20 Most Recent Emerson EWC19T3 19 in. TV/VCR/DVD Combo Questions & Answers


There is no reset for the remote that I know of.

Emerson EWC19T3... • Answered on Jun 27, 2017


Try these codes: Emerson 011, 026, 027, 028, 029, 030, 031, 032, 037, 042, 053, 064, 065, 067, 075, 076, 079

This is from: <http://www.bobvila.com/Global/FAQ/Detail-93.html>
Hope this helps.

Emerson EWC19T3... • Answered on Dec 22, 2015


0101 0152 0195. Try these codes. If you wish to get more; check the site linked here. It has set-up code list & set-up procedure to many popular brand remote controls. See it in "Mosaic" or "Magazine" view. It will make surf easier. http://electrohelponline.blogspot.com/ Try this link too http://remotesearch.blogspot.com/

Emerson EWC19T3... • Answered on Apr 28, 2014


You really need that original remote--universal will not do it and it cannot be done manually.Good luck as Emerson can be difficult as far as getting anything.

Emerson EWC19T3... • Answered on Apr 23, 2012


Hi carri160, First of all, thank you for posting your question here at Fixya.Emerson EWC19T3 original remote control is no longer available. The only available now is the substitute remote control that provide similar functionality to the original one. Please click here to open the link in a new tab.Hope I helped you!Have a great day!Good luck and take care!mjsazon

Emerson EWC19T3... • Answered on Jan 28, 2012


Hello

Three digit universal remote code for emerson are:-

004/ 009/ 014/ 023/ 024/ 025/ 026/ 027/ 030/ 032/ 033/ 034/ 035/ 036/ 037/ 038/ 039/ 040/ 041/ 042/ 043/ 045/ 046/ 049/ 053/ 116/ 135/ 147/ 177/ 179

Four digit universal remote code for Emerson TV/vcr combo are:-

0456 [0458 0227] Where the code is listed as [### ###] the first is for the DVD and the second is for the VCR. Otherwise just the one code operates both the DVD and the VCR Direct Code Entry
  1. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  2. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks, then stays lit.
  3. Enter the 4 digit code from the code tables. Note: after a valid code entry, the red indicator turns off. For an invalid code, the red indicator flashes.
  4. With your device on, press CHANNEL UP. If the device responds, no further programming is required. Note: If some buttons do not operate your device, try one of the other codes for your brand.
Code Search If after trying "Direct Code Entry" your device does not respond, or if your brand is not listed, try doing a search of the code library for your code by following these steps.
  1. Manually turn on the device (TV, VCR, etc.) to be controlled.
  2. Press and hold the SETUP button until the red indicator stays on, then release the SETUP button.
  3. Press and release the desired Mode button (TV, VCR, etc.). The red indicator blinks once, then stays on.
  4. Press the CHANNEL UP button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator blinks, then stays lit.
  5. Press and release MUTE to install the code. The indicator light goes off.
Also try these four digit codes for Emerson Tv also. There are so many codes for Emerson Tv. 0004 0009 0044 0135 0049 0051 0189 0053 0147 0039 0130 0227 0233 0250 0252 0254 0257 0265 0266 0310 0325 0456 0040 0041 0042 0021 0023 0024 0179 0045 0025 0027 0030 0032 0034 0035 0037

Emerson EWC19T3... • Answered on Jan 03, 2012


if all you want to do is disable the vcr portion turn the set on , install a blank vhs tape it has to be blank or the vcr will try to read it .and the tv and dvd should work fine. this is a timing problem in the vcr deck its not hard to fix but it is a pain.

Emerson EWC19T3... • Answered on Sep 26, 2011


Hello
If the fault is only with tape play, and not with on air programmes, it is surely either with the tape or with the mechanism. Look at the tape filim for any curl at its bottom edge. If there is curling, rolling will occur becuse, contol signals are recorded at the botton edge of the tape. If top edge hage curling, sound will be effected. If there is no such mistake with tape, the pintch rollar of the VCR mechanism has worn out, and should be replaced. OK.

Emerson EWC19T3... • Answered on Jun 30, 2011

Not finding what you are looking for?
Emerson EWC19T3 19 in. TV/VCR/DVD Combo Logo

Popular Tags

154 questions posted

Ask a Question

Usually answered in minutes!

Top Emerson Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76582 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Cindy Wells

Level 3 Expert

6255 Answers

Are you an Emerson Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Emerson Televison & Video

  • Emerson Televison & Video

Most Popular Question

need code tv

  • Televison & Video
Loading...