Raymarine RC400 GPS Receiver - Answered Questions & Fixed issues
Error code on my RC400 Raymarine GPS 0x4000091 and
It would appear you need to perform a hardware reset.
6.2 Resetting the System
Three types of reset are available for the Chartplotter:
• Power-On Reset: When you turn the display unit off, then on again,
the screen reverts to the chart display with all windows cleared.
• Hardware Reset: This procedure enacts a power-on reset if the unit
has entered a lock-up condition.
To perform a hardware reset, press and hold the POWER key for 9
seconds.
Hope this helps.
Good Luck!
Raymarine C70 MFD wont 'Restart GPS'
Perform a factory reset: If your Raymarine C70 MFD is not responding, you can try performing a factory reset. This will restore the device to its original settings and may resolve the issue. To perform a factory reset, follow the instructions provided.
.
Factory Reset procedure for a A/C/E-Series Classic Multifunction Display (raymarine.com)
Check GPS source: It's possible that there's some confusion in the system configuration about what GPS source is in use, and this might cause your false Route Complete alert. You can check what's shown in Home > Settings > Network > Data Sources on the Master display.
Update software: If the above steps do not work, you can try updating the software of your Raymarine C70 MFD. You can download the latest software update files from
C Series Classic Software ' Raymarine
11/1/2023 6:00:07 AM •
Raymarine GPS
•
Answered
on Nov 01, 2023
•
36 views
Charts won't load on raymarine e80 chart plotter
If you are having trouble loading charts on your Raymarine E80 chartplotter, there are several things you can try to troubleshoot the issue:
1. Check the chart card: Make sure that the chart card is inserted correctly and that it is compatible with your chartplotter. Some chartplotters require specific types of chart cards, so check the user manual or contact the manufacturer to ensure compatibility.
2. Check for software updates: Make sure that your chartplotter has the latest software updates installed. You can check for updates on the Raymarine website or by contacting customer support.
3. Check the chart source: Make sure that the chart source is set correctly on your chartplotter. If you have multiple chart sources (e.g. internal memory, external card), make sure that the correct source is selected.
4. Check the chart format: Make sure that the chart format is compatible with your chartplotter. Some chartplotters only support certain chart formats, so check the user manual or contact the manufacturer for compatibility information.
5. Check for obstructions: Make sure that there are no obstructions blocking the GPS antenna or interfering with the chartplotter's reception. Obstructions can include tall buildings, trees, and other objects that block the line of sight to the GPS satellites.
6. Reset the chartplotter: Try resetting the chartplotter to its default settings. This can sometimes clear up software glitches or other issues that may be preventing the charts from loading.
If none of these solutions work, you may need to contact Raymarine customer support for further assistance or repair.
Take care and have a great day! -Alex
4/26/2023 6:13:36 PM •
Raymarine GPS
•
Answered
on Apr 26, 2023
•
116 views
Radar Raymarine HD wiring diagram, how to wire to Raymarine C120 unit
After nearly 4 years I dunno if you got this sorted.
The question is ambiguous, as Raymarine radar comes with wiring harnesses; the display end is a plug-and-play 12-pin male to the harness end female; the other end goes up the mast in a plastic sleeve to prevent damage to the 8-pin connector and the 2 or 4 power cables (depends on "light" or "heavy").
There's a means of connecting a digital radar to the C120 but I don't have that so don't know the specifics.
Is this the sort of information you were looking for?
7/10/2021 7:53:35 PM •
Raymarine GPS
•
Answered
on Jul 10, 2021
•
756 views
Audio problem
This question would be a lot easier to answer if you specified the make, model and year of your car and whether or not you have the stock stereo installed or an aftermarket one. If it's an aftermarket stereo, you would want to add the brand and model information for that.
4/29/2014 2:57:35 AM •
Raymarine GPS
•
Answered
on Apr 29, 2014
•
41 views
Fuses blowing on raymarine e series 125 chartplotter
It sounds like the fault is within the plotter itself. There should be any component, which shorts with main power supply, causes the blow of fuse to overload. I do advice you not to try to repair it by yourself, and contact the authorized service center.
