20 Most Recent
Questions & Answers
My sony walkman d-ne320 atrac3plus
On your player there is a switch, usually on the bottom or inside the CD compartment. It will say "hold". You need to switch this in the opposite direction that it is currently in. Afterwards you should have no problems. This feature is designed to lock your player so that you don't accidently push buttons when your active.
on Apr 05, 2011
Sony walk man mp3
try these methods
**Drag and Drop**
Connect your MP3 player to the computer. Some MP3 players connect directly to a USB port, while others connect to a USB port by way of a specific USB connector that comes with the MP3 player. Open the folder on the computer that contains the music files you want to transfer. This is usually the "My Music" folder, available from the "Start" menu, but it can be any folder where you save your music files. Scroll down to the song you want to transfer to the MP3 player. Right-click on the title. When the options are displayed, click on "Send To." Scroll down the "Send To" options and select your MP3 player. This can be listed as your MP3 player's name or as "Removable Drive." Click on this selection. Continue this process until you have transferred all songs that you want to your MP3 player.
--**Windows Media Player**--
If you have a large playlist to transfer, you may prefer to do it from your media player, such as Windows Media Player. Once your MP3 player is connected to the computer, open Windows Media Player. Click on the "Sync Music" tab. Drag songs that you want from your Windows Media Library over to the "Sync Music" column to create a playlist. Click the "Begin Sync" tab at the bottom once you have all of the songs on your playlist. This action will sync all of the songs to your MP3 player with one click. Disconnect your device once songs have been transferred by clicking on the "Safely Remove Hardware" icon in the bottom-right side of the desktop tray.
on Oct 07, 2009
Sony walkman nwz-b172f verbinden M. USB
Battery is 100% discharged. Therefore, PC's USB with 5V/500mA set up has not enough power to start up the charging process because loading current is greater than the set up, therefore USB is disabled immediately due to sudden current load.
Battery must not be discharged 100%
If it happens then the supplied AC adaptor must be used firstly because it is providing 5V/800mA power. After a couple of minutes the unit can be connected to PC without problem then it can continue the charging during file transfer, etc.
on Jun 28, 2020
My sony radio SRF M97 AM does not work well The FM is fine
What can I do to fix the problem
I suspect there is either a problem with the radio (AM side) or most likely it is a matter of poor AM signal strength where you are and/or high levels of interference.
With FM reception the wire lead of the earphones acts as a fairly efficient antenna but AM reception is via the internal ferrite rod aerial that also is part of the tuned circuit and consequently is not only highly directional but is sensitive to vertical/horizontal orientation - if the signal is polarised vertical the antenna is more efficient when it too is vertical, unfortunately horizontal polarisation is more common.
Development of AM receivers stopped decades ago due to it falling out of favour because of high levels of interference around population centres causing much dissatisfaction and a move to FM and over the last two decades an increased interest in digital radio.
on Jun 26, 2020
Not finding what you are looking for?