20 Most Recent Fuji FinePix A310 Digital Camera - Page 9 Questions & Answers

Hi Iman, Try www.manualowl.com Lots of info there. I hope this helps.Jimmy

http://www.fujifilm.com/support/digital_cameras/software/You can find all software at the above link.

Have you ever heard of GOOGLE?Please find manual at bellow link.http://www.fujifilm.eu/uploads/tx_fujifilmproducts/downloads/finepix_jx400jx300series_manual_02.pdf

The lens housing is jammed, often caused by dirt or other dust particles. Sometimes the gears will ware out through constant use. Since the cost to repair would be high. There is a risk situation you can try, "at your own risk" take the palm of your hand and sharply hit around the outer housing of the lens and pressing power as you do so in an attempt to free up the mechanism if luck is with you the lens will move.

This would most likely be caused by spyware. The easiest way to fix it is to re-install Windows. If you do not want to re-install, or you have data that you cannot afford to loose you can use a spyware scanner to find it and remove it. Spybot and ad-aware always seemed to work for me in the past.

What camera is it? Some of the older ones just do that. I had one where I just took out the batteries when I wasn't using it and then had to reset the date every time. What a pain but it saved the batteries till I bought a new one.

There is usually a reset procedure for cameras. Here is some information that might help you out. Please post back it this helps : )http://camerarepair.blogspot.com/2007/12/fixing-lens-error-on-digital-camera.html

The answer is still the same

The "W" indicates that it is a recoverable error. The "24" indicates that there is a problem in the paper feeder. The "25" indicates that it is a laser printer problem. Looks to me as though you have a paper jam.

If the command dial on your Fuji Finepix S9800 camera is overly sensitive, making it difficult to select items on the menu or adjust settings, there are a few steps you can try to address the issue:

1. Clean the dial: Sometimes, dirt or debris can accumulate around the command dial, affecting its sensitivity. Use a soft, lint-free cloth or a small brush to gently clean the area around the dial, removing any particles that may be causing the sensitivity issue.
2. Adjust the sensitivity settings: Check the camera's menu or settings to see if there are any options to adjust the sensitivity of the command dial. Look for settings related to "dial sensitivity" or "control dial response" and experiment with different levels to find the one that suits your preferences.
3. Reset the camera settings: If the sensitivity issue persists, you can try resetting the camera settings to their default values. Look for the "Reset" or "Factory Reset" option in the camera's menu and choose the appropriate setting. This will restore the original settings and may help resolve any software-related issues.
4. Contact customer support: If none of the above steps resolve the sensitivity problem with the command dial, it may be worth contacting Fuji customer support for further assistance. They can provide specific troubleshooting steps or advise you on whether the camera needs to be inspected or repaired by a professional technician.

It's important to handle the camera with care while attempting any adjustments or cleaning. If you are unsure or uncomfortable with the process, it's recommended to seek professional help or take the camera to an authorized service center to avoid any potential damage.

Hi, Please look on the front cover of the camera's box or it's manual for a number followed by MB or GB and that number should be the answer to your question. And please double check (in the manual) that the camera does have a memory separate from any default sd card that comes with the camera. Thank you.

id send it in. they will repair or replace it with a refurb for cheap money

hi i need help with my focus errar

Sounds interesting - what does it mean ?

Follow the "instructions" in the "manual"

Check batteries and the terminals that connect to your batteries. Often the contacts get corroded because batteries have acid in them.