Gopakumar Gopalan Google
Sophistacated testing instruments are needed to repair this type of devices.
3/21/2014 12:20:57 PM •
Raymarine GPS
•
Answered
on Mar 21, 2014
•
230 views
Trying to change the channel
There is no international or local frequency - the frequencies are determined by international standards. But there are 2 sets of them: A - for ship stations; and B - for ground stations. Your radio is strictly a ship station one - it can't operate the 77B channel for ground stations.
But your station has an Local/DX capability - meaning that it can be set to ignore distant stations . This is done by reducing the sensitivity of the receiver. Switching between them is done directly in the Menu -pres the CALL/MENU button to enter it, it's the second entry in there. If you really need to pick up very distant stations you will have to upgrade the antenna to a Yagi one.
1/16/2011 8:59:42 PM •
Raymarine GPS
•
Answered
on Jan 16, 2011
•
78 views
Ihave aproblem with a435i gps unit, the other week
On Sat 21 Nov I disconnected the unit and checked to make sure no pins had snapped off inside the connection port, I then connected the unit to a spare power cable in the garage(it has an in-line fuse and ac adaptor fitted), powered on the unit then scrolled thru the various menus powered off unplugged the unit, then re-connected it back in the boat and went for a cruise up the local river yesterday Sun 22 Nov and the unit worked fine, so my guess is a good as anyone's as to how it was fixed, most electrical appliances have gremlins of some kind, could have been low power from the old battery(replaced it), I definately checked and re-checked the connection though, mine are covered in vicks vapour rub (a suggestion from Navcom - local dealer for raymarine).cheers and many thanks
11/23/2009 6:10:12 AM •
Raymarine GPS
•
Answered
on Nov 23, 2009
•
191 views
My Raychart won't take a fix. I've been advised
Maybe you backup batterie inside you plotter is low If yor plotter shows you that you are somewhere in Afrika on the atlantikcoast you have to change only the battery inside the plotter it kost few euro.
The next possibility is that you have problems with you extern gps antena look after broken kable or try it with another Gps antena
10/13/2009 5:56:00 PM •
Raymarine GPS
•
Answered
on Oct 13, 2009
•
757 views
Raymarine gps sounder
This is a common problem if the GPS is hooked up to an electronic heading sensor such as an autopilot. If the heading sensor is not calibrated properly, the boat will appear to be facing the wrong direction.
If you have an autopilot, consult the installation guide and perform the sea trial procedures. That should get your boat lined up properly.
7/21/2008 3:09:22 AM •
Raymarine GPS
•
Answered
on Jul 21, 2008
•
445 views
My Conlog Prepaid electricity Meter is showing a spanner and not bring in light. What should I do?
Question edited for clarity. It is 'Conlog', not 'cinlog'.
It means there is a technical fault. Phone the company that supplies your electricity. It is their meter and distribution network.
What are the causes of a spanner appearing on ...
Quora
https://www.quora.com > What-are-the-causes-of-a-spa...
Jul 15, 2023 - A spanner icon anywhere indicates a need for maintenance. If the light is orange, get the service as soon as. If the light is red, call a ...
3 answers ยท 6 votes: Spaaner that appears on any equipment is the symbol of due for maintenance. Follow the OEM ...
Help! My Prepaid Meter Is Showing A Spanner Icon.
Nairaland
https://www.nairaland.com > prepaid-meter-showing-spa...
Mar 7, 2022 - I noticed my neighbours still had. On getting outside to check the conlog ip54 prepaid meter, I saw a spanner icon and a negative reading of the energy balance.
Please Help With My Conlog Prepaid Meter - Technology Market
Aug 6, 2020
I Need A Technician To Fix This... - Nairaland / General - Nigeria
Jul 22, 2019
Please Help With Conlog Prepaid Meter - Technology Market
Oct 9, 2022
Help My Prepaid Meter Stopped Displaying! - Nairaland Forum
Aug 3, 2023
More results from www.nairaland.com
..
3/8/2024 9:09:19 PM •
GPS
•
Answered
on Mar 08, 2024
•
26 views
Not finding what you are looking for?