20 Most Recent
Sony Grand WEGA KDF-60WF655 60" Rear Projection HDTV - Page 5 Questions & Answers
My 60 inch sony hdtv has a yelow circle in the
THAT COULD JUST BE A DUST SPOT INTERNAL TO THE OPTICAL ENGINE. THE LAMP CAN ONLY AFFECT BRIGHTNESS NOT ANYTHING TO DO WITH COLOR DISTORTIONS. IF IT NEEDS CLEANING I SUGGEST CALLING A SERVICEMAN
I have ablue tint
Hi.
I will anticipate that I do not bring good news.
The blue tint could be the result of a detached mirror in the light tunnel, but the blue small dots in the center of the screen usually mean that there is a defective light engine. In that case the whole light engine must be replaced, and the part is quite expensive, often over $800.
Call Sony and check if they can offer a good price on repair. The light engine can be
ordered calling this seller (part is not in stock).
Regards.
Ginko.
I have 60" wega tv
Hi,
This is indication of lamp is reaching to end of its working life and need to be replaced to solve this issue in tv.
Lamp replacement procedure would be written in user manual of tv and it is very easy, well explained.
Please buy Sony original lamp from nearest Sony store for good picture in tv.
Let me know if you have additional question.
Thanks.
My sony kdf-60wf655 keeps shutting
If tv turns back on itself after shut down then it is weak lamp problem, replace lamp in tv to fix its problem.
Buy Sony original lamp for good picture in tv and replace it as it is user level repair and lamp replacement procedure is mentioned in related user manual.
If standby light start blinking after shut down, let me know how many times it blinks after three second pause to provide you info about possible cause of problem.
Thanks.
Two bright blue half circles on bottom of
YOU HAVE EITHER A DEFECTIVE OPTICAL ENGINE ASSEMBLY OR THE OPTICAL ENGINE IS JUST DIRTY INTERNALLY. IF YOU CAN TURN THE TV OFF AND STILL SEE THE BLUE SPOTS AFTER THE VIDEO GOES AWAY THEN IT WILL BE DEFECTIVE OPTICAL ENGINE IF NOT THEN IT IS MOST LIKELY DIRTY OPTICAL ENGINE.
Dark picture
I would try replacing the lamp if everything else is ok with the set. The part number is XL2200. If you are not able to find one local to you call Sony customer service at 1800-222-SONY.
I hope this helps,
Skyassoc
The color is distorted, the picture is "bowed" and
It sound like your convergence has gone out on your TV. In most cases there are two convergence IC's that need to be replaced and a few resistors and fuses that need to be checked. If you are handy with a soldering gun you can do this yourself. You will need to buy a convergence kit or by the parts separately.
We purchased a sony wega hd lcd projection tv.
It sounds to me like you got a fingerprint on the lamp when you installed it. The oils in your skin can cause all kinds of problems on a lamp that gets soo hot. I recommend replacing the lamp again and using a tissue or sterile glove to hadle the new bulb. Also, before replacing the lamp make sure to clean and vacuum out the light engine box and fan.
If the problem persists, then the LCD panels inside the light engine have been heat damaged. There is a class action lawsuit in New York that is trying to extend the light engine warrantee on Wega TVs. You should give Sony a call at 1-800-222-SONY for information and more assistance.
good luck!
I have a Sony wega
First make sure the lamp is good, if its been at least 3yr since replacing the lamp or if its never been replaced now is the time to do so.
Our Sony Wega 55inch.has a
this is the result of a failing optic block and its a shame because i think these sets have a beautiful picture for their technology and era but this was a problem had by every size of these wega console projectors i hate to be the bringer of bad news but a color engine (optic block) isnt a very cheap repair i have one of these failed sets home and i use it to game and that suits me fine google this issue and you will find more info on this issue to better your knowledge and next step in fixing your problem hope this helps you alot
My Sony KDF-42WE655 has no
hi,
You've got it right, it seems you need to replace the lamp. If the lamp is faulty the unit will not turn on. See the instructions manual for lamp replacement..
Not finding what you are looking for?