20 Most Recent Sony KLV-S32A10 32 in. HD-Ready LCD Television - Page 3 Questions & Answers

There is a power button on top of the tv. There are 6 buttons on the top of the tv and the power button is the one on the right. They are located about the center of the TV.

THIS IS A SPECIAL FOR THAN OTHER PRODUCT.

the part number for the B board is A1148426A, there is a newer version A1148426E, I checked the internet and I found one here:
http://www.shopjimmy.com/showparts.cfm?item=378903&ps=3789&pn=3
This part is a "pull", meaning it was used at some time and removed from a unit that was likely damaged and not worth repairing. At around $70, it's a bargain; the going rate is around $170-180. If you are handy with tools and take your time you should be able to replace it yourself. Good luck and be sure to rate this oslution.
Thanks!

If the menu and OSD are OK, that probably eliminates the panel and TCON board. That still leaves the A3U board which does all the switching and intial processing of the video signal and the B board which does final video process and panel drive. The is one simple way of narrowing it down: hook up a PC to the 15 pin VGA connector (make sure the PC is set for a 60 hertz refresh rate). If you can see the problem when using the computer input, it is most likely the B board. The B board is the most likely cause of video distortion problems. Please be sure to rate this solution. Thanks!

http://www.kb.sony.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=C243178&sliceId=1&docTypeID=DT_KNOWLEDGEARTICLES_1_1&dialogID=9180848&stateId=0%200%2012107423

Try this link.( You'll need to copy and paste it into your address bar since it is so long.) this may be just what you need. Your remote control however may need to be reprogrammed, so I would look for the manual download for your Remote using the model # of the remote, Unless you are using a service procided remote, and then you would need to find the information in that manual (Direc Tv, Comcast, whatever.)


I hope this helps. Thank you for using Fixya

The user manual that you have requested can be found at http://www.docs.sony.com/release/KP51WS500.PDF
If you have more problems please ask!

Tim Nolan

Try this site:

http://www.answerbag.com/articles/How-to-Control-a-TV-Using-a-Bose-Lifestyle-Remote/2daa6a56-9364-852a-ab88-5e9bc722f4a1

I hope this works. It took a lot of research to find this. It sounds like your dilemma is a common one.
Thank you for using Fixya and Please remember to rate the solution.

click on this link to get it

Very likely a power supply problem.
Most modern sets monitor power supply performance continuously and if a higher drain circuit is drawing excessive juice, they are designed to shut down to avoid burning down your house.
After all, no house, no new TV needed -

I would be sniffing around the top vents on the set to detect possible 'hot' odors coming from it.

Hi.

Your friend is wrong you will get same resolution of 1080i whether you use component or Hdmi.
But you will need a high def input to tv in order to get this resolution EG high def cable box or satellite.
http://dysonmanuals.llc.nu/

Hi,

Could you please provide a pic so I can see exactly what you are talking about. Did you try power cycling the TV?

You probably need to replace the backlight. In parts less than 30$. If you know your way around these things, or know someone who does, it's not a super difficult thing to do. You can get a tutorial that's written for monitors here: http://www.inventgeek.com/Projects/shorts/lcdfix.aspx basically the same procedure for an LCD TV. Good luck!

Question edited for clarity. This is unlikely to work, although I do see the remote has a VCR/DVD Source button. https://www.amazon.ca/Players-Kv-20Fv300-Kv-27Fa310-Kv-32Fs320-Kv-29Fs120/dp/B0874DLQMP And Sony says it is not programable DVP-NS57P The model is not programmable. https://www.sony.com/electronics/support/remote-control-programming/models/dvp-ns57p https://www.google.com/search?q=sony+dvd+remote+codes You can buy a Copycat remote for the DVD Player if yours is lost. https://www.google.com/search?q=DVP-NS57P+replacement+remote ..

This TV is 10 years old and probably requires a service that replaces the backlight invertor or just a power supply issue. Check to see if the light blinks. (That is the fault code and then google the result for more information).

Question edited for clarity, proper name, fix typo. Manual and Reviews

Manuals for HT-CT260

Sony https://www.sony.ca > electronics > support > product Find instruction manuals and brochures for HT-CT260.

Sony HT-CT260 review: Excellent sound that fits nearly ...

CNET https://www.cnet.com > reviews > sony-ht-ct260-review May 7, 2013 - The Sony HT-CT260 is our go-to budget sound bar pick, with excellent sound quality, built-in Bluetooth, an adaptable design, and no major ... Rating: 8.4/10

Sony HT-CT260 Home Theater Soundbar Review

PCMag https://www.pcmag.com > Reviews > Audio > Speakers Feb 28, 2013 - The Sony HT-CT260 soundbar adds Bluetooth to an already highly capable and modestly-priced two-piece audio system. MSRP $299.99. Pros and cons: Excellent value ? Built-in Bluetooth ? Treble response isn't the clearest ? View full list Rating: 4 · ‎ Review by Will Greenwald · ‎ US$225.00 · ‎ Out of stock ..

Pano po ireset ang cybertec 8 in 1? Salamat po

All questions need 'make model (what is is)' as first 3 words in every question please. Television? Stereo? Sound bar? ICE? The grinding noise makes me think you have a cooling fan issue, in which case the flashing LED would be signaling an overheat situation. You can Google sony model blink codes ..

Good set and worth getting it repaired. https://www.google.com/search?q=Sony+KDL+46v51000+parts& https://www.fixya.com/support/r29790007-repairing_own_television ..

ChatGPT 3.5

User
I need code for newstar ntr b28z for my Sony tv

ChatGPT
Unfortunately, I can't provide specific code for your Sony TV remote without knowing the exact model number. However, you can usually find the code in the user manual of your Sony TV or by contacting Sony customer support. Alternatively, you can try using the auto-search feature on your newstar ntr b28z remote to find the correct code for your Sony TV.



User
need code for newstar ntr b28z

ChatGPT
To find the code for your Sony TV using the Newstar NTR B28Z remote, you can try these general steps:

Turn on your Sony TV.
Press and hold the "TV" button on your Newstar remote until it blinks twice.
Enter the code for Sony TVs. Some common Sony TV codes are: 0000, 0011, 0080, 0111, 1234. If none of these work, you can proceed to the next step.
Press the "Power" button on the Newstar remote. If the TV turns off, the code is correct. If not, try a different code.
Once you've found the correct code, press the "TV" button again to lock it in.
If none of the provided codes work, you might need to consult the manual of your Newstar remote or contact their customer support for assistance.

str no