Sylvania 6719DC 19 in. TV/VCR/DVD Combo - Answered Questions & Fixed issues
Codes for criag dvd player
287,281,284,286,222,000 are the codes to check. If you wish to get more details, check this site. Pull up older posts there. Setup code list and setup proceedings to
many popular brand remote controls are given. Two digit, three digit, four
digit and five digit setup code list to different models remote controls are
given. If you search the site in
Timeslide option, which can be selected from the drop down list at the top left
of the display window, it will be easy to locate the related post. You can also do a search by type in the
brand name and model number to your device into its search box at the top right
of display window.
on Apr 29, 2013
What is sap
SAP is an alternate audio program usually seen in markets with different languages. The most common is for a Spanish broadcast of an English program. It is also used to provide audio descriptions of programming for the blind. There should be a menu option under Audio to turn this on and off.
on Oct 13, 2012
How to eject dvd
Someone needs to look inside to see if something got inside and is stopping the mechanism from working---I have even seen a few which someone had managed to get 2 discs in at same time.
If the mechanism is damaged it may not be worth repair as the DVD portion (if even available) costs too much.
on Apr 01, 2012
Sylvania tv/vcr/dvd keeps going from channel 3 to AUX
Hi my name is Mike Houston of DISH Network, with the TVswitching between channel 3 and AUX there are some things to check to resolvethe issue. You will want to make sure all connections are hand tight from thereceiver to the TV and to the wall. After all connections are hand tight checkto see if the channels are still going back and fourth. If it still persiststry changing the remote address, I will send a link that better explains thissetup; http://www.dishnetwork.com/SupportSection/remote-setup
on Nov 29, 2011
How do you run channel
To auto preset channels do the following procedure.
1. Press the SETUP
button on the remote.
2. Using UP/DOWN
arrow Select CHANNEL SET UP
and press the RIGHT
arrow to enter to channel preset
3. Using UP/DOWN
arrow select AUTO PRESET
and press the RIGHT
arrow to start the auto scan.
Wait till The tuner scans and memorizes all the active channels in your area.
on Sep 10, 2011
My VCR won't play movies
sounds you have a jam a tape or forrien object in it use a flasslight to look through the door to see if there is any then you have to take it appart to remove it but i suggest taking it to a repair man...
on Apr 14, 2011
We bought a universal remote to increase our
S.A.P. Means Secondary Audio Program.
SAP, Mono, Stereo, Etc. You should be able to switch this from your remote. Even universal remotes should have this button to adjust sounds. Otherwise you need to go into the TV menu (not the remote) and change it from there. The only way you can change it on those channels is to switch manually. Happens a lot on these older TVs. No worries. Very common.
On many sets, the audio channel can be switched by remote control or through a SAP switch located around the tuning panel or "on screen programming." Usually, there is a setting labeled SAP, AUDIO SELECT, B-AUDIO, MTS, or MENU. By changing the setting, you should be able to select SAP. Not all TV sets are alike, so you might want to check your instruction manual for all the details.
on Mar 10, 2011
Sylvania 6720FDF A TV will not turn on.
The issue you describe is consistent with a power supply board issue. This is the board where the AC goes to.
I do not think it needs replacement, rather some defective capacitors are causing this issue.
unit up and take a look at the power supply board.You will probably see
one or more electrolytic filter capacitors that are bulged up in the
top-not perfectly flat like the others.
The value of these
capacitors will be different, most likely they will be somewhere
around-820 to 2200uF/25 V( or /10V sometimes)
can replace them with same values but I would recommend the voltage
rating to be higher(like 35V for an original 25V) for reliability
What happens is,these bulged top capacitors will cause a
low and unfiltered DC voltage=main board will malfunction(the relay
will keep clicking until the caps are holding enough charge to bring the
voltage up over a threshold point).
You can buy these capacitors
at any Fry's or Radioshack store or you can order them online at vendors
like "mcmelectronics.com"(look for electrolytic capacitors).
After replacing these capacitor(capacitors) most likely the normal operation will be restored.
may be also some other causes for this symptom ,like a defective T con
board ,or main board,but the bulged top capacitors are the most common
cause for this issue.
If you don't know about TV repairers, take
the TV to the nearest repairman to fix the fault for you. Also, note
that TV stores a lot of current, so wait a while before opening the TV
I hope this helps.
on Dec 04, 2010
Our Sylvania tv/dvd/vcr combo remote is not
If the remote is new and OK, then my opinion is the Ir Receiver on the front panel of your TV set is burned, replace it with new ones will solve the problem.
To locate it, follow the Ir receiver that written on the front panel of your TV, behind it is the Ir Receiver .
on Oct 23, 2009
Not finding what you are looking for?