20 Most Recent Sony CDX-M630 CD Player - Page 3 Questions & Answers

it requires special pull out keys that are inserted on sides of unit .These came with unit if puchased new .If not call one of your local car stereo installing shop and ask if they have spare set .You may have to remove this face ring around face then you insert keys one on left side/ right side .then pull unit out

What has most likely happened is the when the car died it was probably jumped off. Anytime a vehicle is jumped off, especially off a much larger vehicle, a "jump" of voltage is sent throughout the vehicle also known as a surge. The surge travels through the vehicle's electrical system and sometimes blows bulbs, fuses and relays. The back of your radio should have a fuse check it because It's probably blown. If the fuse is good refer to your vehicle manual to locate the fuse panel and find the radio fuse it might be blown. Hope this helps

Hi,
You need remote under following part number for CDX-M630
47711014 RM-X117 REMOTE CONTROL for $33.95
It is available in Sony Accessories Store (copy link in browser search bar)

http://servicesales.sel.sony.com/ecom/accessories/web/productSearch.do?searchOperation=modelSearch&searchText=CDXM630

Thanks.

Hello susanmillan,

If it's not the head unit, and it's not the speaker, then it must be a problem with the wire going to the speaker. When you hit a bump, the wire shorts or opens intermittently causing the faulty sound. Some insulation could have rubbed off. There could be a bad pin in a connector. The wire could have some broken strands. It could have become pinched against something sharp.

The good news is, it's really an easy fix. Just have your installer make sure that the sound is OK at the wiring harness itself, and run a new wire from there to the speaker.

Hope this helps.

you probly have a bad wire or wires arching

Part Store is good place to buy required part of CDX-M630. type part number (would be written on flexible wire) in search box and enter to see result.

manuals here

can you send me a pic of the way you have it hocked up now and the wireing diagram.
ill be able to walk you threw the proper hook up

sounds like the flexi cable is faulty, try www.carradiospares.co.uk

Mark

I just bought a new car with this radio already in the car. I don't know how to get the face plate to open to get a cd in.

run the lens cleaner through a couple times if that doesnt work then your lazer eye could be bad send out for repair or ebay a new one and sell that one on ebay there are some people who will buy it broken cause they can fix it cheap and sell it good luck...

you need to use the original remote to enter the code. Try these codes one of them should work...

You need to press reset after each attempt.



CODE 1: MODE SOUND OPEN ATT

CODE 2: ENTER OPEN MENU 6

CODE 3: OPEN DISC+ 1 LIST

CODE 4: SEEK- SEEK+ 3 OPEN

CODE 5: OFF 4 OPEN SOURCE

CODE 6: 2 OPEN DSPL SOUND

CODE 7: OPEN 5 ATT SEEK+

CODE 8: DISC- DSPL OFF OPEN

CODE 9: SEEK+ SOUND OPEN ENTER

CODE 10: DISC- LIST SEEK- OPEN

CODE 11: OPEN 4 LIST OFF

CODE 12: DSPL SOURCE OPEN 1

CODE 13: MENU 2 MODE OPEN

CODE 14: 5 DISC+ OPEN ATT

CODE 15: 3 MENU SEEK- OPEN

sounds like you have a faulty head unit

Sorry

Mark
www.blueice-electronics.co.uk

I have a few suggestions that may help. Have you checked the fuses?There is on on the stereo and one in the car's fuse box. Are all of theconnections from the wiring harness secure? Make sure these are tightand show no signs of damage, especially the ground connection. Also, ifthe face is detachable, check the connectors (on the face and thestereo) for damage or dirt or anything that would prevent a goodconnection. Pushing the reset button should not have prevented you fromoperation of the unit, so it has to be either an external fault (likewhat I described above) or an internal problem. How old is the CDplayer? If it is still under warranty, I would call Sony or go to theirwebsite and speak to one of their techs. You can go to the site byclicking on the blue link: Sony Support Hope this helps... Please take time to rate how helpful this was. Thanks and good luck!

First, make sure that the face is the correct one for the unit. I have had a couple of friends buy from salvage yards and the owners of the yards will take the faces off and put them all in a box - but forget which one goes with which. If this is the correct face for the unit, and all of the connections are good, the face should be displaying "CODE IN". This is where you would enter the unlock code - with the REMOTE. If you don't have the remote, then I'm not sure if you can unlock the unit. I've been to a few sites researching this question and have yet to find a way to enter the code without the remote. If you didn't spend very much on the unit, then it's not a big loss, but I would look into buying one new. It's almost impossible to get the default codes from the manufacturer for a used unit without the proper identification - i.e. receipt, product registration code, etc. Hope this answered your question. Please take time to rate how helpful this solutions was. Thanks and good luck.

Have you checked the fuses? Make sure that the fuse on the stereo and the one in the car's fuse box are still good. This could be the problem. Check them out and get back to me. Hope this helps...

possibaly the issue is the ribbon cable that connects the faceplate to the head deck i had the same issue

Mine did the same...it will stop working all together soon...repace the ribbon you should be fine

ebay