20 Most Recent Wharfedale Diamond 8.3 Main / Stereo Speaker - Page 9 Questions & Answers


Best option is to replace like with like if a genuine replacement can be sourced, perhaps from the manufacturer.

There are lots of audio suppliers and constructor stores so it shouldn't be difficult to find a suitable replacement of the right dimensions and power handling capability.

One option it might be worth exploring is a piezo tweeter. They should have really become popular as they are light and provide good reproduction and don't need a crossover.

Depends whether you want volume or quality - the horn tweeter remains the best option for quality due to the better sound dispersion and the fact the horn design means the tweeter is operating in it's own isolated space and is mostly unaffected by the pressure waves from the other drive units. If building a speaker box from scratch I would always place the tweeter in a small completely separate air tight compartment...

Audio Players &... | Answered on Sep 13, 2020


Some of these players have a reset hole. A reset can be done by poking the reset hole with a pointed object. Hold it until the screen goes off and on again. If it doesn't have a reset hole, you can reset it by holding the power button until the screen goes off and on again. I hope it will solve your problem.

Audio Players &... | Answered on Sep 11, 2020

Tip

How to convert MOD to AVI MPEG WMV MP4 VOB 3GP?


This is an article about what is MOD format, how to convert MOD files to AVI MPEG WMV MP4 VOB 3GP.

What is MOD?

The .MOD format is simply a MPEG-2 video file, often used by various digital camcorder models to save their videos. And you may get your MOD files from the following camcorder models:

JVC: GZ-MG30, GZ-MG70, GZ-MG37, GZ-MG77, GZ-MG505, GZ-MG130, GZ-MG155, GZ-MG255, GZ-MG555

Panasonic: SDR-S100, SDR-S150, SDR-S10, SDR-H18, SDR-H200, SDR-H40, SDR-H60, SDR-SW20

Canon: FS100, FS10, FS11

Why convert MOD files to AVI MPEG WMV MP4 VOB 3GP?
Since MOD files are not widely accepted, if you want to play MOD files on windows media player, windows movie maker, iPod/iPhone, Blackberry, PSP, Zune, Creative Zen or others multimedia players, you may need to convert MOD video files to other popular formats like AVI MPEG WMV MP4 VOB 3GP. Then you can share your MOD videos with your friends with any player and family by uploading them to YouTube, Facebook or Myspace.

Therefore, you may need a Video Convert to help you convert MOD files to AVI MPEG WMV MP4 VOB 3GPB. Free download Aimersoft Video Converter here.

http://download.aimersoft.com/aimer-video-converter_full68.exe

How to convert MOD to AVI WMV MPEG MP4 VOB with Best Video Converter ?

Step 1. Import MOD files to Aimersoft video converter

Copy the MOD file from your video camera to your hard drive, click “Add” to browse your computer hard drive, and upload the MOD files you want to convert. And the best Video Converter automatically scans and displays the MOD file you have chosen.


Step 2. Select output settings
Select the proper output destination folder and your desired output format.
If you want to convert MOD files to other video format for portable device, but you don’t know which formats your device supports, you can simply select any format in the category of your device.

Edit the video files
If you want to edit your MOD video files, this MOD video Converter offers you powerful video editing functions.

Trim – you can easily trim your MOD video into multiple segments by moving the sliders or just typing the number in manually.

[img]http://www.aimersoft.com/images/tutorial/video-mod-to-wmv-trim.jpg[/img]
Crop – You can crop the black bar and get what you want by setting the video zoom to full screen, 16:9, 3:4 or others.
[img]http://www.aimersoft.com/images/tutorial/video-converter-crop.jpg[/img]
Add effect – Configure the brightness, contrast, saturation, and add special effects like Gray, Emboss, Negative, Old Film to personalize your MOD video.
[img]http://www.aimersoft.com/images/tutorial/avchd-to-wmv-effect.jpg[/img]
Add watermark – If you want to add some image or text watermark to decorate your video, you can click “Watermark”. It also allows you to configure the parameters such as transparency, vertical space, and horizontal space.

Step 3. Start to convert MOD files to AVI MPEG WMV MP4 VOB 3GP
Simply click “Start”, you can start your conversion from MOD to AVI WMV MPEG MP4 VOB.

