Philips 27PS55S 27" TV - Answered Questions & Fixed issues

If you're using a universal remote control with this TV, you have to setup it with setup codes to Sanyo TV, with this remote control. If you wish to get more details about setup codes and setup procedure, check these sites. http://electrohelponline.blogspot.com/ http://remotesearch.blogspot.com/ Selecting the view option, either to Mosaic / Timeslide, can be selected by the dropdown list, at the top left of the display window, will make surf easy.

If you don't know what PAL and NTSC signals are I would do some reading. It will explain what is happening. You can't use a ntsc device and set it to PAL. It doesn't work like that.

did you check in the set up might set to off, if the settings is ok check the speaker if worn out. now if the speaker is still good at this time you will need to have trouble shooting in the amplifier circuit at the main board weather the amplifier is bad.

if can not get with adjustment it could be a problem in the board, tried with re soldering cold soldered component joints at the video section.

This is pretty common. Usually it's because of bad solder connections at a part called the vertical output integrated circuit. Resoldering the bad connections is often all it takes to fix the trouble. While it's a simple repair, unless you have experience doing electronic soldering you should have this done by a professional. It's possible to more damage. Take the set to a shop for an estimate (won't cost as much as a new TV).

its obviously a feedback problem did u open the back of the tv and check the wires or the speakers?

U still have the tv original remote wright?Yes?Used the tv remote press the Menu button.Pick and go into the tv Sound Setting adjustment have all sound functions setting in there.

there is a problem in your tv amplifier section.

Well I don't need help any more with this item and by the way THE PANEL FOR THIS LCD TV GOES FOR $200 to $250 I found them all over the internet the part # is LC320 WXN SA-B! SO in short IT IS cheaper to fix than replace!!!!!!

No.All CRT tv don't have the digital tuner inside.So not a digital tv.

On the original TV remote press the button to the left of the 0 is a button marked "CC" just press this button to cycle through the 4 different closed caption options.

Good luck...

I have one also, I'm looking for a manual out of boredom i guess, but, everywhere i look, i see all of my tv's probs. As far as the coax input, unless you have a solder kit, not much you can do other than get an adapter, use the a/v, or a vcr. the tv going off after a few mins, I solve by hitting the guide button on my dish receiver or what ever you have to stimulate the tube.... I know that doesn't sound right, but you know what I mean. It sort of warms it up. That also works for the sound. It really does work for me, its just basically, getting it to "wake up"

bought a new universal remote control of phillips

SAMS tech.publ.#4538.

i found a universal remote that is of the same brand as the television. I tried every code until I found one that worked all of the functions on the menu

The minute I searched on your model number on philips.com, the answer appeared:

Here is the answer

Sorry it the picture tube it's going out. I'm surprise your color didn't fade first.

Check out page 14 of the manual.

If you don't have the manual click here to download:

https://www.p4c.philips.com/files/2/27ps55s/27ps55s_dfu_aen.pdf

I'm not sure about 10 seconds but its been unplugged and plugged back in and the darn thing still wont work.
I will try it
Thank you!

does your tv have scart, if so then your in luck, you can connect a set top box up to your tv via scart, youl have to watch it all through av