20 Most Recent Panasonic PV-DR2714 27 in. TV/VCR/DVR Combo Questions & Answers


You should have its remote control to turn it ON. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchased a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. http://electrohelponline.blogspot.com/ Check this link too. http://remotesearch.blogspot.com/ If you see these sites by "MOSAIC" or "Magazine" view will make surf easier. Universal remote controls are available at most of the electronic spare part selling shops or online by Ebay or Alibaba.com.

Panasonic... • Answered on May 19, 2014


Hello BobbyYou haven't given enough details about the fault to your Combo. What do you mean my 'power button has coninuity on board'. I assumes that you get power LED at the front of your device lights up when you switch ON the main power switch, and the unit refuses to power ON and work further. If so, just make a factory reset to this set as it will reset the memory IC. To reset the unit to its factory reset do the folloing. But to do this, the power LED on the front panel of the unit should light up. Otherwise, the fault will be to its power regulator section. To reset the unit to factory reset:[1] Turn the Power ON.[2] Hold down both PLAY/REPET and FF on the unit more than 5 seconds. The power will shut OFF. Please ignore "NO CASETTE" warning.[3] Perform initial set up refering to its user manual. You can see instructions to initial setup at page [16] of the user manual to your device. OK.

Panasonic... • Answered on Dec 07, 2011


i have same problem with vcr , all mecahnism ok but dvd ok but vcr does not work all mechanism ok beccause i check manul its and are ok let me know if you knw somethins , in your case chech manual it open the dvd internal and check for work manual . wilfred

Panasonic... • Answered on Oct 10, 2009


The power LED blinking ten times is indicative of issues with the voltages on Sub 5V, Main 3.3V, DTV 9V or the Tuner Power and the board in question is the "A-Board". Also, make sure that your units fan and airflow is not inhibited.

Panasonic... • Answered on Mar 13, 2021


Sounds like T'Con board problem. It will be best to contact any service technician to make it sure. i don't think this is a user repairable fault. If you wish to get some details; check the site linked here. Pull up older posts. https://electronicshelponline.blogspot.com/ https://elektrotricks.blogspot.com/ Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent. Search the site by type in the brand name and model of your set, in its search bar at the right side column, and press enter.

Panasonic... • Answered on Mar 13, 2021


If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ https://elektrotricks.blogspot.com/ faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent.

Panasonic... • Answered on Feb 26, 2021


Have you got the tv aerial connected into the dvd?

Panasonic... • Answered on Feb 16, 2021


The LED display does not show? I don't no what to do?please help
4_6_2016_9_29_32_am.jpg4_6_2016_9_29_33_am.jpg

Panasonic... • Answered on Feb 09, 2021


1. Open internal fuse 2. Power supply failure

Panasonic... • Answered on Jan 17, 2021


Applicable code(s) would be stored in the remote control, if it is compatible.

Panasonic... • Answered on Jan 16, 2021


Hello, the codes for Panasonic DVD are; 2031,2066,2075,2076,2104,2105,2106,2111,2151,2153,2154

Panasonic... • Answered on Jan 16, 2021

Not finding what you are looking for?
Panasonic PV-DR2714 27 in. TV/VCR/DVR Combo Logo

4 questions posted

Ask a Question

Usually answered in minutes!

Top Panasonic Televison & Video Experts

Demonic-2011
Demonic-2011

Level 3 Expert

513 Answers

The Knight
The Knight

Level 3 Expert

76573 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Are you a Panasonic Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Panasonic Televison & Video

  • Panasonic Televison & Video

Most Popular Question

proline tv will not turn lost remote

  • Televison & Video
Loading...