After you convert MOD to AVI MPEG WMV MP4 VOB 3GP, you can easily import your MOD files to Windows Movie Maker, iPod, iPhone, Zune or others multimedia players with this Aimersoft Best Video Converter.

on Sep 07, 2020 | Audio Players & Recorders


setting the time zone on a "auriol radio controlled clock" is as follows: 1: press the Down button for 3 seconds and an F will appear in upper right area:
2: press the Set button for 3 seconds and the Hour display should now be flashing:
3: adjust the time to your zone:
4: press Set to complete

Audio Players &... | Answered on Sep 03, 2020


This is normal, a spark from the compressor commutator opening when the compressor shuts off, causes a magnetic and radio wave and this wave can travel some distance and be picked up by other things. If you are able to move the wires farther away, that is the simple method to correct this. If not then you are looking at other methods of shielding the speakers and wires from picking it up

Audio Players &... | Answered on Aug 29, 2020


doyou have a youtube account ?
video
http://www.mahalo.com/how-to-create-a-youtube-account


Open Windows Live Movie Maker or the video editing software of your choosing.

Add a picture to your film reel by clicking the "Add Photos and Video" option.


Browse for a picture on your computer that is relevant to the song you are uploading.

For instance, if uploading one of your band's songs, it would be a good idea to use a photo of your band performing.


Click on the "Add Music" tab on the task bar.

Browse for the song that you intend to upload and import it. Select the "Fit to Music" option to ensure that your video will run for the duration of the audio file that you chose.


Choose the bitrate that you feel is needed for the file, and export the video as a .wmv (Windows Media Video) file using your program's built-in encoder.


Keep in mind that the higher the quality of a file is, the longer it will take to upload to YouTube's servers.


Open your web browser and navigate to YouTube. From the home page, click on the "Upload Video" link. In the pop-up window, browse to the video that you have just created and upload it.

The uploading process will begin automatically.


Tag your songs by entering keywords in the blank field that appears after your upload completes.

Choose words that pertain to the song, such as the name of the artist and the title of the song. T

his will make it easier for others to find your music.

Share your music with your friends and family by clicking the "Share" button underneath your video.


You will be given a URL link to your video, which you can copy and paste into emails or Facebook profiles.


hope this helps

Audio Players &... | Answered on Aug 28, 2020


First check all of the ground connections both at the amp and bass. If the amp makes the buzzing with no input at all, the problem is most likely a bad cap in the front end of the amp. These are not the easiest to work on. I would suggest that you bring the amp to a servicer for repair. Anything that you can describe that indicates when the buzzing is more evident would be helpful in tracking down the problem.
Dan

Audio Players &... | Answered on Aug 27, 2020


Your Aiwa speakers are passive units and need considerable power to drive them to a reasonable volume level, comparative to the output of a PC.

The sound card of a PC produces a reasonable quality output but in the terms of power is a very modest output which is why the usual speakers used with a PC are active types - i.e. have a self contained power amplifier, usually driven by a remote power supply.
This type of active speaker is designed to connect via the headphone/speaker socket and still produce a good quality sound. This is possible as the speaker's internal amplifier is built with a particularly low impedance input that matches the low output impedance of the PC headphone output that would be unsuited to be connected to the average hifi amplifier.

Many PC sound cards have a Line Out socket that would be suitable for connection to many hifi amplifiers.

Audio Players &... | Answered on Aug 26, 2020


You may need to make sure the speed control arm that goes from the speed control adjustment screw to the spinning disk on the governor is adjusted and lubricated properly. These items are best adjusted with the motor board out of the machine.

Be careful, if you make the turntable spin too fast the weights on the governor will strike the motor frame and break the governor springs.

Audio Players &... | Answered on Aug 22, 2020


hi Michael,

no try to unplug all the connections and re plug .if doent help.you have to go for electronic repair.main problem is with power amplifier section.or power supply unit

regards,
nuwan

Audio Players &... | Answered on Aug 21, 2020


You have to sync it to the player. This is often done in some software. For example iTunes has the ability to do it, you don't need to buy music from iTunes to add music to the player. It can come from your own collection. To do it with iTunes you do have to download a version of the software from them, but it's free. Next you select the files you want to sync and then run the sync. You cannot disconnect the player when you do this. But when it's complete copies of the files will be on your player. You then disconnect safely the player, then you can listen to the music.

