. capacitors make sure you get the same rating that are on the old set. if they are blue change them to black type as blue only have a heat rating of 85c were as black have a rating off 105c. blue type are only recommended for audio but they put them in to save money. look for rounded tops on any capacitor and change them. also remove any and all the dust from the boards wires etc. as any dampness in the air will stick to the dust and cause problems.

Panasonic... | Answered on Sep 30, 2013

1 Answer

I have a Panasonic TX-32PL10 which has developed a

this may help you. would think the picture control chip is going. here is the service pdf download file.
http://elektrotanya.com/panasonic_tx-32pl10.pdf/download.html

Panasonic... | Answered on Sep 30, 2013

0 Answers

Panasonic: Switch from 'standby' to 'on' without remote?

No solution I'm afraid, but I also have this problem. Please help Dexstar and me: a turbulent two-year-old needs his Cbeebies!

Panasonic... | Answered on May 02, 2010

1 Answer

I have a Panasonic Quintrix which only seems to

You may lose some channels when you retune the TV as the channels have been rearranged. To locate them look at the EPG although you may still find that some channels are no longer available on FREEVIEW. See the following link for additional information

http://www.freeview.co.uk/_retuneinfo/

If the above process does not work then check the link above for additional information and also visit the accompanying site links below to find more information for your model of TV / FREEVIEW box.

For troubleshooting the retune procedure visit http://tvretune.co.uk/troubleshooting/

For specific model information visit http://tvretune.co.uk/productmanuals/

Panasonic... | Answered on Oct 03, 2009

1 Answer

Panasonic TV: TX-28DTX10,VCR nv-HV60 EB, DVD:SC-HT 520

EC means euro connector, I.E. Scart socket. For some reason there is no video signal coming out of the scart cable/out of the VCR or being displayed on the TV. Try plugging the scart plug into a different scart socket and see if that helps.

Panasonic... | Answered on Nov 10, 2008

1 Answer

How to get older panasonic tv working in New Zealand

You will need to have a tuner fitted which will work with the local frequencies. Is New Zealnd NTSC?

Panasonic... | Answered on Sep 25, 2008

1 Answer

Panasonic TX-32PS5

possible that your provider has detected a 'leak' and sent disabling codes

Panasonic... | Answered on May 20, 2007

1 Answer

Model MC140FU1521 plasma TV. Why doesn't it turn on?

1. Open internal fuse
2. Power supply failure

Panasonic... | Answered 3 hours ago

1 Answer

Rm700 codes for Panasonic dvd

Applicable code(s) would be stored in the remote control, if it is compatible.

Panasonic... | Answered Yesterday

1 Answer

Code for Panasonic dvd

Hello, the codes for Panasonic DVD are; 2031,2066,2075,2076,2104,2105,2106,2111,2151,2153,2154

Panasonic... | Answered Yesterday

2 Answers

Can’t get from analogue to digital on my Panasonic viera tv

Have you done a channel scan? This can take a few minutes but it locates and lists all channels If you've not done this already, go into your menu, channels and be sure to enter the receiving input whether it's antenna,cable, or satellite, start your scan and see what channels you're receiving. I sure hope this helps and good luck

Panasonic... | Answered on Jan 06, 2021

2 Answers