20 Most Recent
Questions & Answers
TV cannot be turned on
Please count the blinks. It should be a repeating count with a pause. This will indicate the problem circuit and allow us to give you details.
A rather older set:picture blinks may be screen controls now set too lowpicture dark same or lens need cleaningcolor off either adjustments or a Convergence issue
Sony kp-53s65 no pic has sounds
Trace the voltage to the main board and you must be able to confirm that the +B to the board is in order. since there is sound the front end sections are in order and the fault relates to a failed drive or video process.Check the power to the lamp circuits if there is no output this is the area to trace.if there is glow on the screen then there is absence of video output drive and it needs a trace. use of signal tracing and injection might be needed or you must get help to confirm before any board or costly spare is changed.
Burnt out EY34
EY34 is a location near a small blue capacitor that commonly burns up; Location number for the cap should be C514 and the values of it are 1,000 pf (pico farad) at 2 KV (2,000 volt rated).Often if it is burnt it is the only problem and both Hitachi and Sony used the same identical part in several of their sets.Let me know if you have questions.sd tech
try replacing your lamp and also resenting your timer make sure to get a Philips lamp and if you kneed a ballast try calling discount merchant they are very good and have original lamps also they trouble shoot any problem you may have with your dlp
Tv showing double image and
Sounds like convergence problem. Fixing the problem requires removing, desoldering and soldering the convergence ICs.
The repair for this may go for a couple Hundred or more..
Best of luck
Where would I purchace these
U must have tools like a soldering iron,a roll of solders,a roll of desoldering braid or a desoldering pump and must have basic skills of doing soldering works?Yes,than tries these 2 websites like Tvrepairworld.com,Tvrepairkits.com to buy a whole tv convergence kit belong to ur tv make and model.The complete convergence kit will came with all and the most common components parts are dying and dead on ur tv make and model in the tv convergence board also with the kit is a tutoring DVD disc.Have no tools and never done soldering work before.Tries this repair at ur own term,after u finish could have complication might not solved ur tv convergence picture problems at all or completely.Or the shop will cost like $300-350 for parts and labors.
Not finding what you are looking for?