Panasonic DMR-ES10 DVD Recorder - Answered Questions & Fixed issues

My Panasonic is doing the same (displaying HOLD). Did you find out what the problem was?

This is the child lock feature, to stop unwanted use of the unit. Using your remote control, hold down 'enter' and 'return' until a message is displayed.

Try this link.
http://www.download-info.com/dvd/index_new.htm

Mike

If you take it apart an clean it with alcohol it might work. Many times it's the sticky stuff that shorts an clogs up the device. , try it to see cant lose.

Hi!
My DMR-ES10 appears since last month, the same message, and lets myself crazy!


Today, after a desperate try, pressing the buttons, I found the solution:

Simple press the POWER BUTTON and STOP BUTTON of the unit for a few seconds...

VOILá: The UNLOCK message appears in the display and the unit return to operate without the lock message !!!

For Lock again, press the same buttons at same way until appears the Lock message in the display.

This is an undocumented command...

I hope to help you!

Try changing your settings from RGB to Y Pb/Cb Pr/Cr. Its in the BD/DVD Video Output Format settings. Seems there has been a firmware bug and this is the current fix.

You know, that's a good question and one that I wanted answered with this recorder's many problems. But there is not one, I'm afraid. I just kept researching on the net until I found enough solutions to figure out repairs. However, I have one that is still running strong after 4 years (with minor tweaks) and one I just had to chuck. Post your problem and you may find a solution. If it's electronical rather than User, you might be out of luck and better off looking at newer brands. If it is just a User hiccup, most are pretty easy to figure out, especially after someone tells you what it is !!! Good Luck.

this could help you ftp://ftp.panasonic.com/pub/Panasonic/call_center/firmware/DVD_REC/DMRES10/ES10-FRM-INSTALL.pdf my best guess

OK, whats the problem ?

make this steps and fix it. Merry Christmas Turn on your DVD player.

• 2

Open the DVD player's main drive, also commonly called the DVD "tray." The region cannot be changed while a DVD is in the machine, so many DVD players require the tray to be open as an extra precaution.

• 3

Push "Info" or "Setup" on your remote.

• 4

Use the remote to select the "Region" option as indicated on your TV screen.

• 5

Select "Region 9" to change the system to multiregion formatting. Regions 1 through 8 represent specific geographic locations and will not allow multiregion playback.

Follow the instructions on page 34 of the manual at http://www.specsserver.com/CACHE/FILE22462.PDF

If only on some DVD's may not be the unit, possible issue when recording etc---the unit is not smart enough to only fail on certain discs unless it happened during recording---a mismatch of some type.

Just found the answer in another post, it works.

Hold down the "1" button and the "Enter" button together for about 10 seconds while pointing at the player. This seems to "reset" the remote and everything works fine.

which solution? God bless you

see this cause and remedies:Does not play disc

1. No disc. - Load a disc into the tray.
2. Disc has been loaded upside down. Place the disc with the label side up.
3. Disc region code does not match region code of the player.
4. Disc type is not the correct type to play.
5. Disc is damaged or dirty. Clean the disc or try another.
6. Moisture may be condensed inside the unit. Remove the disc and the leave the power on for one or two hours.

Finally the OPU optical pickup unit contain lasser beam, NOT are reading the TOC from Disk, YOU Must go to the repair shop Tv FOR fix it.see the diagramGod bless you

For U61 errors:
Turn unit off
flip down front a/v input panel
simultaneously press the channel up and stop buttons for at least 10 seconds.

Visit this site for more details. Type in the site name Electro-help either to Google or Yahoo search box and click search. It is an electronic equipments service help site. All details you want are there. Note the position of hyphen in between words in site name, when you type it in. The site will appear as it is in web.

HelloIt will be best to get this set repaired by the authorised service center for Panasonic at your town. The printed circuit boards are ver complicated to follow any one who has no experience in repair to these type of sets. OK.

Hi,Download the manuals from the link below.Enter model numberi.e DMRES-10 and click on search.Click on selection,agree to the terms and download.www.panasonic.co.uk/html/en_GB/Support/Downloads/220239/index.html#anker_222458Hope this helps.Thanks!

Click here to download the manual.