20 Most Recent Sony Grand WEGA KDF-60XBR950 60" Rear Projection HDTV - Page 8 Questions & Answers


Do a factory reset to this set, and then check. To make it factory reset, you have to enter its service mode. If you wish to get some details; check the site linked here. Pull up older posts. https://elektrotricks.blogspot.com/ https://electronicshelponline.blogspot.com/ Service mode entry, adjust and exit procedure to many popular brand TVs are given. Never forget to exit the service mode, after all adjustments have been done. NB: Please read and understand well, the instructions to enter the service mode, before you begin. Be very careful. Note how to "EXIT" the service mode; after entering and adjusting data. This is very important. Service mode entry procedure of almost all Sony TVs [LCD & CRT] are similar.

Sony Televison &... • Answered on Mar 15, 2021


Sounds like backlight inverter problem. Check and replace damaged components, if any. If you wish to get some details; check the site linked here. Pull up older posts. https://electronicshelponline.blogspot.com/ https://elektrotricks.blogspot.com/ faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent. Search the site by type in the brand name of your set, in its search bar at the right side column, and press enter.

Sony Televison &... • Answered on Mar 15, 2021


If it a programmable remote control with a learn function.

Sony Televison &... • Answered on Mar 09, 2021


If you can receive a good signal and your TV can process the signal from off air, then it should work.

Sony Televison &... • Answered on Mar 07, 2021


If you wish to get some details; check the site linked here. Pull up older posts. http://electronicshelponline.blogspot.com/ https://elektrotricks.blogspot.com/ Line, faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent. Search the site by type in the brand name and model of your set, in its search bar at the right side column, and press enter

Sony Televison &... • Answered on Mar 03, 2021


Not sure where delivering 575 Strawberries came from, but I fixed your question a bit, even though I understand none of it!

Program a Remote Control ' Sony Canada

https://www.sony.ca > televisions-projectors > articles
Sep. 2, 2020 - For a complete list of remote control codes and programming ... You'll need the remote control model number to find the appropriate codes ... Can the Remote Control be Programmed to Operate a DVD/VCR or DVD/Receiver ... Missing: strawberry ‎' Must include: strawberry

Sony Remote Codes and Programming Instructions

https://www.directutor.com > content > sony-universal-r...
Programming Instructions, Follow these steps to program the remote control. 1. ... Universal remote control codes for SONY TV ... DBS Receiver Code Numbers: Missing: strawberry ‎' Must include: strawberry

Sony Televison &... • Answered on Mar 03, 2021


STR-S6307 is not compatible with STR-S6707, ON STR-S6707 YOU CAN USE STR-S6708 or STR-S6709 str-s6307-up1tpxdjtbyzz3nucycghl1s-1-0.jpg strs6707 schema small-up1tpxdjtbyzz3nucycghl1s-1-2.gif

Sony Televison &... • Answered on Feb 26, 2021


RCA remote has no set-up codes to program a Sony device. If you wish to buy its original remote control, contact the authorized service centre, or authorized dealer to your device brand. They can either give you a genuine remote control to your device, or can direct you, from where can you purchase a suitable one. To select a proper universal remote control, you should know about the number of digits to its set-up codes. There are 3 digit, 4 digit, 5 digit, 2 digit and even single digit codes, to some brand devices. After confirming this, check the sites linked here. Both the sites have set-up code list and set-up procedure to many popular brand remote controls. Check which brand remote control has set-up code/s to your device brand, and buy that one according to availability? Brand name of the remote control isn't a matter, but it should have set-up codes in its code list, to the device brand you have. Please note: Every new universal remote control will have set-up code list, and set-up procedure along with its pack. Never accept a remote control, that hasn't both of this. For more details about the set-up codes, visit the site http://electrohelponline.blogspot.com/ Check this site too. http://remotesearch.blogspot.com/ Universal remote controls are available at most of the electronic spare part selling shops; and by Online shopping.

Sony Televison &... • Answered on Feb 25, 2021


You could have ordered DVD disc's that are of a different region then that are not working on your DVD player or it could be fake DVD disc's then too. You should always order from reputable business then.

Sony Televison &... • Answered on Feb 21, 2021


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/ https://homenol.blogspot.com/ https://elektrotricks.blogspot.com/ Blinking codes details to many popular brand TVs are given. If blinks continue without any pause, the main board is faulty. Search the sites by type in the brand name to your set, in its search box on the right side.

Sony Televison &... • Answered on Feb 18, 2021


Those blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/ https://homenol.blogspot.com/ https://elektrotricks.blogspot.com/ Blinking codes details to many popular brand TVs are given. If blinks continue without any pause, the main board is faulty. Search the sites by type in the brand name to your set, in its search box on the right side.

Sony Televison &... • Answered on Feb 18, 2021


Most of the cases LVDS cable faulty, If LVDS Cable confirmed that it works fine then its LCD Panel Faulty (O-Cell ), If there are some one who have Re-Bonding Machine than replace its T-Con Board, I hope this will help you to repair your product.

Sony Televison &... • Answered on Feb 16, 2021


There is a system error then. If a red LED is blinking and the TV is not working properly it means that the TV has detected an issue or problem. Most of the Red LED blink conditions will require being service. Check how many times the red LED light will blink and then contact Sony for support.

Sony Televison &... • Answered on Feb 15, 2021


These blinks [flashes] are fault indication (Error Codes). From the number of blinks occur at one time switch ON, you can get an idea about the faulty circuit section inside it. This will make repair easy. These are called blinking codes. Make sure about the exact number of blinking of the standby/power LED, by switching On & OFF the set, for at least two times. Count it carefully. If you wish to get some details, check the site linked here. It has details about blinking codes, and fault locating procedure, to many popular brand TVs and other devices. http://electronicshelponline.blogspot.com/ Blinking codes details to many popular brand TVs are given. Surf the site with patience. If blinks continue without any pause, the main board is faulty.

Sony Televison &... • Answered on Feb 09, 2021


Sony DVP-SR760HP region code - VideoHelp

https://www.videohelp.com > dvdhacks > sony-dvp-sr7...
Post Region code hack posted by ravikalyan_143, September 07 2016: 1. Make sure the DVD player has no disc in it and is powered off 2. Press 12345 on the ...

Sony DVD Player DVP-SR760HP - Uncoding of Region ...

https://forum.videohelp.com > Video > Authoring (DVD)
Dec 10, 2014 - Need help to make my new Sony DVD Player DVP-SR760HP Region Free. My player is suitable for Region 5. I have DVDs of Region 2 since I ... Sony DVP-SR760H Region free unlocking - VideoHelp Forum Dec. 21, 2014 Need Help to make my Sony DVP-SR310P DVD Player region ... Mar. 13, 2017 Sony DVP-SR370 DVD-player region code - VideoHelp Forum Dec. 26, 2014 Region Code free for sony dvp-sr320 - VideoHelp Forum Feb. 14, 2014 More results from forum.videohelp.com

Sony Televison &... • Answered on Feb 06, 2021


need user manual for sony kvg21q2s

Sony Televison &... • Answered on Feb 01, 2021

Not finding what you are looking for?
Sony Grand WEGA KDF-60XBR950 60" Rear Projection HDTV Logo

166 questions posted

Ask a Question

Usually answered in minutes!

Top Sony Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76584 Answers

Nasir Muhammad
Nasir Muhammad

Level 2 Expert

230 Answers

Demonic-2011
Demonic-2011

Level 3 Expert

513 Answers

Are you a Sony Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Sony Televison & Video

  • Sony Televison & Video

Most Popular Question

problem theris no power supply try

  • Televison & Video
Loading...