Haier HTF20R21 20" TV - Answered Questions & Fixed issues


I have two haier LED LCD televisions with all the screens broken. they are 39'' and 32''. I would like to ask where I can get the screens to buy in order to fix them. Thank you.

Haier HTF20R21... | Answered on Feb 13, 2014 | 251 views


Contact Haier for customer service---they will step you thru the process--note that this information usually in their sets is also in the owner manual--if lost that Google the model number with "manual".

Haier HTF20R21... | Answered on Apr 09, 2012 | 186 views


I called tech support and they said to hold down the display button (the one that normally pops up the channel that you're on). I tried it and it worked even though none of the buttons got a response. It's definitely worth giving it a try!

Haier HTF20R21... | Answered on Jul 16, 2013 | 535 views


There is a way to program the comcast universal remote to the TV. If you still have the programming instructions, use the automatic search/ program function instead of manualy entering the product code. This usually works better since some TV manufacturers sell the same TV under other product names. Good luck. Please leave positive feedback if my answer is useful. Good luck

Haier HTF20R21... | Answered on Jul 22, 2010 | 244 views


It sounds as if you have accidentally turned on your secondary audio settings.
Here is how to fix it....
On your original TV remote next to the "0" key there is a button marked "sound". Press this button until the TV says stereo.

This should fix your problem.
Good Luck and please rate this solution...


Haier HTF20R21... | Answered on Mar 26, 2010 | 740 views


there is an auto search method....some remotes you can hold the tv button down and then the select button simultanteously for a few seconds to make the light turn red and then proceed with codes, when you get the right code you press the select button again, the light blinks and you are done..... well with out a code its the luck of the draw..... the auto search method is similar to programming the code in....hold the tv button and the select button for a couple seconds until the tv button lights up, but instead of a code.....press the channel up button(that represents the first autosearch code), continue until the tv turns itself off and then press the select button to lock it into the remote...........if you go past the trigger point you can channel down to backtrack.... otherwise drop it in the toilet until it wont work, call the cable company and have them send out a tech with anew remote. they cant charge you for their equipment not working correctly.
trust me, i am a supervisor at a major cable company.

Haier HTF20R21... | Answered on Jan 30, 2010 | 719 views


how can you up the sound when the button doesn't seem to do anything

Haier HTF20R21... | Answered on Jan 15, 2010 | 446 views


You cannot unlock the unit without an original remote.


Haier HTF20R21... | Answered on Nov 08, 2009 | 641 views


it depends upon the model, when you buy the remote there's a list of the unit that you may used into it. and also indicates there the code, just follow the instruction

Haier HTF20R21... | Answered on Jul 31, 2009 | 404 views


what kind of comcast remote do you have please describe, black and silver, dta, and especially important what color is the OK/select button grey or red. If the Ok/select button is red the codes are 11034, 10768, if the ok select button is grey there are no codes, however you can use the search option listed below

step 1 press the tv button located at the top of the remote
step 2 press and hold the setup button located on the upper right of the remote until the tv button blinks red 2 times.
step 3 enter code 991 the tv button will blink 2 times again
step 4 alternate pressing the grey Power button then the tv button located at the top of the remote ( the tv will turn off when it finds the correct code)
step 5 press the Setup button when the tv turns off and the tv button will blink 2 times confirming the code is locked in

FYI this process can take quite some time but there is no direct code listing for the non dvr remotes.

Good Luck

Haier HTF20R21... | Answered on Jun 20, 2009 | 938 views


In google search, type in the words "the word "factory on my tv", and it comes up with solution..it worked first time for me!.. Bill

Haier HTF20R21... | Answered on Mar 05, 2016 | 265 views


The GE Universal Remote will do the job. I have on and it works for my Haier TN201AUV TV. You can also find a replacement Haier remote on Remote Hound's web site.

On the other side of this I have a Dish Network remote that WILL NOT work. The Dish Network remote does not list any codes for Haier. Dish Network Tech Support could offer no help.

