20 Most Recent Philips DVD728 DVD Player - Page 2 Questions & Answers

This is most likely a problem with the power supply unit. Replacing the power supply should fix your issue.

A cautionary tale about television repair, but the obvious thing would be the power board as long at you found power at the end of the lead. https://www.fixya.com/support/r29790007-repairing_own_television ..

This issue could be caused by a faulty power supply or a malfunctioning component in the TV's circuitry. It is recommended to contact a qualified technician to diagnose and repair the problem.

4 digits Universal Remote codes for PHILIPS DVD Player

• 0885
• 2033
• 0503
• 2318
• 2404
• 2051
• 2109
• 2091
• 2033
• 1911
• 1914
• 0646
• 2302
• 2318
• 3 digits Universal Remote Codes for PHILIPS DVD Player
  • 755
  • 400
  • 370
  • 891
  • 408
  • 437
  • 370
  • 387
  • 362
  • 398
  • 423

The belts are weak and are skipping and also tired. Your VCR needs the belts to be replaced.Only some VCR types this problem does occur with.

You are missing the fact that you aren't a qualified television engineer and those boards weren't tested as working. :>D Have a read. https://www.fixya.com/support/r29790007-repairing_own_television ..

Here are the 3 ways to get a radio code. https://www.fixya.com/support/r29874205-need_vehicle_radio_code ..

It's very simple just remove the TV wire connected to your DVD drive then an option will pump up, asking you whether you want to use it, then select yes that's ok, it's done

yes it can copy and paste https://www.manualslib.com/manual/518388/Philips-Magnavox-Tp2780.html?page=4#manual .

It could be a lot of things causing the issue, without electronic knowledge it's going to be hard to diagnose, also a 10 plus year old set isn't worth fixing, parts will run more than the set is worth, time for a new set.

The inbuilt speakers are either broken or not working on your TV or the audio amplifiers are missing the supply voltage or the IC audio is not working anymore with your TV or there is an issue with the TV's capacitors.

Click the link and it will find a service centre near you. https://www.google.com/search?q=Philips+crt+tv+25HT2212+service+centre+near+me ..

This is the three ways to get a code. https://www.fixya.com/support/r29874205-need_vehicle_radio_code ..

5445 2422 531 02475 Obsolete!

Buy a cheap Universal Remote and then you can select the screen format mode

English only on Fixya. Philips TV remote codes. If you have recently bought a universal remote control and you need the remote codes to operate your Philips TV, we have codes below for your TV that should be working. If the first does not work keep trying the numbers down the list. Philips HDTV CODES 1129 1236 1237 1239 1261 1334 1351 1390 1411 Philips TV Codes 1004 1007 1011 1017 1018 1047 1053 1056 1057 1059

If it is the falling edge type of dimmer and the lamps you wish to use are dimmable, yes. Otherwise no.

If the television still won't turn on, turn your TV off at the wall and unplug it from the plug socket. Wait 30 seconds, and then plug it back in and switch it on. This is called a 'soft reset' and should recalibrate the TV

The power supply has been damaged as the power came back on. It requires a power supply repair.

I'd try a different tcon board, if your set doesn't have one replace the main board, if that doesnt fix it chances are really good you have panel issues, and the set isn't repairable