20 Most Recent Sony Walkman WM-FX277 Personal Cassette Player - Page 7 Questions & Answers


Go to check your instruction manual of the L5 Sony and you will find every labelled parts or alternatively Google the product it will be helpful... So you can fix it back.

Sony Audio... | Answered on Mar 08, 2019


This item is discontinued, but your best bet to find one is on ebay.com. There are no new ones currently listed, but several used ones. If you could find a new one, it would be a used one as soon as you turn it on, so the difference may not be meaningful, right?

Sony Audio... | Answered on Mar 07, 2019


https://www.sony.com/electronics/support/articles/00032501

Popping sounds can be caused by a poor connection between the speakers,speaker cables, and amplifier. ... Wires can also become pinched in furniture or damaged in other ways, which can cause them to fray and make popping sounds. Check the cable at the amplifier and speakers and replace it if it is damaged.Jul 7, 2016

Sony Audio... | Answered on Mar 05, 2019


Remove the unit and take a look inside the trays as there may be a CD that is jamming the tray as it may not be lying flat on it. Be care not to jar the unit too much as they are very sensitive and shouldn't be moved without tightening the screw that holds everything from moving during transport. There usually is a tiny hole at the front of the tray that you can push in a straightened paper clip and it will manually open the tray.

Sony Audio... | Answered on Mar 03, 2019


Just as a reminder... we aren't concierge service- a simple google search or manufactures search would have led you to the information you wanted- maybe quicker than waiting here for an answer. Anyway here you go https://www.sony.com/electronics/support/digital-voice-recorders-icd-series/icd-px333

good luck
https://www.6ya.com/mrmmike

Sony Audio... | Answered on Mar 02, 2019


This is a protection warning. There is a problem with the power output. Make sure that all the speaker wires are NOT shorting-out (visual inspection). You can test the cables with a multi-tester set at the 20 ohms scale, by unplugging from the amp and testing each cable pair at the terminal. They should read anywhere between 4 and 10 ohms resistance (resistance close to 0 indicates a short)..
If the Speakers/cables are good then you have a burned power output stage or a cold solder joint at the fault sensor circuit.

Sony Audio... | Answered on Feb 24, 2019


"Onkyo TX-NR801 AV receiver using a coaxial digital cable but cannot get sound from the AV receiver." In onkyo amp, choose DVD, then in digital audio settings choose coax1. Then enter. In blu ray player, digital output selection choose auto or bitstream .

Sony Audio... | Answered on Feb 12, 2019


Sorry no. Unless the old phono preamp built into that, Which is a new thing just started in the last few years with new turntables. Old ones need a phono preamp with RIAA curves built in and GAIN as the cartridges are very low output.

Sony Audio... | Answered on Feb 06, 2019


Thru the Tape Loop (TapeIn/Tape Out). If you don"t have that, not possible

Sony Audio... | Answered on Feb 06, 2019


Need digital out of TV to go into the Soundbar. Toslink cable. Is that hooked up> Otherwise...NO sound.

Sony Audio... | Answered on Feb 06, 2019

Not finding what you are looking for?
Sony Walkman WM-FX277 Personal Cassette Player Logo

Popular Tags

7 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Audio Players & Recorders Experts

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

Are you a Sony Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sony Audio Players & Recorders

  • Sony Audio Players & Recorders

Most Popular Question

lost instruction manual wm fx277

  • Audio Players & Recorders
Loading...