Top 20 Sony KV-27V55 27" TV - Page 4 Questions & Answers

It could be, or it could be the power supply to them. LEDs change colour depending on how much voltage they get. https://www.fixya.com/support/r29790007-repairing_own_television ..

Programming a Coolsat remote to a Sony TV is a straightforward process that can be done in a few steps. Here's how you can do it:

1. Turn on the Sony TV: Make sure that the Sony TV is turned on and in the correct input mode so you can see the on-screen menu.
2. Locate the code list: Check the manual that came with the Coolsat remote for a list of codes for Sony TVs. The codes are usually organized by brand.
3. Try the first code: Using the Coolsat remote, press and hold the "Code Search" button until the light on the remote turns on. Then, enter the first code for Sony TVs into the remote. You can usually do this by pressing the number buttons on the remote.
4. Test the code: After entering the code, press the "Power" button on the remote. If the Sony TV turns off, then the code is correct and you can proceed to the next step. If the TV doesn't turn off, try the next code from the list. Repeat this process until you find a code that works for your TV.
5. Store the code: If you've found a code that works for your TV, press and hold the "Code Search" button again until the light on the remote turns off. This will store the code in the remote's memory and allow you to use it to control your TV in the future.
6. Test the remote: Finally, test the remote by using it to control the TV's volume, channel, and other functions to make sure everything is working correctly.

If the codes listed in the manual don't work for your TV, you may be able to find additional codes online or by contacting the manufacturer. You can also try using the "Code Search" function on the remote, which will allow you to find a code by scanning through all the codes in the remote's memory.

Try replacing the tcon board, if that doesn't fix it chances are the panel is bad

Connecting your old RDR-HXD890 player/recorder to your Sky Q box and TV can be done by using the appropriate cables and connections. Here is an example of how you can connect the devices:

1. Connect the HDMI output of the Sky Q box to the HDMI input of the RDR-HXD890 using an HDMI cable. This will send the video and audio signals from the Sky Q box to the RDR-HXD890.
2. Connect the HDMI output of the RDR-HXD890 to the HDMI input of the TV using an HDMI cable. This will send the video and audio signals from the RDR-HXD890 to the TV.
3. Connect the aerial cable to the aerial input of the RDR-HXD890
4. Connect the RDR-HXD890 to the power outlet
5. Turn on all the devices and set the TV to the HDMI input where the RDR-HXD890 is connected.

By connecting your devices in this manner, you will be able to watch and record TV shows and movies from your Sky Q box through the RDR-HXD890 and display them on your TV.

1. Power button: Locate the power button on the front or side of the DVD player. Press and hold the button for a few seconds until the device turns on.
2. Power outlet: Unplug the DVD player from the power outlet and then plug it back in. This should turn the device on.
3. Power strip: If the DVD player is plugged into a power strip, turn off the power strip and then turn it back on. This should turn the device on.
4. Manual: Consult the manual of your DVD player if you have one, it may have a way to get the device out of standby mode.
5. Using the buttons of the DVD player: Some DVD players have a button on the front or back of the device that can be used to turn it on and off. If the device has a button, try pressing it to turn it on.

It's worth noting that these methods may vary depending on the specific model of your Sony DVP-C670D DVD player. If none of these methods work, you may need to purchase a replacement remote control or consult a professional for assistance.

You could try testing the power supply by using a multimeter to look for voltage and see if any of the components are bad. If you can't find a schematic of the power supply, you may want to consider visiting a local electronics store or repair shop to get more help. Additionally, you could try replacing the fuse to see if that helps, but it would be best to confirm that is the issue before replacing it

If you're trying to control your Philips 65PFL4864 TV with the remote control of your Sony BDP-S370 Blu-ray player (model RMT-B107A), you will need to find the remote control code that corresponds to your TV. The codes for different brands and models of TVs can vary depending on the remote control, but you can try using one of the following codes:

• Code 020
• Code 021
• Code 022
• Code 023
• Code 024
• Code 025
• Code 026
• Code 027

To use the codes, you need to follow these steps:

1. Turn on your TV and Blu-ray player
2. Press and hold the "TV" button on the remote control of your Blu-ray player.
3. While holding the "TV" button, enter one of the codes listed above.
4. Release the "TV" button and check if the TV responds to the commands from the remote control.
5. If the TV does not respond, try the next code in the list.

You should be able to find the instructions on how to program your remote control in the manual of your Blu-ray player. If you don't have the manual, you can download it from the Sony website or contact the manufacturer for assistance. Keep in mind that these codes are not guaranteed to work, and it's possible that your remote control may not be able to control your TV. In this case, you may need to consider purchasing a universal remote control that is compatible with your TV and Blu-ray player.

