20 Most Recent Sony DVP-NC80V DVD Player Questions & Answers

Either a dirty or bad optical pickup in the player which is what reads the disc.

Sony DVP-NC80V... | Answered on Jun 12, 2012

Removed outer cover.
Unscrewed center screw on 5 disc exchanger tray.
Removed exchanger.
Operated system without tray.
Received error message E 27 00
Replaced exchanger tray and tightened center screw.
Operated player with eject button and it functioned correctly.
Replaced outer cover. Tested with DVD. All OK.


Sony DVP-NC80V... | Answered on Mar 22, 2011

One reason is the door mech is out of track or broke ,other reason is that there is somethng in there

Sony DVP-NC80V... | Answered on Feb 15, 2011

check you connections, try a different input.

Sony DVP-NC80V... | Answered on Dec 10, 2009

  1. try resetting by unplugging power of device
  2. look at the manual and see if there are any options related to audio type and multi channel modes. Try toggling to different settings if you see any related options.

Sony DVP-NC80V... | Answered on Oct 22, 2009

It is probably a oveheating problem

Sony DVP-NC80V... | Answered on Jul 17, 2008

Here's a link to a similar problem - http://www.fixya.com/problems-solutions/t103270,p181041/LG-DVD-Players.aspx post back if it doesn't apply

Sony DVP-NC80V... | Answered on Mar 23, 2008

If this happened after a power surge, it's possible that one or more capacitors in the power supply have been damaged, and that could cause the player to act up. Otherwise, the symptom you're experiencing is a classic one of the laser pickup not reading the tracks on the disc (assuming you meant to say it switches the disc after approx 5 Seconds). If it is within the warranty period, it would be worth getting looked into. You can get a good CD/DVD player to act up like this by placing the discs upside down on the platter.

Sony DVP-NC80V... | Answered on Sep 03, 2007

Set-up (Programming) procedure is too much to type in here, and is not practical and it will differ brand-to-brand remote controls. If you wish to get more; check the sites linked here. It has set-up code list & set-up procedure to many popular brand remote controls. One among it has general set-up codes to check with TVs and other devices are given, in the order of the 'device's brand name list' in alphabetical order. Pull up older posts. Search the sites by type in the brand name to your device in its search box at the top right part of the display window. It will help you to find the document easily.

Sony Televison &... | Answered 2 days ago

Try this:

Press and hold the Power button on the TV (not on the remote), and then (while holding the button down) plug the AC power cord back in. Continue to hold the button down until the white LED light appears. It will take approximately 10-30 seconds for the LED light to turn white.

Sony Televison &... | Answered on Nov 19, 2020

A fault causes the light to blink and the number of blinks indicates the area of the fault.

Sony Televison &... | Answered on Nov 18, 2020

Since the symptoms have changed with replaced parts, I would suggest putting your old parts back in and see if the original symptom returns. If, when you put your old parts back in the colored vertical lines come back, then the most likely issue is one of the replacement parts is bad.

Sony Televison &... | Answered on Oct 26, 2020

Not finding what you are looking for?
Sony DVP-NC80V DVD Player Logo

15 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76443 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Nasir Muhammad
Nasir Muhammad

Level 2 Expert

229 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sony Televison & Video

  • Sony Televison & Video

Most Popular Question

error message e 26 00

  • Televison & Video