Top 10 Philips Magnavox 9P6034C 60" Rear Projection Television Questions & Answers

Philips Magnavox 9P6034C 60" Rear Projection Television Logo

Question

  • 10,395 People Helped

Phillips Magnavox 60 inch Projection Tv

My Roomates and I just picked up this TV and were warned about some color issues. The problem is that the picture is somewhat foggy and has a reddish tint. We tried playing with the color options but only could make it worse. Is there anything we can do to make the screen normal? Thank you in response to this message.

Posted by on

Answer

  • Most Helpful of 7 Answers

I have a white glow around all the white letters and just all the white colors in general. What do I do ?

Posted on Sep 19, 2008

Question

  • 1,914 People Helped

Philips Magnavox Video Shrinks over and over

I have a Philips Magnavox model number 9P5511C102 chasis number PTV836. The other night the video started to bounce in and out. It will shrink and expand over and over for a while then it works fine. How to I fix this problem.

Posted by on

Answer

  • Most Helpful of 1 Answers

If you have the following symptoms check the site www.TvRepairKits.com . They have a repair kit for this problem. 


Screen shrinks and expands - may or may not correct itself after the TV warms up. After a few days, weeks, or months of having the shrinking/expanding problem you may loose all audio/video but the power light will remain lit!



Works on the following Philips Magnavox sets with chassis number



PTV835, PTV836, PTV840, PTV841, PTV842, PTV843, PTV844, PTV847, PTV853 


Or if your Model number is... 



50YP43C101,50YP43C102,50YP44C101,50YP44C102,50YP44C103,50YP44C104,55P9161001,55P9161002,55P9161003,55P9161004,55P9271001,55P9271002,55P9271003, 55P9271004, 55P9271005, 55YP43C101, 55YP43C102, 55YP43C103, 55YP43C104, 55YP44C101, 55YP44C102, 55YP44C103, 55YP44C104, 55YP45C, 60P9161001, 60P9161002, 60P9161003, 60P9161004, 60P9271001, 60P9271002, 60P9271003, 60P9271004, 60P9271005, 60YP43C101, 60YP43C102, 60YP43C103, 60YP43C104, 64P9161001, 64P9161002, 64P9161003, 64P9161004, 64P9161005, 64P9161006, 64P9271001, 64P9271002, 64P9271003, 64P9271004, 64P9271005, 64P9271006, 64P9271007, 9P5031C101, 9P5031C102, 9P5031C103, 9P5034C101, 9P5034C102, 9P5034C103, 9P5040C101, 9P5040C102, 9P5040C103, 9P5040C104, 9P5044C101, 9P5044C102, 9P5044C103, 9P5044C104, 9P5511C101, 9P5511C102, 9P5514C101, 9P5514C102, 9P5531C101, 9P5531C102, 9P5531C103, 9P5534C101, 9P5534C102, 9P5534C103, 9P5540C101, 9P5540C102, 9P5540C103, 9P5540C104, 9P5544C101, 9P5544C102, 9P5544C103, 9P5544C104, 9P6031C101, 9P6031C102, 9P6031C103, 9P60349101, 9P60349102, 9P60349103, 9P6034C101, 9P6034C102, 9P6034C103, 9P6040C101, 9P6040C102, 9P6040C103, 9P6040C104, 9P6044C101, 9P6044C102, 9P6044C103, 9P6044C104, 9P6440C101, 9P6440C102, 9P6440C103, 9P6440C104, 9P6440C105, 9P6444C101, 9P6444C102, 9P6444C103, 9P6444C104, 9P6444C105, PV5571C101, PV5571C102, PV5571C103, PV5571C104, PV6071C101, PV6071C102, PV6071C103, PV6071C103, PV6071C104


Posted on Dec 12, 2008

Question

  • 1,744 People Helped

Red "aura" in the middle of my 55" Phillips Magnavox

My 55" Phillips Magnavox TV (9P5511C1) has a red "aura" in the middle of the screen. The picture has also lost it's crispness and appears dull. When adjusting the convergence the cross it not totally white; there is red showing through on all four points of the cross. Should I purchase a CRT Coolant Replacement Kit, or is it more likely a convergence chip problem?

