20 Most Recent E-Machines eMonster 600 PC Desktop Questions & Answers

yes and i have never lookd back best thing i ever done..and to find out the best one to suit you is take the old one to a pc shop and they should tell you whats best.

E-Machines... • Answered on Apr 13, 2015

Match up the slot with where it should connect in your case. There will be a blank metal tab in the back of the case that you need to remove before you can add the card. 23130306-zvth3nwnb2epwys31crmuljy-3-0.jpg Computer Parts Laptops Electronics and More Newegg com

E-Machines... • Answered on Jan 29, 2015

you can go to google and search it then download or go to install hardware and get it there

E-Machines... • Answered on Jul 08, 2011

Yes, you have the capability to do so. However, I seriously recommending updating the RAM to the maximum capacity.

RAM Technology : SDRAM Installed RAM: 64 MB Max Supported RAM: 256 MB

E-Machines... • Answered on Jan 24, 2011

Yes you can...

Installing Windows XP on a Emonster 600 is the same process as installing Windows XP on any Windows-compatible personal computer. The process is not difficult, and can be completed quickly.

#1 Insert the Windows disc and restart your computer. When prompted to press any key to boot from the CD, press a key. Windows will begin the set-up process.
#2 When a list of hard drive partitions appears, delete each of them by pressing "D" to delete and "L" to confirm deletion. When finished, you should only have one choice: "unpartitioned space."
#3 Press "Enter", then format using the NTFS file system. Do nothing while Windows begins to install.
#4 Wait for Windows to restart. When the process continues, enter the product key, the time and time zone, and your name when prompted to do so. Allow the installation to continue; it may take some time.
#5 when Windows restarts again, continue the process using the on-screen instructions. The process will vary depending on your hardware configuration.
#6 Connect to the Internet and activate Windows once you reach your desktop. If you can't, you can also activate Windows over the phone. Installation is complete.

E-Machines... • Answered on Oct 03, 2010

1) Try it on a different USB port. If that doesn't work

2) Try it on another PC, if it doesn't work on either, you've got a faulty drive.

If it works on another PC but not yours, there's something wrong with your PC.

Check PC control centre, ask it to look for new hardware and/or check you device manager, see if its got a yellow question mark over one or more device. Which would mean re-installing

E-Machines... • Answered on Apr 13, 2010

it depends on how many your memory **** are, but ussually one memory **** can support as much as 2 or 3 gig

E-Machines... • Answered on Mar 10, 2010

or just try starting your laptop with the home key located to the right of the power button. when started close down correctly with shut down from the start menu.

hopefully problemo vamooosh

E-Machines... • Answered on Jan 20, 2010

If you can log on to an administrator account you can remove the passwords on other accounts. If you dont know the passwords for any of the accounts you can try ophcrack, which uses rainbow tables to recover passwords from the sam files (where windows keeps passwords, encrypted of course) and let you know what they are. High success rate on XP, not so high on vista or 7. For extra added bonus, its a free open source program.


E-Machines... • Answered on Jan 13, 2010

what is the question?

E-Machines... • Answered on Jan 12, 2010

your missing the biosinfo.inf. try reinstalling the system but backup everything you need first.

E-Machines... • Answered on Jun 09, 2009

this unti has 3 expansion slot (pci) , i would go with a sound blaster audigy2 or better if you are not going to use the onboard sound..

E-Machines... • Answered on Apr 04, 2009

If you have problems re-installing windows with NTLDR (New Technology Loader), the boot.ini file that it uses is damaged. I have only managed to get this sorted with a Full copy of windows as the recovery cd you get with some pc's have only the ability to restore your pc back to it's original state, which means a complete re-format first, giving no option for the recovery console. Even when using a full windows copy, the recovery console repairs did not work because it became apparent the HDD was damaged. You should however be able to install windows again assuming you have your cd/dvd drive as the first boot device but you will be better re- formating the drive when prompted as re installing over the top of windows can still cause problems. If you know what your doing you can copy the 'NTLDR' from the i386 folder on the disc, in to system by using a boot disk to get into msdos.

E-Machines... • Answered on Nov 21, 2008

It means that the driver for your sound card is not yet installed. Right click on MyComputer icon then select properties. Click on Hardware then click on Device Manager. Under Sound and Audio Device, look for anything that has a yellow question mark. Right click on it then select Update driver or Install driver. Get the driver CD that came with your computer and install your sound card.

Hope it fix your problem.

E-Machines... • Answered on Oct 13, 2008

Here is a link to the drivers, you have to register at this page in order to download them.


If I could be of further assistance, let me know. If this helps or solves the issue, please rate it.
Thanks, Joe
I’m happy to assist further over the phone at https://www.6ya.com/expert/joe_8b8c2cd6ce148309

E-Machines... • Answered on Oct 12, 2008

Remove the ram and reinstall it.

E-Machines... • Answered on Jul 20, 2008

hi this

E-Machines... • Answered on Jan 03, 2008

i have an e monster 600, when it does this it is "now safe to turn of your computer" all u have to do is hold down the damn button


E-Machines... • Answered on Feb 26, 2007

Make sure you have'nt left a floppy disc in the drive when booting up. If you havent press F2 or DEL on startup and enter the bios. In advanced bios settings ensure that the HDD is set at first boot device, if not select by means of either + or - keys or up and down arrows on number pad. Press Esc when done and save settings and exit to re boot system.

E-Machines... • Answered on Jan 17, 2007

the base 64kb memory is used by the bios to check the basics then pass through to the CPU to start everything up. Depending on your mobo make, 3 beeps could mean a ram failure or or something more sinister, check the mobo site for beep codes. If you like you can try re setting the bios on mobo look for JBAT1 terminal and move jumper from pins 1-2 to pins 2-3 for a few seconds and then back to 1-2. Restart pc and set time and ensure you get the Hard Disk drive recognised in the standard bios settings by pressing f8 or similair to auto detect drives, save then exit.

E-Machines... • Answered on Jan 17, 2007

Not finding what you are looking for?
E-Machines eMonster 600 PC Desktop Logo

22 questions posted

Ask a Question

Usually answered in minutes!

Top E-Machines Computers & Internet Experts

Lee Hodgson
Lee Hodgson

Level 3 Expert

4810 Answers

Michael Thomas
Michael Thomas

Level 3 Expert

3056 Answers


Level 3 Expert

1997 Answers

Are you an E-Machines Computer and Internet Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

eMonster E-Machines

  • eMonster E-Machines

Most Popular Question

add nic card

  • Computers & Internet