20 Most Recent Philips DVP320 DVD Player - Page 7 Questions & Answers

check primary section

check power supply

not possible

That probably means you need a new remote. Or new batteries. The blinking light means it's trying to turn on but failed to do so because it's dead or old.

Use code search on the URC to find something that works. If a search through all codes stored in the URC fails, try a different one.

This is a rather obscure manufacturer, and Philips has no assigned codes for it. However, there is an automatic mode for programming that universal remote. It is possible that some other manufacturer codes will work with your equipment. Try using the auto codes search function and you may get lucky.

NON COMPATIBLE TO YOUR TV SET

Failing power supply

Failing power supply

Use code search on your Philips URC to find something that works. If a search through all codes stored in the URC fails, try a different URC.

Could be a failing power supply

Failing power supply

Deselect hospitality mode to restore normal operation.

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. http://electronicshelponline.blogspot.com/ To some model sets; especially LED back-lighted types; the back-light inverter circuit will be part of the main power supply board [SMPS]. In such cases, the power supply board might need replacement. To some models sets, the back-light inverter and SMPS section circuit will be integrated at its main board itself. If so; the main board should be replaced. To some models of sets, all these section circuit will be integrated at its main board. If this is the case, you have to replace the main board. Search the site by type in the "brand name" to your device; (Exclude the model number), in the "Search box at the top right of the display window of the Homepage" to get gathered related posts.

A little more info may be needed. Does your TV say this as soon as you plug in your firestick or does it say this when you are trying to play a video? If the first hold down rewind "<<" while holding top circle of remote (outer ring) for 15 seconds. It is likely that your TV resolution is out of spec for the Firestick (4k?) and you will need to enable "legacy" (older) resolution mode on the Firestick. If this does not work, there are you You Tube videos on enabling this mode for your Firestick. If the second, then you are trying to play a video with an unsupported video Codec, in which case you would need to find a supported video.

Hi and welcome to the site,

Initially, postback with the model number.

BLOCKED as it implies indicates that the tray could not slide out; a common problem with some Philips models. Fix is to replace the DVD deck mechanism. Workaround is to always leave a disc inside.

Offhand, on most Philips models, there would be a manual eject slot at the bottom of the unit as shown in the representative image below.



Good luck and thank you for asking.

What is the problem/s you faces with this device? Provide more details; please. If you wish to get some details; check the site linked here. Pull up older posts. Surf the site with patience. http://electronicshelponline.blogspot.com/ Faults & possible causes to LCD screen are given with illustrations. You can get an idea about the fault to an extent. View the site by desktop or web view on mobile devices to see the "search box". Type in the brand name of your set in search box; to get gathered the related posts.

Back - light problem. Check and replace damaged component/s at its back-light inverter board, or replace this board as card basis. If you wish to get some details; check the site linked here. Surf the site with patience. Pull up older posts. It will be best to replace the inverter board as card basis. https://electronicshelponline.blogspot.com/

They are only downloadable via your TV set.

It need to be service because the problem is from the display panel