20 Most Recent
Questions & Answers
Sony dvd tray locked
had the same prob with a sony dav dz it kept saying locked but after hours and hours of pressing random combinations it came off im sure it was unplug plugback in then hold power and open tray and tap stop or a combination of those buttons.i woud try it again on mine to make sure but i do not want to lock it again.
on Nov 06, 2019
I need to change my region code
Your best bet in saving time for region code changes,is to go to videohelp.com and look for their section on DVDHacks.
Here they have a massive search engine , put your dvd details in and wait to see if you have a code
on Nov 03, 2009
The protect message indicates that a problem was deteceted inside the machine. normally this means that the output amp has a problem. Please post the model number of the receiver or amplifier and I'll post additional details. Also, this problem is currently listed under DVD players. I believe that this should be under receivers. If you can, please move this discussion to the correct category.
on Feb 11, 2009
Display says "LOCKED", won't eject disk, all other functions work. Need unlock procedure.
How I got my DVD
from ”lock” condition
My DVD (Panasonic m:
DMR-ES10) had gone to ”locked” condition without any warning.
Perhaps the reason
was that I transfered the machine when it was on and recording was going…
Guidebook didn´t help to resolve the problem, neither
Internet. Finally I managed to solve the promlem . This is how i did step by
is now unlocked” (picture of open lock)
After this DVD works normally.
on Dec 13, 2007
Hdmi port stopped working on sony bravia
I have a Sony Bravia model KDL-46s5100 that had the same problem. All HDMI ports stopped working. I don't know why this works but unplug the TV for about 30 sec, then plug it back in and hold down the power button on the tv for 10 seconds. Like I said I don't know why this works but it worked for me. Good luck.
Sony Televison &...
on Oct 13, 2020
Sony kdf-55e2000 red light blinks 3 times- tv will not go on
3 blinks is a error code "lamp door not properly closed" but what it really means is the lamp door is warped from heat from the lamp.
The door if removed has a plastic peg on its back side-the peg when door is in place engages a tiny lever behind it----
What to do?
Remove door and engage the lever with something not metal==turn set on and if it comes on you know the door is the issue.
DO NOT LOOK DIRECTLY AT THE LAMP- DO NOT OPERATE SET PROLONGED TIME WITH DOOR REMOVED OR COVERED WITH ANYTHING ELSE==THIS IS ONLY TO SEE IF THE DOOR AND SWITCH ARE YOUR PROBLEM.
Sony Televison &...
on Sep 16, 2020
Not finding what you are looking for?