20 Most Recent Fuji FinePix S7000 Digital Camera - Page 2 Questions & Answers

Without the right skills and tools it is almost impossible to correct assemble a lens. I'm not sure you can switch over a complete lens assembly, but I do advice to look at ifixit dot com, to see if they did unassembled the S7000 already, Then you can make up yuur mind if you have enough skills (and tools) to do it yourself. If you don't see anything on the pictures you make, about the scratch, you also cold continue using the camera as is. Most of the time you only see a flair on the picture is a bright light hits the scratch.

Steve, S700 and S7000 are different beasts.

S7000 is only rated for 1Gb compact flash cards. It apparently works with 2Gb ones but as I and a lot of others have discovered no matter how you tweak around sectors and clusters it won't read the thing.

This is a Fat16 limitation.

On the LCD screen? On the memory card? This question lacks information to help you.

See if there's a firmware download on the support section of the Fuji website.

Do a power reset on your camera. Switch on your cam. Now, without shutting it off, just open the battery compartment and take the batteries out.Check if there is a small pinhole in the compartment, which is usually a reset button. If it's there, insert a pin inside it and press a little, u will feel a button has been pressed. DO NOT PUSH Forcibly. Now, wait for about 1-2 mins. and then put the batteries in and turn on the camera. Try it. (P.S. Before doing this, Please check the batteries if they are charged or not, if not, charge them first.)

Sorry, but I think you are out of luck....your pictures are gone.

It sounds like your white-balance is off on the magenta side of things. This could be caused by a number of factors, though I would explore your camera's white balance setting to make sure it's set for the right lighting situation. If changing your white balance setting fails, it may be a more serious issue with your sensor or other camera hardware, requiring a professional to repair it.

We suggest running the Microsoft AutoPlay Repair Wizard utility which is available as a free download from the Microsoft Download Center. The AutoPlay Repair Wizard scans your computer devices to find defective AutoPlay settings, and attempts to fix those it finds. To download this utility, please go to the Microsoft Download Center and enter "AutoPlay" in the Keyword box.

Try NOT connecting your camera to your computer.The best way to download pictures from your camera to your computer involves removing the memory card from the camera and plugging it into a card reader (either built-in to the computer or connected via USB or FireWire). This is likely to be faster than connecting the camera to the computer, and won't run down your camera's batteries.Once the card is plugged in, it will appear to your computer as a removable drive. You can use the operating system's drag&drop facility to copy pictures from the card to the computer's hard drive, the same way you copy any other files. Or you can use any photo cataloging program such as Picasa ( http://picasa.google.com ).

zoom error

No. The S7000 works with xD Picture Cards, which theoretically go up to 8GB though no one appears to make xD cards larger than 2GB.

I also have same problem