Top 20 Panasonic SC-AK200 CD Shelf System Questions & Answers

Download its service manual. It will have all details about error codes.

F61 usually means the amp has detected a short or a severe microprocessor error.


Generally speaking, an amp attempts to protect itself from heat, shorts, overloads and operator exuberance by refusing to turn on or stay on.

Overloads can be from excessive periods of high output or marginally low impedance loading by the speakers; and shorts would be wiring issues or a speaker blowing up.

You should be able to feel if it's hot. WHY is it overheating? Make sure it has sufficient ventilation on all sides and that vent holes are not blocked by dust balls. Ensure the fan (if equipped) is running as designed (some only operate on demand). Clean dust and debris from it.

If the amp comes back on after cooling, you're lucky. They only have so many self-protection cycles in their lives so continuously resetting or cycling their power without addressing the cause can do more harm than good.

If it protects immediately on a cool power up you should disconnect the speaker connections and try it 'naked'. If it comes up then diagnose which lead(s) are shorted. If it does not come up the problem is internal and should be left to an experienced and competent hands-on tech.

Read this procedure to possibly fix the remote:
http://remotes.com/remotes/servlet/rs?a=Display&contents=help_deadremote&uuid=A12963989782821
They also sell replacement remotes.

http://remotes.com/remotes/servlet/rs?v=1&o=c&o=c&a=Search&uid=0&m=SC-AK200+&uuid=A13101189236741

Zoom in on the picture of the original remote provided on the site (or look at your own) and get the actual remote model number.

or check eBay: search for "(model of the device or the remote) remotes", check the 'include description' box. Usually cheaper than the vendors.

You need to clean or replace the optical pick up.

my panasonic system are held plz solve tha problm

its got a door problems a part in the cd deck bracks off and its basturd to fix.

the mechanical disc loader inside is probably damaged. Depending on how much damage was done, you can probably open it up and fix it yourself.

Do you have the manual, I think panasonic put some of there fault codes in the back.

Seems to have lots of people saying it could possibly be a power supply fault, an amp fault or shorted speakers.. Some people have gone to the extreme of actually buying new components and trying to unsolder and resolder to try to fix it themselfs.

Try contacting Panasonic, they will be able to advise you better ot possibly repair / replace the system.

Hello,
HiFi system actually turned Off when you press power button and display of hello, heavy, vocal etc is demo mode of this system and it activates when unit goes to power off.
You can change its settings like not to show demo mode etc and this procedure is described in owner's manual.
Thank you.

dear friend:after apply fresh and new battery and install it in right direction bring an normal radio set -put it in am postion tune dial in position between channel and press power button in remote many times you will hear clicks eash time you press the button if you hear the clicks clearly the problem will be in the player .

you need,tray alignment or electronic failure,see a doctor.

panasonic sa-vk-31-gc-sm - service manual

Elektrotanya https://elektrotanya.com > download ·Translate this page Download PANASONIC SA-VK-31-GC-SM service manual & repair info for electronics experts. ..

The nearest you will get is the service manual. Dowmload the service manual and follow the dissasambly and reassambly instructions to the letter, otherwise it will not work correctly and the timing will be out. https://elektrotanya.com/panasonic_sa-ak20.pdf/download.html

Try disconnecting all of the speakers except the left and right main speakers. If it works, check the wiring at the back of each speaker to make sure there aren't any shorts between the terminals. Better yet, just inspect the terminals both at the audio unit and the backs of the speakers. Stray strands of wire reaching across to the other terminal or exposed wire on the other side are a common problem. If you have that all cleaned up and still have the error, you may have shorted transistors in the output amp of one of the channels, very likely the subwoofer. This may be caused by shorted speaker wiring, or the amp may have failed on its own. In either case, you would have to replace both of the output transistors for that channel (they may be built into a power amp module, in which case the module must be replaced). This requires soldering skill, and the knowledge to identify the transistors and check them with an ohmmeter. Most of the time, it's a basic job for any skilled electronic technician. (I did run into one model that would have required two days of disassembly labor just to get at the failed transistors - I told the customer that wasn't designed for service and he would be better off buying something different to replace it.)

Question moved from Microwave Ovens https://www.google.com/search?q=Panasonic+SL-MP35+service+manual Electro Tanya says she has it. ..

PFA manual

If your Panasonic DVD/CD player is not reading CDs and is making a grinding noise, there could be several issues at play. Keep in mind that specific troubleshooting steps may vary based on the exact model of your DVD/CD player. However, here are some general suggestions:

1. Cleaning the Optical Lens: Over time, the optical lens inside the DVD/CD player can accumulate dust and debris, leading to reading issues. You can try using a CD/DVD lens cleaning kit to clean the lens. Follow the instructions provided with the cleaning kit.
2. Check the Disc: Ensure that the discs you are using are clean and free from scratches. Even new CDs can have manufacturing defects. Try using different CDs to see if the issue persists.
3. Inspect the Loading Mechanism: The grinding noise you're hearing could be related to a problem with the loading mechanism. Open the disc tray and visually inspect for any obstructions or foreign objects that may be hindering the movement of the tray.
4. Reset the Player: Turn off the DVD/CD player and unplug it from the power source. Wait for a few minutes, then plug it back in and turn it on. This can sometimes resolve temporary issues.
5. Firmware Update: Check if there are any firmware updates available for your DVD/CD player. Visit the Panasonic website, enter your model number, and look for firmware updates and instructions on how to perform them.
6. Professional Inspection: If the issue persists after trying the above steps, it may be necessary to seek professional assistance. There could be a mechanical problem with the internal components of the player that requires specialized attention.

If you are unable to find the exact manual for your specific model online, you may want to contact Panasonic customer support directly. They can provide you with model-specific advice and may have access to manuals or troubleshooting guides for your particular DVD/CD player.

Original CD Stereo System comes with remote control and that does not need to connect. Moreover, buttons and switches are also given for manual use. If you want to use universal remote control, please specify make and model.

Panasonic SC-AKX710 user manual (English - 104 pages)

Manuals.ca https://www.manuals.ca > hi-fi systems > Panasonic Manual Panasonic SC-AKX710. View the Panasonic SC-AKX710 manual for free or ask your question to other Panasonic SC-AKX710 owners.

Panasonic SC-AKX710 Operating Instructions Manual ...

ManualsLib https://www.manualslib.com > manual > Panasonic-Sc-... Panasonic SC-AKX710 Manual Online: Preparing Media. Disc 1 Press [x] on main unit to open the disc tray. Put in a disc with the label facing up. ..