Hi You can try. Part 1: Manual Factory Data Reset with TV buttons Press and hold the Power button and Volume Down (-) buttons on the TV (not the remote), and while holding the buttons, plug the power cord back in. Continue to hold the buttons down until a green LED light appears near the Sony logo on the TV front. ----------------- How do I factory reset my Sony Bravia TV manually?"); display: inline-block; height: 24px; width: 24px; margin-top: -1px; transform: rotateZ(-180deg);"> Factory data reset

1. Press the HOME button, then select [Settings] - [Device Preferences] - [Reset] - [Factory data reset].
2. Select [Erase everything]. If you have set a PIN code on your TV, you will be prompted to input it when you select [Erase everything].

kindly check the power board if all voltages are there

The 6-time blink code for the Sony KE-42TS2U indicates a backlight error. This may be due to a faulty backlight inverter board, or a problem with the power supply to the backlight inverter board. It is recommended to have the TV serviced by a qualified technician to diagnose and repair the issue.

perform a soft reset. Turn off the TV, unplug the connector from the socket, and wait 2 minutes. ...

If your Sony VPL-CS5 Red LCD isn't working, you may need to replace the lamp. You can purchase a replacement lamp from the manufacturer's website or from an authorized retailer. You may also need to check the power cord and connections to ensure that everything is properly connected. If the issue persists, you may need to contact Sony customer service for further assistance.

Hi, please run a channel scan on your tv before checking for the issue again. If the issue persists, please remove all accessories from the tv before restarting it. If necessary, you can then power cycle the tv. Otherwise, you can move onto running a factory reset on your Sony tv. Thank you.

The power supply is not working or there is a power black out or a fuse is bad or the wiring is either loose or no longer working.Or the receiver is bad.

I'm sorry to hear that you are having issues with your Sony Bravia TV. It sounds like you have already tried a number of troubleshooting steps, including replacing the boards and performing a software update. If you have no picture on the TV and the Sony logo is flashing on the screen before going off, it could be an issue with the software on the TV. Here are a few additional troubleshooting steps you can try:

1. Disconnect the power cord from the back of the TV, then unplug the TV from the wall outlet. Leave it unplugged for at least 60 seconds, then plug it back in and try turning it on again.
2. Check the HDMI connections on the back of the TV to make sure they are secure.
3. If you are using an HDMI cable to connect the TV to a device (such as a cable box or DVD player), try using a different HDMI cable.
4. If you are using a cable box or satellite receiver, try resetting it by unplugging it from the power outlet for 60 seconds and then plugging it back in.
5. If the TV is still not turning on or the picture is not coming back, it could be an issue with the software on the TV. In this case, you may need to try a factory reset. To perform a factory reset, follow these steps:

• Press the Home button on the remote.
• Select Settings.
• Select Product Support.
• Select Customer Support.
• Select Factory Reset.
• Follow the on-screen instructions to complete the factory reset.

Keep in mind that a factory reset will delete all of the data and settings on the TV, so you will need to set it up again as if it were a new TV. I hope these steps help, and please don't hesitate to ask if you have any further questions.

The programming code for the Sony BDP S500 to be used with the RM-AAP013 remote is 31758. Here are the steps to program the remote:

1. Turn on your Sony BDP S500 player.
2. Press and hold the "S" button on the RM-AAP013 remote until the "Amp" button flashes.
3. Enter the programming code 31758 using the number keys on the remote.
4. Press the "Enter" button.
5. Wait for the "Amp" button to stop flashing.
6. Test the remote to ensure that it is working properly with the Sony BDP S500 player.

To program a Sony TV, you will need to follow these steps:

1. Press the "Menu" button on your remote control.
2. Use the arrow buttons to navigate to the "Settings" menu, and then press the "Enter" button.
3. Navigate to the "Installation" or "Setup" menu, and then press the "Enter" button.
4. Select "Programming" or "Channel Setup," and then press the "Enter" button.
5. Follow the on-screen instructions to scan for available channels. This will typically involve selecting your cable or antenna source and then initiating the scan.
6. Once the scan is complete, use the arrow buttons to navigate through the list of channels and select the ones you wish to keep. Press the "Enter" button to lock them in.
7. Exit the menu when you are finished.

Note that the specific steps may vary depending on the model and software version of your Sony TV. You may refer to the manual of the TV to get more information.

Hi, please check whether the sony remote code book includes vizio as a category. If not, then the two devices are not compatible and you'll need to call vizio to figure out which remotes are compatible with your tv and then choose from that list before programming the new remote to your tv. Thank you

If you're seeing a solarized picture on your Sony TV XBR-43X800G, there are a few things that could be causing the issue. Here's how to fix it. First, check the input source. If you're using an HDMI cable, try switching to a different input. If you're using a component cable, make sure it's securely connected to the TV. If the input source isn't the issue, try resetting the TV. To do this, unplug the TV from the power outlet and then plug it back in. Once the TV is back on, go to the Settings menu and select Picture. Scroll down to Picture Mode and select Standard. If you're still seeing a solarized picture, there may be an issue with the TV itself. In this case, you'll need to contact Sony customer support for assistance.