In an attempt to solve the problem myself, I looked on-line at GE's site listing all of the manufacturers' for their remotes and found the identical code that worked for my Haier TV also listed under APEX TV's. The Dish Remote lists (11) APEX TV codes. Ironically, NONE OF THEM WORK!

I'm stuck with using both remotes... and that's BULL$H!T

Haier HTF20R21... | Answered on Jan 25, 2009 | 738 views


I'm having the same problem. My screen is blue with a red lock in the bottom left hand corner. None of the buttons work except the on/off button on the television.

Haier HTF20R21... | Answered on Oct 09, 2008 | 494 views


You can find the remote control codes for different brands of devices from
http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

If none of the codes work then we have two other solutions:

1. Searching For Your Code

If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.
  1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER 9-9-1 (two blinks on the remote)
  4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
    Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
  5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

2. Learn the buttons from the original

Line up your original remote and the head-to-head before completing the following steps.
  1. PRESS and HOLD the SETUP button until the red LED flashes twice.
  2. PRESS 9 - 7 - 5, the red LED will flash twice.
  3. PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
  4. PRESS the button that will receive the learned function, the LED will flash rapidly.
  5. PRESS the button on the original remote to be learned.

Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned

More help for programming your remote can be found here:
http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device

Hope that helps! Should you have any further questions, please feel free to post them here.

P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.
If it hasn’t, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.

Thank you for using FIXYA!

Cheers!
IrishDruid

Haier HTF20R21... | Answered on Jul 13, 2010 | 14,357 views


Sounds like the unversal remote isnt programmed for your particular TV. See if the instruction manual gives the details for how to do that. If not, call them to see if they can walk you through it. If that doesnt work, go buy a big screen TV.

Haier HTF20R21... | Answered on Apr 11, 2008 | 91 views


I had the exact problem...tried a number of things that did not work. My dog "ate" my original remote. After reading your solution I took the universal remote that was programmed to work with the tv and tried holding down each button for a few seconds hoping that one would work like the display button on the original remote. It worked. I have a GE universal remote and the menu/info button worked for me. Again, you need to hold it in for a couple of seconds. Thanks for the help and I hope my added solution helps other people. Claudia in Minnesota

Haier HTF20R21... | Answered on Aug 31, 2008 | 640 views


Here is a question that we see often.

Question:
I've replaced everything in my television because it previously had a black screen with no lighting. Now it doesn't turn on at all and all I have is audio. What could be the cause ?
So your television stops working properly and you think it must be easy to fix, because you can buy boards on eBay, and you can watch YouTube videos. So you make a decision, you buy a board and you fit it, but the television still doesn't work! This is a classic case of the 'let's try replacing this' method of television repair and illustrates why it is a bad idea. It doesn't work for a number of reasons. To correctly diagnose issues, you need to know every board, what is does and every component on the board. You need to know which part has failed, replace the component, or replace the board. The parts you purchased off eBay were probably out of scrapped sets and not tested. The part your put in was dead when you put it in, so you just moved on to another guess at what might be the cause and replace a board that is fine. And so it goes on, you change all the boards and it still doesn't work. Did you notice the large print that says 'No Refunds, NO Returns'. This is to stop you sending your old one back and saying it didn't work, but the unscrupulous use it as an excuse to get money for selling items that may not work! The course to be a television engineer is 2 years full time education, take it to someone that knows how to diagnose and fix. It is by far the cheapest option. The part that failed might be a 20 cents fuse diode hard soldered to a board. They will charge you $2 parts and an hours labour.

Haier Televison... | Answered on Jan 28, 2020 | 26 views

Not finding what you are looking for?
Haier HTF20R21 20" TV Logo

36 questions posted

Ask a Question

Usually answered in minutes!

Top Haier Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76249 Answers

Eric Rotmil
Eric Rotmil

Level 3 Expert

587 Answers

CoppellTVRepair.com

Level 3 Expert

778 Answers

Are you a Haier Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...