20 Most Recent
Questions & Answers
Starts up then 6 red blinks
please go trough this forum for knowing how to discharge capaciotrs
Convergence repair kit used but problem is worse
did you check and replace the two pico fuses on the G board and also the six pico fuses on the D board? If so double check the solder often a pins mounting ring will lift up during the removal and prevent solder connection when doing the install.
My tv is not turning on but the stand by light is still on.
The model listed does not have a standby light, only the power on/off light which is there in case the set does not make it on to blink a error code--specific number of blinksbefore going further can you confirm the model number and add if have sound, or menu etc?
How do i find out if sony kp/57ws510 picture tube is bad
While the set is prone to bad tubes a double or 3d like image is convergence--this model uses two of the STK-392-560 CHIPS for this.Go into customer menu and call up convergence--if off and will not adjust in any area of the screen the chips are bad.
Not finding what you are looking for?