20 Most Recent Sony TC-WE305 Single Cassette Deck Questions & Answers

Sony Audio Players & Recorders | Uploaded on Sep 02, 2013

No sound is recorded (although existing recording

Sony TC-WE305... | Posted on May 15, 2013 | Be the first to answer

I have two sony tc-355

yes,
check the muting circuit.if cannot fing please mail me i will tell the whicharea.
send the diagram.
to [email protected]

Sony TC-WE305... | Answered on May 21, 2012

1 Answer

Unable to to dub from the radio, phono,or cd

As far as I know, you need to press Record button to record from external source. If you press Dub, it will start Dubbing from Tape-A to Tape-B. You might be need to press Record and later press Pause or Play to start recording.

Sony TC-WE305... | Answered on May 21, 2012

3 Answers

Speed of TC 355 Tape recorder is too slow. Rest of the deck fine

Hi...
AS someone who repairs items like these I would say -- Find another in good condition. It would be cheaper than a repair.

Sony TC-WE305... | Answered on Jan 26, 2011

1 Answer

Sony tape decks model tc-355

Follow the left channel lead to where it joins with the PCB. Use a pointed tool and prod connections if you get a buzz then that stage in the amp is working. I suspect you will find it leads to a IC that might cause the fault. If you find it buzzers on the right but not left, then it's gone. PS don't short pins. If you can get hold of a signal injector it will make things easy.
Be careful and good luck.

Sony TC-WE305... | Answered on Jan 22, 2009

1 Answer

Deck A won't turn

the problem is the clicking spring of the pinch roller,that pushing through the spindle,maybe is weak or is not there,try to find out inside the deck,if you cannot find it.Improvised a clicking spring by means of the string of the guitar number 00,is good of making spring.

Sony TC-WE305... | Answered on Jun 14, 2008

1 Answer

My Sony stereo system MHC-RV555DA is blinking Protect continuously and won't play. What's the cause and How can I overcome this problem

drawing too much power from the unit. Have you hooked up any extra speakers or subwoofers to it

Sony Audio... | Answered on Jan 03, 2021

1 Answer

Sony CMT - CP555 cd drawer will not open. All 5 are affected, no release hole.

This could be failure of the player mechanism, particularly synchronization of carousel operation.

Sony Audio... | Answered on Dec 24, 2020

0 Answers

Model MHC-GNZ88D Mini Hifi System. It turns on, but why is there no display?

Sony Audio... | Posted on Dec 24, 2020 | Be the first to answer

1 Answer

Removing a stuck disc from sony cdp-cx355

You will have to disassemble the player to get access to the disc before you can remove it.

Sony Audio... | Answered on Dec 24, 2020

1 Answer

To connect a blue-ray player SONY BDP-S1700 (Digital Coaxial OUT) to ONKYO TX8511 receiver (2RCA Audio), which cable should I use? Y-Cable 1 RCA(Digital Out) to 2RCA (Audio)?

The digital RCA audio cable is not the same as the analog RCA audio cable. You need a digital audio (input) to analog audio (output) converter. Amazon has a number of models: https://www.amazon.com/DA-Converters/b?ie=UTF8&node=3224445011 . Many models do not come with audio cables. Thus you'll need to supply the digital coaxial audio cable (see https://www.amazon.com/AmazonBasics-Digital-Audio-Compatible-Coaxial/dp/B01D5H8TS4/ref=pd_bxgy_2/134-6585034-3648633?_encoding=UTF8&pd_rd_i=B01D5H8TS4&pd_rd_r=e311c756-6e80-4fd0-8026-16a144c6b41d&pd_rd_w=r0LwZ&pd_rd_wg=4jYy9&pf_rd_p=f325d01c-4658-4593-be83-3e12ca663f0e&pf_rd_r=YVE00Y31KS8TJ3YENVFN&psc=1&refRID=YVE00Y31KS8TJ3YENVFN for one version) and the RCA analog audio cable.

I hope this helps. If your TV has analog audio outputs (2 RCA or headphone jack), you may be able to avoid the converter. Connect the HDMI cable from the BDP-S1700 to the TV, then connect your TV audio out to the Onkyo TX8511. Use either an RCA analog audio cable or a Y-cable (3.5 mm to 2 analog RCA), Set the TV to external speakers if you need to. (Some headphone jacks automatically disable the TV speakers when in use.) You may need to adjust the video to audio sync with this method. Check your TV and Onkyo manuals.

Cindy Wells

Sony Audio... | Answered on Dec 20, 2020

1 Answer

I have a Sony TC-142 which would need a change of belts . Any dismantling instructions would be most appreciated, thank you

All information that you require is within the service manual.

Sony Audio... | Answered on Dec 16, 2020

1 Answer

Need longer System Control Cables for Sony Integrated Stereo Amplifier TA-AV431. Can these be made ? One goes to Cassette Deck TC-W431 and the other to Compact Disc Player CDP-C231

2.5 feet long enough? They are kept short to reduce data loss.

https://www.ebay.com/itm/Sony-TA-AV531-Amp-ST-JX431-TA-AV421-ST-JX421-System-Control-Cable-2-5ft-/192493215347

..

Sony Audio... | Answered on Dec 07, 2020

1 Answer

Hello, I have a Sony dav-s888 and I have a problem after inserting DVD (not for cd), The player is turning, several times, trying to find the boot but it's noisy (ugly cracks) and finally nothing's happening. I have to eject... Any Idea will be welcome. Thanks in advance

The player mechanism is defective.

Sony Audio... | Answered on Nov 24, 2020

1 Answer

Model MHC vx33. Why is it in protect mode?

It is in protect mode because of component level failure or cold solder connections.

Sony Audio... | Answered on Nov 15, 2020

1 Answer

Sony operating guide MHC-881 mini hifi component system manual for basic operating of this system

Request the operaitng guide for model MHC-881 directly from Sony.

Sony Audio... | Answered on Oct 29, 2020

2 Answers

Some DVDs will play, others wont

You could try checking the DVD discs in a region free player program to see if the DVD is playable. You could try Leawo Blu-ray Player which can play Blu-ray and DVD discs from any region. If the DVD discs can't be played on this player, then it's highly possible that the DVD disc is unplayable.

Sony Audio... | Answered on Oct 29, 2020

1 Answer

I have a Sony 1-542-296 microphone from a camcorder and I would like to make it work. what is the connector wiring and phantom voltage range?

This is an electret condenser microphone which isn't a standalone self-energising device and needs a small amount of power and a couple of other components to produce a working device.

It is possible the Sony microphone might have some, all or none of those built into the package and this will have to be investigated.

The power requirement is typically 2 - 3 volts.

http://www.learningaboutelectronics.com/Articles/Electret-microphone-circuit.php

Sony Audio... | Answered on Oct 14, 2020