Posted by on

Answer

  • Most Helpful of 1 Answers

Your TV most likely has one or more possible problems.

Problem #1: Convergence Chip Failure ( common problem )

Here are some of the most common symptoms and example photos of a convergence problem

  • Screen looks 3D
  • Colors don't line up
  • One or more colors can't be adjusted when using the convergence menu.
  • Screen is bowed or warped.
701cb04.jpg
77ea520.jpg
f0900cb.jpg
Here is a quick test....

Using your original remote go-to the tv settings then goto the convergence section.

Try to adjust the red and then the blue convergence.



You should be able to move them up, down, left, and right.

If you can't move them in all directions your convergence chips are bad and should be replaced. This is a common problem.

2c07611.pngSolution #1

You need to replace the convergence chips and convergence resistors. Check the site www.TvRepairKits.com. They have put together a kits for most models. If you don't see a kit for your set send them a quick note and they will put one together for you. Their kits include a photo instruction guide, original OEM Sanyo STK chips, convergence resistors, pico fuses, etc.


Problem #2 CRT Fluid is Cloudy

Projection TV tubes have a liquid coolant that is used to keep them from overheating. After many years the coolant in the blue and green tubes will become cloudy and cause the screen to look dull, red/orange, etc. You may even see halos around images.

Picture of a set that needs the fluid changed.

578ba6c.jpg
TV set after fluid change

65af323.jpg

2c07611.pngSolution #2


What you will need to do is replace the coolant and clean the crt. You can get a repair kit from www.TvRepairKits.com that includes replacement coolant, photos. instructions, etc.

Posted on Feb 13, 2009

Question

  • 1,680 People Helped

60" Philips Magnavox Projection TV Red Screen

We just got a 60" Philips Magnavox Projection TV that is about 7 years old. The screen is for the most part all orange/red but you can still see the picture. Can anyone tell what is wrong with it? And possibly tell me what it should cost to get this fixed? Thanks. a lot of red in the screen????

Posted by on

Answer

  • Most Helpful of 2 Answers

You can also check to see if you have bad fluid problems, by looking down in your crt's with a flashlight when you unplug your set and see if you can notice any particles that should not be there. Look at all three and see if there is a difference. It should be clear, if not then you need to change fluid and clean.
It sounds as if one of the picture elements (there are probably 3 for R-red G-green B-blue) has gone bad and it is most likely the green one. Sad to say it will probably cost you more to have it fixed than it would to buy a new TV. Most places will not even look at a TV for less than $85 or so, then they will add parts and labor... if they can even find parts.

Posted on Dec 17, 2007

Question

  • 1,235 People Helped

my Magnavox 9P5511C102 color has faded any thing i

my Magnavox 9P5511C102 color has faded any thing i can do to fix this?

Posted by on

Answer

  • Most Helpful of 1 Answers

Projection TV sets are known to have two common problems. The first problem that is common to these sets is convergence failure. When this happens the TV will usually look 3D, Wavy/Distorted, etc. It may also shutdown and blink an error code.

The second common problem with Projection TV sets is dull video, halos around objects, white looking video, or red overpowers the screen. This is commonly caused by the fluid in the lens being clouded overs. To get fixed either call in a local TV repair company or goto sites such as Tv Repair Kits to get a repair kit with instructions. Here is there link.

http://www.tvrepairkits.com/xcart/home.php?partner=papa1dude

They have put together complete kits for most models that include the parts, step by step photo instructions, repair assistance, etc.

Posted on Jun 14, 2010

Question

  • 1,173 People Helped

no color adjustment

I have a 60 inch philips magnavox rear projection tv that I cannot adjust the color or the convergence from the front panel can I adjust it from inside. what do I need to do to correcty this.

