20 Most Recent
Emerson CD-2581R CD Player - Page 5 Questions & Answers
Color code for factory wiring harness for 05 Hyundai Elantra
I found a wiring diagram for the 2005 Hyundai Elantra that might be helpful . According to the diagram, the color codes for the factory wiring harness are as follows:
Wire Color Function
Orange/Black 12V Constant
Yellow 12V Accessory
Black Ground
Blue/Black Power Antenna
Green/Orange Illumination
Brown/White Left Front Speaker (+)
Black/White Left Front Speaker (-)
Brown/Yellow Right Front Speaker (+)
Black/Yellow Right Front Speaker (-)
Brown/Red Left Rear Speaker (+)
Black/Red Left Rear Speaker (-)
Brown/White Right Rear Speaker (+)
Black/White Right Rear Speaker (-)
If you don't have a plug on your factory wiring harness, you can hardwire it by connecting each wire to its corresponding wire on your new stereo. You can use crimp caps or soldering to make the connections
. If you're not comfortable with hardwiring, you may want to consider purchasing an aftermarket wiring harness that clips onto the factory harness you removed off the rear of your factory radio during its removal. This will make it easier to connect your new stereo to your car's electrical system .
Hyundai Radio Wiring Color Codes - Radio Codes Calculator
Becker Grand Prix BE1432,
Not so. Becker radios are German products that are put into Mercedes (and other German imports). There are techs who advertise online and provide codes for a nominal fee. Worst case, you can contact BeckerUSA for a code for a bit higher-than-nominal fee.
Pontiac. Nice try.
Hello, I lost the code of my radio-Cd. I have a Suzuki Ignis 2005 and the Radio -Cd is a Blaupunkt. Could you please find the code for me?
No we can't find the code for you!
The code is based on the serial number of the specific unit. It is marked on a sticker on top or at the back of the unit.
There are two ways to get the code
1. Go to your local Suzuki dealership with the vehicle registration document and they will give you the code based on the VIN number, and through that the serial number.
Or
2. You find your serial number and pay and $18 fee to a company like this;
BLAUPUNKT RADIO CODES ' Online Blaupunkt Radio ...
www.radio-code.co.uk > blaupunkt-radio-codes
Blaupunkt car radios will normally contain a 14 digit serial number which can be found either printed on a label or engraved on the side of the unit. These serials are only visible once the Blaupunkt radio has been removed from the vehicle.
BLAUPUNKT CAR RADIO CODES - Online Service
www.ivgsoft.com > radiocode
BLAUPUNKT CAR RADIO CODES. BLAUPUNKT Car Radio Codes.
Get your free Blaupunkt radio code online 2020instant-radio-code.com > blaupunkt-radio-unlock-codeThe car radio code is indicated on many blaupunkt models on a small white sticker inside the glove box. The unlock code will be labeled "Anti-theft radio code".BLAUPUNKT RADIO CODE ' Retrieve your code onlineradiocodeford.com > blaupunkt-radio-codeUnlock your Blaupunkt radio Code online by entering the BP, C7 or GM serial number. Works for CAR 300, 520 and many other models.
I can't pit CD plate in player
Assuming your player is
Pioneer VSX-902 receiver's CD player, here are a few troubleshooting steps you can try:
- Verify the correct placement: Make sure you're aligning the CD properly with the CD tray. The label side of the CD should be facing up, and the CD should sit flat on the tray. Some CD players may have specific guides or markings to indicate the correct placement.
- Check for any obstructions: Inspect the CD tray and the surrounding area for any debris, dust, or foreign objects that might be obstructing the tray from fully opening or closing. Gently clean the tray and the CD player's surface using a soft, lint-free cloth.
- Press the eject button: Before attempting to insert a CD, press the eject button on the CD player to fully open the tray. If the tray doesn't open, there may be a mechanical issue with the CD player that requires professional attention.
- Power cycle the receiver: If the CD tray is stuck or unresponsive, try power cycling the receiver. Turn off the receiver, unplug it from the power source, wait for a few minutes, and then plug it back in and turn it on. This may reset the CD player and resolve any temporary issues.
- Contact Pioneer customer support: If you've tried the above steps and still can't insert a CD into the player, it's best to contact Pioneer customer support or consult a professional technician. They will be able to provide specific guidance for your model and help troubleshoot or repair any underlying issues with the CD player mechanism.
It's important to exercise caution when attempting any repairs or troubleshooting steps with electronic devices. If you're unsure or uncomfortable with performing these steps yourself, it's recommended to seek professional assistance to avoid any potential damage to the equipment.
Not finding what you are looking for?