20 Most Recent Panasonic DVD-F87 Multi-disc DVD Player - Page 9 Questions & Answers

Is this a plasma TV?

espa?ol!

• Panasonic HDTV Codes :1140,1169,1170,1194,1233,1234,1331,1336,1410,1417,1442.
• Panasonic TV Codes: 1003,1010,1049,1053,1096,1123,1152,1231,1289,1292,1295.
• Panasonic DVD Codes : 2031,2066,2075,2076,2104,2105,2106,2111,2151,2153,2154.

More items...

Remote Control Codes For Panasonic TVs, DVD, HTS

Main board would be where I'd start

Panasonic flat panel televisions are packaged with a small television stand that users can attach to place the television on a flat surface. Some users, after attaching the stand, would prefer to hang the television on a wall instead. If the stand is still attached to the Panasonic TV, you cannot hang the television on the wall. Remove the stand from the TV to hang it on a wall. Step 1 Unplug the power cord from the electrical outlet and lay the television, screen down, on a towel. The towel helps prevent damage to the screen. Step 2 Remove the four retaining screws that secure the stand from the bottom of the television using the Phillips screwdriver. Step 3 Slide the stand out of the television. Place the stand and the screws in a safe place in the event you change your mind and decide to set up the television on the stand again. The television is now ready for hanging on a wall.

If you wish to get some details; check the sites linked here. https://elektrotricks.blogspot.com/ https://electronicshelponline.blogspot.com/ Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault. Search the site by type in the Brand Name of your set, in its search bar at the right side column, and press enter. See it in by Webview with mobile or by desktop. Mobile View has no search box. Screen-shots to defective LCD panels are given. You can see and compare to that to your TVs', and can make sure about the fault to an extent.

Chances are a plastic gear is stripped

Your settings to record are not on the television but on your set top box / PVR. You television remote can do it, but it is actually the linking to the PVR.

If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent. Screen-shots to defective LCD panels are given. You can see and compare to that to your TVs'

All you need to do is load up the disc. When the message pops up that says the disc will only play in a Region B or C player pops up, press "stop" on the remote control. Then press "1" on the remote, followed by "enter." This will bypass the message and load up the disc to play normally.Alternatinely, insert the disc, wait for the region warning, press OK and then 270811.

HOW TO MAKE A COPY VHS TO D GO VIDEO DVD Recorder + VCR VR3930VD

Go to Google images and type in make and model of each one and look at pictures.

Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. https://elektrotricks.blogspot.com/ http://electronicshelponline.blogspot.com/ Blinking codes details to many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty....

Possibly storm damage to the main board. Check your household insurance to see if it covers storm damage with a view to a replacement tv.

https://www.fixya.com/support/r29790007-repairing_own_television

U was not very clear on ur ?

https://elektrotanya.com/panasonic_tx-p42x60b_chassis_gpf16d-e.pdf/download.html Please visit this site to download the service manual of this set. It will have all details. Check these sites too. https://elektrotricks.blogspot.com/ https://electronicshelponline.blogspot.com/

T'Con board fault. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

the back says "DC 9.8V 5.8W" Amps * Volts = Watts. thus Watts / Volts = Amps 9.8 / 9.8 = .5918 Amps. rounded 600mA but I'd suggest a 1A

Something short circuit in the SMPS [power] section circuit, and the pop you heard might be of a blow out fuse. It will be best to contact any service technician. If you wish to get some details; check the sites linked here. https://elektrotricks.blogspot.com/ https://electronicshelponline.blogspot.com/ Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault. Search the site by type in the Brand Name of your set, in its search bar at the right side column, and press enter. See it in by Webview with mobile or by desktop. Mobile View has no search box. Screen-shots to defective LCD panels are given. You can see and compare to that to your TVs', and can make sure about the fault to an extent.