Audio Players &... | Answered on Aug 18, 2020


Is this one of the units that has a ribbon cable ( looks alot like an IDE hard drive cable) that connects all the components together? It also has a squre plastic fan that protrudes slightly from the rear (by about a 16th of an inch)? If so, it's the power module which consists of 2 boards (along the fan housing). You can probably find replacements for about $70, but I wouldn't bother. They quit making new replacements several years ago and any board you get now is just a pull from old stck units.... and they fail about 2 minutes after you put them in. Pioneer knows this but still sells the defective parts.

Audio Players &... | Answered on Aug 13, 2020


you need to get into the box, and sort all 100 of the cd's out yes all of them..
to this i mean make sure they are in there tray's properly,second make sure the tray's are not "racked",ie that they have not slid out of there small holder's..
now once u have the mean's open the juke box..
find the black switch, pull it out to engage service mode<,
now u go to work on the cd's, then you will hit "h" 0-0 "h"
this should clear your error 73 code ,as long as all the cd's are in there proper place's
press switch back in, you are then back to normal play
at the point of closing the door you might need to power cycle the juke box

Audio Players &... | Answered on Aug 11, 2020


Connect the AUDIO OUT ports on your DVD player to the audio in ports on your TV with the regular or standard audio cables (red and white jacks). Connect the AUDIO OUT ports on your TV to your speakers using a standard audio cable, or a digital audio Optical cable.

Audio Players &... | Answered on Aug 09, 2020


200 watts is the output, home use or commercial? not a good amp to run at its max as it has a low reserve headroom. for home use 100 watts rms is more than enough.

Audio Players &... | Answered on Aug 09, 2020


This is a very common issue. Unplug the mini power jack the thing with the cord. Look inside the chargers hole on the jam box and then take a knife to gently bend the tab back towards the middle or even lower. Be careful when you are re plugging into the power into the socket. The socket tab and the mini plug must meet .

Audio Players &... | Answered on Aug 03, 2020


The AUX connection is what the Line In connection used to be called and generally has a medium impedance and a sensitivity of upwards of 800 mv, often 1 to 1.5 volts, being the typical output of a tuner or tape deck.
Details of this is usually found in the user manual - good matching is repaid in better quality sound and reduced interference.

Audio Players &... | Answered on Aug 02, 2020


The DVD and *and* the DVD player both have a region code embedded in each. A map of the regions used appears below:

steve_con_2.gif

Regions 0, 7, 8 & 9 do not appear as they represent "No Region Coding" "Unused" "Cruise Lines" and "Region Free" respectively.

A DVD player will only play a matching region code DVD, or the player OR DVD have one (or more) 0, 7, 8, or 9 region codes imbedded. You'll not be able to change the DVD code, but you *might* be able to change the region code of your player. Computer DVD players can sometimes be flashed to a new region more readily than the entertainment system DVD players, but it relies solely on the manufacturer and model of the player. Some require file be downloaded and run, while others require a DVD or CD be created and played with a specific file saved on it. Here's a link to results that discuss how to change the region code for DVD players. You'll need to know at the very least the manufacturer and model number of you player to begin.

I hope this helps and good luck! If you found this helpful, please rate my reply 4 "thumbs up". Thanks!

Audio Players &... | Answered on Jul 30, 2020

Not finding what you are looking for?
Wharfedale Diamond 8.3 Main / Stereo Speaker Logo

13 questions posted

Ask a Question

Usually answered in minutes!

Top Wharfedale Audio Players & Recorders Experts

The Knight
The Knight

Level 3 Expert

76466 Answers

 Grubhead
Grubhead

Level 3 Expert

5700 Answers

Marvin
Marvin

Level 3 Expert

85239 Answers

Are you a Wharfedale Audio Player and Recorder Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Wharfedale Audio Players & Recorders

  • Wharfedale Audio Players & Recorders

Most Popular Question

need find out active or passive

  • Audio Players & Recorders
Loading...