Top 20
Sony FD Trinitron WEGA KV-30HS510 30" TV Questions & Answers
Hooked up xbox360 to my trinitron, but get no
you most likely hooked it up incorrectly, or you don't have the little tab set to display in the proper format (HDTV/standard) on the a/v cord. Or ou purchased a broken 360. Oh your a/v cord could be busted too.
1/9/2010 6:32:29 AM •
Sony FD...
•
316 views • 0 helpful votes
Audio intermittent and popping
Hi,
A loud pop in the speakers is one of two things. 1. DC voltage from the amp instead of the normal AC.(If this is the case the amp is slowly burning the voice coils of the speakers.) 2. a large spike to the input of the amp. (This would be less common, but possible.) The problem is probably in the amp itself. The speakers will get spoilt if not taken care.
Thanks
5/31/2009 1:38:43 PM •
Sony FD...
•
69 views • 0 helpful votes
IMAGE IS TILTED
theres a service bulliten out on this problem called"TVP0424" It explains about wide screen format problems and adjusting vert bow and hH trap adjustment. Good Luck
4/25/2006 5:52:22 PM •
Sony FD...
•
261 views • 0 helpful votes
I NEED CODES FOR MY NEWSTAR NTR-B28Z FOR MY SONY TV
ChatGPT 3.5
User
I need code for newstar ntr b28z for my Sony tv
ChatGPT
Unfortunately, I can't provide specific code for your Sony TV remote without knowing the exact model number. However, you can usually find the code in the user manual of your Sony TV or by contacting Sony customer support. Alternatively, you can try using the auto-search feature on your newstar ntr b28z remote to find the correct code for your Sony TV.
User
need code for newstar ntr b28z
ChatGPT
To find the code for your Sony TV using the Newstar NTR B28Z remote, you can try these general steps:
Turn on your Sony TV.
Press and hold the "TV" button on your Newstar remote until it blinks twice.
Enter the code for Sony TVs. Some common Sony TV codes are: 0000, 0011, 0080, 0111, 1234. If none of these work, you can proceed to the next step.
Press the "Power" button on the Newstar remote. If the TV turns off, the code is correct. If not, try a different code.
Once you've found the correct code, press the "TV" button again to lock it in.
If none of the provided codes work, you might need to consult the manual of your Newstar remote or contact their customer support for assistance.
Code for Sony tv? I am using a universal remote Keyin RM-168E.
All about Universal Remotes and why in 2024 no one uses them!.
https://www.fixya.com/support/r29872378-universal_remotes_no_facsimile_remote
SONY 3 & 4 digit universal codes are
002, 000, 011, 080, 111, 006, 071, 128, 1904, 925, 0000, 0834, 0810, 1685, 1786, 1032, 1972
..
Not finding what you are looking for?