Posted by on

Answer

  • Most Helpful of 3 Answers

*CONVERGENCE SERVICE MODE PROCEDURES*

*Note: This procedure is required for all of the following geometry and
convergence adjustments.*

*Using the remote transmitter, enter the following seven-button sequence to
activate the convergence mode.*

* 06 - 25 - 97 - Menu (M)*

*The "Opening Menu" will appear offering choices:*

* *

* *

*Channel 3*

*Use Channel up/down to*

*Select a Channel with Video*

* *

* Remote control key functions:*

* Use arrow up/down and left/right: Adjust Convergence*

* M: Advance "cross" location*

* Up, Down, Left, Right*

* 3: Exit Convergence*

* Status: Abort/Cancel Changes*

* M: Begin Convergence*

* *

* *

*Note: video information must be present to correctly adjust the
convergence. A signal source is required to lock the vertical and
horizontal sync. After entering the "convergence service mode" verify the
presence of a video source by confirming the presence of active audio (use
the volume up function on the remote). Use the channel up and down function
on the remote to select the desired tuning source.*

* *

* *

*Select item "M" from the first menu, the "Convergence Menu" will appear
featuring 5 possible selections.*

* *

* Channel 3*

* Convergence:*

* *

*1. green geometry*

*2. red To green Convergence*

*3. blue To green Convergence*

*4. green To red Convergence*

*5. green To blue Convergence*

* Status: Abort/Cancel Changes*

* *

* *

*CONVERGENCE TOUCH UP PROCEDURE*

* *

*1. Enter the "convergence service mode" as described above in the
"convergence service mode procedure".*

*2. Select the desired color requiring adjustment. Note: Do not
select Green Geometry (1). This procedure is described under "Major
Convergence/Geometry Alignment. If Green Geometry is altered during this
procedure a "Major Convergence/Geometry Alignment" maybe required. *

*3. Cover the Output Lens of the single color presently NOT being
adjusted. Example: If you select Green to Red Convergence (4) cover the Blue
Output Lens.*

*4. The highlighted adjustment Icon (Cross) should be illuminated on
the middle left side of the screen. Make the necessary Convergence
Adjustments using the following Remote Keys:*

* *

*· Use the Arrow Up ( ) to adjust the selected color up.*

* *

*· Use the Arrow Down Key ( ) to adjust the selected color down.*

* *

*· Use the Arrow Right Key (-) to adjust the selected color to the
right.*

* *

*· Use the Arrow Left Key (+) to adjust the selected color to the
left.*

* *

*5. Move to the next location to be converged. It is not required
that the full Convergence Sequence be followed while performing the
"Convergence Touch Up Alignment Procedure". The following alternate Remote
Keys allow for positioning of the Icon to the desired adjustment location:*

* *

*· Key 2 on the Remote Transmitter will position the Adjustment
Icon upward on the screen.*

* *

*· Key 8 on the Remote Transmitter will position the Adjustment
Icon downward on the screen. *

* *

*· Key 4 on the Remote Transmitter will move the Adjustment Icon
to the Left.*

* *

*· Key 6 on the Remote Transmitter will move the Adjustment Icon
to the Right.*

* *

*6. Return to the "Convergence Service Menu" by selecting Key number
3 on the remote transmitter or by sequencing the Icon to the last adjustment
point at the lower right corner of the screen and pushing the Menu (M) Key
on the Remote Transmitter..*

* *

*7. Repeat steps 1 through 6 for other required Convergence
Alignments.*

*8. To Save the Adjustment completed in the last procedure,
Exit/Save the Convergence Service Mode by selecting Key 1 on the Remote
Transmitter. This forces the corrections to be written to the EEPROM on the
Convergence Module.*

* *

* *

* *

*Note: To save the convergence corrections made above you must exit the
convergence menu by selecting Exit/Save Data (1)*

