20 Most Recent
Questions & Answers
I have a Panasonic pv-c1320
Here are some Panasonic codes that Comcast lists on their website: 21062, 20035, 20162, 20225,
20614, 20616, 21035
(but the code depends on which remote you have, check Comcast's website for more info)
You can also try to manually search for the code:
Turn the TV on
Press TV or AUX
Press and hold "Setup" until TV/AUX blinks twice
Enter 9911 and press "Power" using the Comcast remote
Press "Channel Up" until device powers off
Press "Setup" to lock in that code
Please let me know if you found this helpful.
Have a great day!
on Mar 16, 2011
What is the TV remote controller code for a
Universal remote codes for Panasonic TV/VCR combo are:-
Direct Code Entry
- Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
- Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
- Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
- With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
on Mar 04, 2011
The only thing that you are able to program without the remote is the language, channels, and time by pressing and holding the play and FF button for five seconds until the tv turns off, turn it on again and you will get what i just mentioned...
on Jun 04, 2009
Cannot program cable to tv
if your are using a cable box,all of your channels will be control only on the cable box.so, what you are going to do is use the remote control of the cable box.
on Nov 07, 2007
How many watts does the tv take, anybody know?
Here's the link for the user manual if you need it;
Check page 39.
120vac - power on = approx 69W
I wouldnt get an inverter too close to that figure, but a 200w inverter should do - just check the inverter specifications to verify if the rating is actual power output - many inverter manufacturers are a little creative with their model names etc, but the real info has to be somewhere on the box.
If in doubt then the best way is to evaluate your battery system capacity and usual recharging input, and match the current drawn by an inverter to half that figure, see what power inverter size you can manage. if you buy bigger, you get more watts per dollar usually, and you may want any surplus capacity later for another item.
Also running inverters up towards their maximum often will shorten their life dramatically.
Hope this helps :)
on Jun 27, 2007
Not finding what you are looking for?