20 Most Recent Emerson EWD2003 DVD Player/VCR Questions & Answers

0helpful
1answer

Emerson dvd player won't read disc. makes spinning noise but nothing happens. disc display sometimes show spinning. only get blank screen . used cleaner disc. work at first now cleaner won't

The DVD laser pickup is at the end of life, replacement of assembly the only option, cheaper to replace the combo unit.
6/24/2012 2:47:55 AM • Emerson EWD2003... • Answered on Jun 24, 2012
0helpful
1answer

Sensor on VCR does not seem to be working. Does anyone know where it is.

Visit this site for more details. Type in the site name Electro-help either to Google or Yahoo search box [not in the address bar of your browser], and click search. It is an electronic equipments service help site. All details you want are there. Note the position of hyphen in between words in site name, when you type it in. The site will appear as it is in web; subtitled as electronics equipments' repair help.Check the remote control for its infrared emission. Just visit this site. It has all details about how to check a remote control, and to repair it. Pull up older posts there.

5/16/2012 11:49:54 PM • Emerson EWD2003... • Answered on May 16, 2012
0helpful
1answer

I have an emerson dvd/combo

Hello
Insert a head cleaning disc into it and play it for atleast two times. The fault is with Laser Pickup Unit [ the reading head]. If the fault is due to dust or fungus on its focussing lens, the cleaning disc will wipe it off. If this does not help you, there is no other way than replacing the Laser Pickup Unit with same type and number fitted now. OK.
6/6/2011 3:40:08 AM • Emerson EWD2003... • Answered on Jun 06, 2011
0helpful
1answer

Dvd player will not open, it wants to hang up on

hi,
check the tray loading belt. u can only see the belt beneath the cd tray . if the bet become oversizes due to wear and tear this type of problem can occur. first check that. if it sees ok then there may be problem with any of the loading wheel. also try to lubricate the side of loading tray use silicon grease for the same.

ok
12/28/2010 2:41:18 AM • Emerson EWD2003... • Answered on Dec 28, 2010
0helpful
1answer

Comcast remte code needed

20591, 20675, 20821, 21268,10154, 10236, 10463, 10180, 10178, 10171, 10623, 11963 if you have a remtoe with a GREY ok/select button these are the codes for the dvd players and combo units i had to use a dvd code for my combo

if your remote has a RED ok/select button use these codes 20591, 20675, 20821, 21268,
10154, 10236, 10463, 10180, 10178, 10171, 10623, 11963
6/20/2009 6:30:40 PM • Emerson EWD2003... • Answered on Jun 20, 2009
0helpful
2answers

Dvd audio quieter than vcr audio

There may be an audio adjustment in the dvd player that wasenr set up at the factory correctly. depending on how old the unit is I would contact the manufacturer and see if its under the factory warranty as you DO NOT wanna go inside and start turning controls as this will or could throw the entire alighnment out of the dvd player. I(f theres no warrantee then you could ask them if theres an audio output adj and what the pot # was. Or else your gonna need to get a service manual and throw ya back a few bucks. But my guess is that if you bug the service guys enough they will tell you where the adjustment is. Good luck
3/23/2009 1:17:12 AM • Emerson EWD2003... • Answered on Mar 23, 2009
0helpful
5answers

No picture

Tvs usualy have a few ways to hook them up. One is a coax cable this is the silver one in the back that you screw in a cable. The second are RCA cables these are the ones that are yellow, red and white. Yellow is always the video and white and red are for audio. If your using the coax cable your tv needs to be on channel 3 or 4 you may have to force the tv to go to that channel by pushing 03 on the remote. If you are using the Rca cables then you need to change the tv to "video 1" or "video 2" this changes the tv from tunner mode to aux input mode. Most DVD players dont have a coax out so you have to use the rca plugs. Some tvs have the rca plugs on the front (video 2) and the back (video 1) or line in. Some tvs have line out also so you need to figure out wich way you have it hooked up. Do a search for the model of your tv and it should show a diagram on how to hook it up.
8/10/2008 4:23:56 PM • Emerson EWD2003... • Answered on Aug 10, 2008
0helpful
1answer

PHillips DVD728 - no picture

try here see if the codes are the same as you entered .
video help
enter your model in to the search bar .


riz.
6/18/2008 2:18:01 PM • Emerson EWD2003... • Answered on Jun 18, 2008
0helpful
1answer

Emerson EWD2003 DVD Player / VCR Combo has no power.

Check the breaker box for a tripped breaker.
4/9/2007 5:15:01 PM • Emerson EWD2003... • Answered on Apr 09, 2007
0helpful
2answers

I have an Emerson model#mw8111ss i punched numbers on the dialpad it wont do anything what to do

Punched numbers on the dialpad, not sure what you're talking about
9/26/2022 5:05:49 PM • Emerson... • Answered on Sep 26, 2022
0helpful
1answer

Replaced my motherboard on an Emerson TV and now my remote will not control it

Did you get the connector hooked up coming from the IR board to the TV?
9/21/2022 7:47:10 PM • Emerson... • Answered on Sep 21, 2022
0helpful
1answer

Change input on Emerson LC320EM1F TV WITHOUT REMOTE

Using the channel buttons use the down button to get to channel 2, if you keep pushing the down button it will take you to the HDMI, AV ect inputs
9/11/2022 12:32:29 PM • Emerson... • Answered on Sep 11, 2022
0helpful
1answer

I have a lc320em1f Emerson 32" tv and have a message, "resolution mismatch! Change devices resolution". How do I do that? And what HDMI do I hook my Xbox One S to, 1, 2 or 3?

How do I change my TV screen resolution?
  1. Press MENU on your set-top box remote control.
  2. Use the RIGHT ARROW button to select SETTINGS on the horizontal menu bar.
  3. Select SYSTEM OPTIONS, and then scroll to SELECT SCREEN ASPECT RATIO AND HIGH DEFINITION press the OK button.
  4. Select Screen aspect ratio and high definition, and then press OK.
https://www.windstream.com/support/kinetic-tv/How-do-I-change-my-TV-screen-resolution https://answers.yahoo.com/question/index?qid=20120823110938AAeXM5O
8/30/2022 1:03:32 PM • Emerson... • Answered on Aug 30, 2022
0helpful
1answer

Emerson Model # LF501EM5F shut down automatically after less than a minute

You have issues with the EEPROM, a new one can be ordered and soldered in but it takes advaced soldering skills...may be best to replace the board
8/27/2022 8:40:27 AM • Emerson... • Answered on Aug 27, 2022
0helpful
1answer

My tv shuts itself off!

Quite a long "description". "How can I fix it without having to check the back of the TV or going to a repairman?" (I altered the spelling etc a little there.)Answer: Go to the internet and search for "Magic TV Repair Wand" and let me know if you find one---
8/25/2022 9:32:06 PM • Emerson... • Answered on Aug 25, 2022
0helpful
2answers
0helpful
1answer

Emerson 32 in led HDMI flat screen tv, I need to know how to get the tv to stay on???

Could I get a little more information Jeannie......does it shut off like it's unplugged or shuts off and will turn back on ?
4/15/2022 11:54:14 PM • Emerson... • Answered on Apr 15, 2022
Not finding what you are looking for?
Emerson EWD2003 DVD Player/VCR Logo

14 questions posted

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76851 Answers

Cindy Wells

Level 3 Expert

6526 Answers

Jaime Hernandez

Level 3 Expert

2345 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Emerson Televison & Video

  • Emerson Televison & Video

Most Popular Question

emerson dvd combo

  • Televison & Video
Loading...