Top 20 Fuji FinePix A120 Digital Camera Questions & Answers


Hi there i am sure its a problem with the camera CCD. but you can try a basic steps for resolve the problem.I inform you that if the solution not work then you need to replace the CCD.
Hi there please follow the steps and let me know the result.
1. Ensure batteries are fully charged & clean the battery connector point in side the battery compartment.
2. Look carefully between the lens and the camera body for any sand, dirt or any damaged etc.
3. Try turning the camera with the lens facing down and shake to dislodge anything stuck
4. Try removing batteries and memory card, wait 5 minutes and refit the battery only.
5. Now turn on camera( with out card ) and see ,if working then fix the memory card & again turn on the camera. If working then fine . Otherwise format the memory card and fix back in camera again & try. Make sure before format the memory card take a back up all photos in your computer then format. If no luck then reset or restore the camera setting by pressing Menu key for 2 sec .. in not done the press both Menu & self time key for 2 - 4 sec.
i hope it will gives you success. Thanks & Before you leave, if you have found my information helpful and if you haven't already done so then please press the ACCEPT button, this is how I am paid for helping you today. POSITIVE feedback & bonus is appreciated

Fuji FinePix... • 63 views • 0 helpful votes


If your camera is truly the Finepix A120, it uses xd picture cards, not SDHC cards.

Fuji FinePix... • 40 views • 0 helpful votes


Hi, the first thing to try would be to get another memory card for the camera as it could just be that the card is no longer working, failing that the problem will be with the firmware on the camera and this will need taking it to get sorted, try the memory card first and see what happens.

let me know if you need further assistance ok

plz rate this solution as i have a whole page of unrated posts, thanks

Fuji FinePix... • 74 views • 1 helpful votes


If your camera has a serial number starting with 4Bxx og 4Cxx, you may need to update the firmware.
Firmware is available her: http://www.fujifilm.com/support/digital_cameras/software/#firmware

Fuji FinePix... • 142 views • 0 helpful votes


you must go to menu and select format card, this should resolve the issue.


Fuji FinePix... • 102 views • 0 helpful votes


Either the camera is having a battery problem, or a lens issue:
Here are a couple sites that explain what you can do to try to correct this:
http://camerarepair.blogspot.com/2007/11/simple-fix-for-dead-cameras-that-wont.html
and:
http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html
Even though the article is entitled "lens error", it also applies to stuck lens issues.
Good luck, hope this helps, and thanks for using FixYa.

Fuji FinePix... • 36 views • 0 helpful votes


What happens when you try to format the card in the camera?

Fuji FinePix... • 202 views • 0 helpful votes


If your camera has a serialnumber starting with 4B or 4C, you need to update the firmware to the latest version. Firmware can be downloaded here:
http://www.fujifilm.com/products/digital/download/a120/fupd.html
Or, if your card just needs to be formatted:
Press Menu/OK, select Set, select Setup, select Format, press OK.

Fuji FinePix... • 67 views • 0 helpful votes


You don't need any special software. The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries. Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or, despite what I said first, you can use any photo management program such as Picasa. Organize edit and share your photos

Fuji FinePix... • 34 views • 0 helpful votes


you could try doing it manually, go to my computer open your camera, and select your pic files and ctr+c and ctr+v on folder where you want them to be or just drag them to my pictures folder or wherever you want

Fuji FinePix... • 151 views • 0 helpful votes


change the image size

Fuji FinePix... • 31 views • 1 helpful votes


try resetting the camera!

Fuji FinePix... • 77 views • 0 helpful votes


Try this site for a firmware update. You need to get a AC power adapter for it to work though. It is from Fuji and it worked fine for my A120. The older XD cards are of a different format then the newer ones so if your new XD card has an 'M' on it you will need to do the firmware solution.
Good luck
http://www.fujifilm.ca/x3719.xml

Fuji FinePix... • 286 views • 0 helpful votes


You will need to do a firmware update to be able to use your new 'M' XD card. Also you will need a AC adapter to be able to use the update for your camera.
It is a Fuji site and it works.
Good luck.
http://www.fujifilm.ca/x3719.xml

Fuji FinePix... • 234 views • 0 helpful votes


You will need to do a firmware update to be able to use your new 'M' XD card. Also you will need a AC adapter to be able to use the update for your camera.
It is a Fuji site and it works.
Good luck.
http://www.fujifilm.ca/x3719.xml

Fuji FinePix... • 115 views • 0 helpful votes


if you have XP or Vista, just go to "My Computer" and you will see your card as another removable memory/media, double click on it and you'll see the folders for your card.

good luck

Fuji FinePix... • 54 views • 0 helpful votes


Try using the Fuji site for downloading the drivers for your computer. If you are trying to upgrade your XD card to an M type you will have to also down load the FIRMWARE for it as well.
http://www.fujifilm.ca/x3719.xml
On the left side of the screen are selections for the drivers and firmware updates.
Have fun and good luck.

Fuji FinePix... • 64 views • 1 helpful votes


A good photo shop type program will let you turn colour into black and white pictures easily. Paint shop pro has been a standard and favorite of mine since it came out. Lots of editing functions and lots of interesting extras to play with.
I believe the latest version is PSP12
good luck and happy editing

Fuji FinePix... • 64 views • 0 helpful votes


are you using rechargable batterys or weak batterys. my fuji won't work unless I use a e^2 titanium batterys. they have lots of jam (3500's?). anyways when the picture or ccd goes to charge there isn't enough juice to fire and the cammera dies. or maybe there is junk on the connections and won't let enough volts through. rechargeables are bad becouse they don't have the volt output needed - 1.2v charged I beleive. the other batterys are expensive but they've been in my cammera for three months, or about 300 pictures.
hope that helps :)

Fuji FinePix... • 105 views • 0 helpful votes

Not finding what you are looking for?
Fuji FinePix A120 Digital Camera Logo

33 questions posted

Ask a Question

Usually answered in minutes!

Top Fuji Cameras Experts

Steven Wander
Steven Wander

Level 3 Expert

595 Answers

Brad Brown

Level 3 Expert

18666 Answers

Rob Hill
Rob Hill

Level 3 Expert

1426 Answers

Are you a Fuji Camera Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

FinePix Fuji

  • FinePix Fuji

Most Popular Question

need fix camera ahve digital

  • Cameras
Loading...