20 Most Recent E-Machines W1800 PC Desktop - Page 9 Questions & Answers

1. Press the Start button. 2. Type msconfig in Start menu or click 'run' and type msconfig. 3. Open the program. (Click msconfig icon if it doesn't open automatically) 4. Also, open the command box. Click Start > run > and type cmd.exe and open. (If the above method does not work, using "msconfig", your "System Configuration Utility" program should open on your screen. 5. Click on the "General" tab on the utility program. Select the "Normal Startup" option. Click "Apply" and "Ok" to confirm the change back to normal mode. 6. Follow the on-screen prompts to restart the computer. Your computer should reboot normally. 7. IF this doesn't work: Click on the "Boot" tab in " msconfig" > the "Safe boot" option should be unchecked. IF that doesn't work, go to "msconfig" again and click the Startup tab. Disable all startup programs or, if you know which one is causing the problem, just a single program. Hope this helps! Godspeed

e-machines are made by pc world/ curry's try this link . eMachines T2865 Manuals Support and Troubleshooting Desktops

Hi, I think you can view this link. How to Delete Bookmarks thanks

It is turned on by pressing the Fn (Blue Function key) and F3 key together. It should show as "on" with a Bluetooth icon. Once you know that it is working on your computer and a pairing device, here is a link for setting things up. http://www.wikihow.com/Set-up-Bluetooth

You want to be sure that the computer is recognizing the iPod. Apart from iTunes, when you plug in the iPod to the USB port, it should show up in My Computer as a device. If it does not, try a different cable or different USB port on the computer. Until the iPod is "seen" in Windows, it will not be able to communicate with iTunes. Hope this helps

right go into the bios and look through the options until you find one that says either UEFI or Legacy, make sure they are legacy. If you don't have this option, find out your bios version and then update it try again in the bios and see if this works if not switch to UEFI and then try again

hi, if the windows is not activated you wont see and also you needed to install You-cam software.

the led/lcd monitor is having issues, call tech support to get that fixed/replaced

Click start control panel administration tools computer management device manager scroll through all of your devices If you see a yellow question or exclamation mark ? ! or a red X you will need to update the drivers for this device right click select update driver/reinstall driver if you can see your usb device but its not working scroll to Ports(Com&Ltd) right click to update driver If you computer came with a motherboard disk the drivers could be on it. Rather doing a driver hunt which can take hours http://download.cnet.com/SlimDrivers-Free/3000-18513_4-75279940.html Windows XP/Vista/7/8 it might take some time being a freeware driver solution Note: it will find all of your outdated drivers This will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point. Click no to both of these then continue updating each driver free then restart once all of the drivers have been updated. also at cnet http://download.cnet.com/2000-20_4.html on the home page you should see a search tab just type in what you are looking for IE Motherboard name sound drivers. Place a tick in either windows software or all software box. You might have to try a few times to get it right.

Click start control panel administration tools computer management device manager scroll through all of your devices If you see a yellow question or exclamation mark ? ! or a red X you will need to update the drivers for this device right click select update driver/reinstall driver if you can see your usb device but its not working scroll to Ports(Com&Ltd) right click to update driver If you computer came with a motherboard disk the drivers could be on it. Rather doing a driver hunt which can take hours http://download.cnet.com/SlimDrivers-Free/3000-18513_4-75279940.html Windows XP/Vista/7/8 it might take some time being a freeware driver solution Note: it will find all of your outdated drivers This will automatically search for and find the correct driver you will have to update every driver individually once you update you might be asked whether you want to restart or make a system restore point. Click no to both of these then continue updating each driver free then restart once all of the drivers have been updated. also at cnet http://download.cnet.com/2000-20_4.html on the home page you should see a search tab just type in what you are looking for IE: Motherboard name sound drivers. Place a tick in either windows software or all software box. You might have to try a few times to get it right.

reinstall your dirvers disks

Rundll32.exe errors typically occur in response to the inability of Windows to access an application, program or file as the result of a corrupted or missing DLL (Dynamic Link Library) file or in response to a rundll32.exe virus that has been designed to look like a normal Windows process. Here are the easiest ways to fix rundll32.exe errors. Click "Ctrl + Alt + Delete" on your computer's keyboard to open the Task Manager window. Click the "Processes" tab and search for a rundll32.exe program. If one is running and appears to be accessing a lot of your system's resources, click "End Process" as it is likely a malicious program and not a true Windows program. Run software to seek out, detain and remove viruses, malware, spyware and adware. Often these malicious programs corrupt DLL files or cause them to be deleted or moved and, as mentioned, some rundll32.exe programs may in fact be viruses on your system. Reboot your computer to update any changes you may have made recently to your files and programs. Many programs and applications require a reboot for successful installation. Uninstall a recently installed or changed program or application and then reinstall it using the default settings. An installed program may not have loaded properly, an installation via the Internet may have been interrupted enough to create errors or the program may have a bug. If you uninstalled a program and see a rundll32.exe error, reinstall the program and then uninstall once more. Retain the services of a Microsoft certified technician, if all else fails, to review and fix your system's Registry.

http://minecraft.gamepedia.com/Texture_pack#Installing_a_texture_pack

- Start PC in safe mode, normally Pressing F8 key when windows starts up.( Google it) - In Safe Mode create a new user, with administrator privileges and protect it with password. - Remove unwanted software's & programs. - Empty the Recycle Bin. - Download reliable program RegInOut to fix OS registry properly. - Restart your PC normally and log on to the new account created. Stay Happy :-)

Try restarting...when the eMachines splash screen appears (e)...press Alt+F10 at the same time...this is the method I learned about when my eMachines recovery management would not complete the restoration process...mine is a desktop pc...but give it a try and see what happens.