Posted on Jul 05, 2008

Question

  • 1,109 People Helped

Regarding service manual for philips magnavox

chassis part # is PTV835 for model # 9P6034C103 serial # 39657034 mfg date 5/2000. The flyback was replaced Sunday. when tv is turned on it turns on very quiet. Two things are happening now. First, all the colors are out of line .I believe these could be adjusted somewhere. Two, the picture came back. At first it went full size then picture started shrinking and then big again for as long as I had tv on. At least two minutes as if there was something stopping the picture from going back to normal size. Perhaps, an IC chip or a resistor about to short out, maybe. The sound was good. Could you advise us of what or where is the cause of these or would we be able to determine by looking at the service manual and or schematics. We appreciate your help and expertise.

Posted by on

Answer

  • Most Helpful of 2 Answers

You can also get a Factory Service manuals from www.magnavoxhelp.com. The manuals can be downloaded instantly. They are complete with over 2000 pages in all.  
Their manuals cover all projection TV models with Chasis # PTV835, PTV836, PTV840, PTV841, PTV842,PTV843, PTV844, PTV847,PTV853

Posted on Jun 24, 2008

Question

  • 1,073 People Helped

My Philips Magnavox 9P5511C102 color is faded and not clear

My Philips Magnavox 9P5511C102 color is faded and not clear.
The colors seem faded (off) tv is not clear, like is got static, and picture is shaky. I have tried to fix using the Main Menu already. Out of these I get a picture and sound. Please help and let me know how can I fix it.

I have lost my manuals too so where can I download them or get them.

Oh one more thing. I connected my older laptop and the screen is worse. The side turns inward, the screen is smaller like it needs to be adjusted and not clear at all. How can I fix this.

I appreciate all response to correct my tv even if I end up unable to connect a laptop.

Thank you.

Posted by on

Answer

  • Most Helpful of 1 Answers

update the firmware/software if possible. my 60" has a USB slot on the right side. also you can download the manual from phillips http://www.support.philips.com/support/html/index_us_en.html#../~scripts/xsltransform.asp?url=http://www.sms.philips.com/catalogue/list?sid=SMS||type=CONSUMER||locale=us_en||mode=cats||item=TV_GR&xsl=subcatalog.xsl
my phillips 60PP9200D/37

Posted on Apr 28, 2008

Question

  • 1,033 People Helped

Magnavox PTV910. The picture is good but color is bad

I have a Magnavox PTV910. The picture is good but has a very noticeable RED tint to entire picture. The TV's color adjust does not fix the problem. I've seen where you check the color tubes, but it sounds complicated, is this something I can do at home? If so, how?

Posted by on

Answer

  • Most Helpful of 2 Answers

the coolant in the blue and green crts has congealed which is causing the red tube to become dominate. The coolant can be changed at home. You can get the phillips coolant replacement kit at the following link which contains the coolant and the CD with instructions.
http://www.tvrepairworld.com/

Posted on Jul 16, 2009

Question

  • 990 People Helped

my maxim LCD tv power board number 05TA071B has burn how do l get

My Maxim LCD Tv is no longer bringing light to the tv when the back was opened it was discovered that one ic in the power board was not passing light and all efforts to get a new one at my country Nigeria failed and l will want any body to help me have a new power board.
On the power board was written:
26 33 LCD POWER BOARD NUMBER 05TA071B.
Please my email address is [email protected]

Posted by on

Answer

  • Most Helpful of 1 Answers

You can get the repair kit which will have the parts you need at this link, or they will rebuild your board for you.
http://www.ohmsupplies.co.uk/epages/62027733.sf/en_GB/?ObjectPath=/Shops/62027733/Products/KIT02

Posted on Jun 17, 2009

800 questions posted

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76237 Answers

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

matt martin
matt martin

Level 3 Expert

1257 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Magnavox 9P6034C 60" Rear Projection Television Philips

  • Magnavox 9P6034C 60" Rear Projection Television Philips

Most Popular Question

ptv835 phillips

  • Televison & Video
Loading...