20 Most Recent Sony KP-53S65 53" Rear Projection Television - Page 9 Questions & Answers


Since the symptoms have changed with replaced parts, I would suggest putting your old parts back in and see if the original symptom returns. If, when you put your old parts back in the colored vertical lines come back, then the most likely issue is one of the replacement parts is bad.

Sony Televison &... | Answered on Oct 26, 2020


Yes, It should be. You might need to connect it with a USB wire instead of a HDMI lead. You can the access it through the input button on the remote. The button will probably be in the top left corner of the remote, level with the power button, ( marked with a square with an arrow pointing into it).

Sony Televison &... | Answered on Oct 25, 2020


Use Photo Sharing Plus to Display Photos, Videos, and Songs on Your TV
  1. On the supplied remote, press the HOME button.
  2. Select Settings.
  3. Select System Settings.
  4. Under System Settings category, select Set-up.
  5. Under Set-up category, select Network.
  6. Under Network category, select Renderer Function.
  7. Select On.
Feb 27, 2019

Use Photo Sharing Plus to Display Photos, Videos, and ... - Sony


5 Easy Ways to View Photos on Your TV - Techlicious

www.techlicious.com > tip > 5-easy-ways-to-view-your...
Mar 21, 2019 - If you have a smart TV, you can use a photo viewing app to access ... I think I'm caught in between *real* smart tv's and this sony bravia one :(.

Sony Televison &... | Answered on Oct 25, 2020


I have a Sony Bravia model KDL-46s5100 that had the same problem. All HDMI ports stopped working. I don't know why this works but unplug the TV for about 30 sec, then plug it back in and hold down the power button on the tv for 10 seconds. Like I said I don't know why this works but it worked for me. Good luck.

Sony Televison &... | Answered on Oct 13, 2020


possible control board overheating or video board look for capacitors swelling on boards

Sony Televison &... | Answered on Sep 19, 2020


3 blinks is a error code "lamp door not properly closed" but what it really means is the lamp door is warped from heat from the lamp.

The door if removed has a plastic peg on its back side-the peg when door is in place engages a tiny lever behind it----

What to do?

Remove door and engage the lever with something not metal==turn set on and if it comes on you know the door is the issue.

DO NOT LOOK DIRECTLY AT THE LAMP- DO NOT OPERATE SET PROLONGED TIME WITH DOOR REMOVED OR COVERED WITH ANYTHING ELSE==THIS IS ONLY TO SEE IF THE DOOR AND SWITCH ARE YOUR PROBLEM.

SD TECH

Sony Televison &... | Answered on Sep 16, 2020


An almost complete guess that you are feeding digital into a tv that is incapable of processing it.

HDMI is digital only and an adaptor lead won't convert the signal to analogue. Digital to analogue converters are available but how successful they are I have no experience...

Sony Televison &... | Answered on Sep 10, 2020


No a Sony dvd remote can't program a sanyo tv

Sony Televison &... | Answered on Sep 03, 2020


First turn on device to be programmed. Press what device you want to program (tv) hold it down and at the same time hold power button down. Wait for red light to shut off and come back on. When light comes on remove finger device button and continue to hit power button on & off until device shuts off. Then hit stop button on the bottom off remote.

Sony Televison &... | Answered on Aug 04, 2020


If the screen of your TV is black and nothing is displayed, see the FAQ below: No picture on the TV screen.
When using a TV with the Self Diagnostics option, try the Self Diagnostics test. For details, refer to the following Q&A: How to use the Self Diagnostics option.

Sony Televison &... | Answered on Jul 13, 2020


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. https://electronicshelponline.blogspot.com/
Blinking codes details to many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.

Sony Televison &... | Answered on Jul 01, 2020


Hello
Blu-Ray players' region hack proceedings are yet to come.

Sony Televison &... | Answered on Jun 24, 2020


Follow these steps to unlock the Blu ray:
  1. Turn on the Blu-ray Disc player.
  2. Press and hold the PAUSE or the STOP button until UNLOCKED appears on the front panel display.

Sony Televison &... | Answered on Jun 01, 2020


Fault with the main power supply regulator board. Check and replace damaged component/s at its main power regulator [SMPS] section circuit. Contact any service technician. If you wish to get some details; check the site linked here. Surf the site either in Web View, on a mobile; or by a desktop PC. Pull up older posts.
http://electronicshelponline.blogspot.com/
It will be best to replace the power supply regulator board as card basis rather than making "Surgery" to it; which usually will make loss for both money and time. Even though you can make it right, it will cost around an amount equal to the cost of a new board; including the cost of (spare parts + service charge) More to say, most of the spare parts to it will be difficult to get from open electronic spare part market. This is true to most of the flat panel TV power supply boards; irrespective of its brand and screen size.

Sony Televison &... | Answered on May 28, 2020


Fault with its main board. Short circuited component/s at it. Contact any service technician; or the authorized service center. If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ . In most cases, the main board might have to be replaced. If so, a software [firmware] update too might be necessary.

Sony Televison &... | Answered on May 28, 2020


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/
Blinking codes details of many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.
View the site by desktop or webview on mobile devices to see the "search box". Type in the brand name of your set in search box; to get gathered the related posts.

Sony Televison &... | Answered on May 27, 2020

Not finding what you are looking for?
Sony KP-53S65 53" Rear Projection Television Logo

130 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76466 Answers

Muntejaya Ginting
Muntejaya Ginting

Level 3 Expert

10422 Answers

Nasir Muhammad
Nasir Muhammad

Level 2 Expert

230 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sony Televison & Video

  • Sony Televison & Video

Most Popular Question

sony rear video projector kp 53s65

  • Televison & Video
Loading...