Top 10 Philips Magnavox Learning Universal Remote Questions & Answers

Philips Magnavox Learning Universal Remote Logo

Question

  • 35,819 People Helped

in need of codes for philips universal remote CL034

I am in need of codes to program my remote for use with a Sony t.v.

Posted by on

Answer

  • Most Helpful of 12 Answers

The codes to Sony TV's Are:
0414
0902
0801
0708
0639
Good Luck
This is for model number 3L034

Posted on Jan 28, 2008

Question

  • 34,038 People Helped

Living Solutions Remote - Manual

Where can I get a manual for the Living solutions universal remote (oversize)?  I need to know how to program it.
Thanks,
Henry

Posted by on

Answer

  • Most Helpful of 6 Answers

press and hold Tv VCR or DVD wait until the red light turns on then press power. Now press channel up or down until the the device turns on if you press it again while the device is on you'll have to do it again. After that hit OK then test it by pressing the volume button

Posted on Jan 19, 2009

Question

  • 19,230 People Helped

philips universal remote control cl034

I need a owners manual to reprogram-the batteries died and when I replaced them, It lost the program

Posted by on

Answer

  • Most Helpful of 2 Answers

http://rsk.imageg.net/graphics/uc/rsk/Support/ProductManuals/1500115_AD_EN.pdf
Try this website it really works. I just tried it today and I am sooo happy.

Posted on Feb 22, 2008

Question

  • 19,124 People Helped

living solutions giant remote control 3-in-1, A17G0510 (Item606426)

I have no manual or code numbers to enter for the living solutions 3-in-1 remote control. Need numbers for, and process on how to enter the numbers for a older 62"PhillipsMagnavox projection t.v., a Hitachi VCR, and a Apex DVD player. Please hurry. Thank you

Posted by on

Answer

  • Most Helpful of 5 Answers

I had trouble programing the living solutions giant remote - c17g0801.
But after many times serching I ran across a genius' resolution (maybe it was 2 genius') -
Jumbo Remote:
Make sure you have device turned on.

Hold the device button you want to program for 3 seconds & release.

Push & release the power button & the red light will remain lit.

Push the CHANNEL UP button over & over slowly until the device turns off.

When device turns off press OK button.

Posted on Nov 16, 2008

Question

  • 17,614 People Helped

code for universal remote rm-810

i need the codes for IDIGITAL RM-810 Universal Remote controller
My TV is Panasonic

Posted by on

Answer

  • Most Helpful of 11 Answers

There is an easy way to setup this remote controllerl(RC). It called "Automatic Code Searching" which means that you don't have to even find the code. The controller will searching it for you. Just do the following steppes.

1. Turn on the "Device" to be remotely controlled, e.g. TV, VCR.

2. Point the RC right to the "Device" .

3. Press a device button on the RC represent the "Device", e.g. TV, VCR, DVD etc. You can see the indicator lid flash once.

4. Press the SET and than the POWER button on the RC. hold both buttons for 2 seconds or more, you will see the red lid on. then release both buttons simutenously. after that the indicator lid will be flashing, means the searching started.

5. Keep pointing the RC to the "Device" until it is shut down by the RC, Press any button in 1.5 second to finish the setting.

You can try the RC now. It should work. My one is working.

Posted on Apr 09, 2010

Question

  • 15,864 People Helped

remote control code for magnavox dvd/vcr combo

have zenith remote and flat screen tv remote numbers where battery is located is - 6710v00121D 41/06/0006502

Posted by on

Answer

  • Most Helpful of 6 Answers

I need codes for my Universal Philips Magnavox remote for a Sanyodvd vcr combo ?

Posted on Aug 20, 2008

Question

  • 14,614 People Helped

Need the instructions and Code to Program universal remote control PHILIPS (Magnavox) and Magnavox TV.

Hello There!

I need the instructions and Code to Program an universal remote control PHILIPS (Magnavox) in a Magnavox TV.

Thank You for your help!
Maria Mercado

Posted by on

Answer

  • Most Helpful of 7 Answers

SETTING CODES
HOLD THE CODE SEARCH BUTTON DOWN UNTIL THE RED LIGHT STAYS LIT.

PRESS THE DEVICE BUTTON (ie TV)

CHANNEL UP BUTTON UNTIL THE CHANNEL CHANGES. (300 SHOULD BE MAXIMUM)

PRESS THE MUTE BUTTON TO SET THE CODE

Posted on Oct 19, 2009

Question

  • 14,383 People Helped

philips universal codes

i need to know the codes for my remote to turn my tv by it insted of using the vcr to change the chanel

Posted by on

Answer

  • Most Helpful of 9 Answers

If you dont have the codes for a philips universal remote you have to press code search and TV at the same time till the led light stays on. Then press the power button a few times untill the power turns your TV off, then press the OK button. After that the code should be in the remote.

Posted on Sep 03, 2009

Question

  • 13,307 People Helped

philips universal remote codes for symphonics tv

i lost my code sheet and i need the code for an symphonic television I LOST THE CODE LIST FOR MY REMOTE. IT IS A PHILIPS UNIVERSAL REMOTE THAT CONTROLS 6 DEVICES. IN THE BATTERY AREA IT HAS CL034, BUT I AM NOT SURE THAT THIS IS THE MODEL OR NOT? cAN YOU HELP ME? TERE I havbe looked at the website but can't find it

Posted by on

Answer

  • Most Helpful of 4 Answers

http://www.remotecodelist.com/remotes/magnavox/Philips-Magnavox_PM525S.pdf
This is the user's manual for a Phillips remote control. There is a list of codes in it. They should be rather universal. There's also instructions as to how to program it. I believe that there is a way to program it without using the codes.

Programming with Code Search

1. Manually turn on the device (TV, VCR, etc.) to be controlled.

2. Press and hold Code Search button until the red indicator stays on. Release the Code Search button.

3. Press and release the desired mode button (TV, VCR, etc.). The red indicator blink, then stays lit.

4. Press the Channel Up button repeatedly (up to 300 times) until the device could be controlled changes channel. The red indicator blinks, then stays lit. If you accidentally overshoot the code required, press the Channel Down button to backtrack through the library until the device changes channel. Pressing Channel Up changes direction to forward again. Press and release the Mute button to install the code.

Hope this helps :)

Posted on Jun 18, 2008

Question

  • 12,600 People Helped

clo34 philips remote codes

clo34 philips remote codes

Posted by on

Answer

  • Most Helpful of 4 Answers

You can find the remote control codes for different brands of devices from
http://www.hifi-remote.com/ofa/codes-tv.shtml#tv

If none of the codes work then we have two other solutions:

1. Searching For Your Code

If you have tried all of the set-up codes for your brand of equipment ,or your brand is not listed, and you are still not able to get the unit to respond, try the following procedure to search for your code.
If you don't find a code that works, the remote will flash four times when you reach the end of all the codes for this device type.

  1. PRESS the button for the device you want to program, (TV, VCR, CABLE, etc.), then RELEASE.
  2. PRESS and HOLD the SETUP button until the red LED flashes twice, then RELEASE.
  3. ENTER 9-9-1 (two blinks on the remote)
  4. ALTERNATE slowly between the POWER key and the DEVICE (TV, VCR, CABLE, etc.) button until your device turns off. (On VCR, LD, and CD players use PLAY instead of POWER)
    Make sure that the remote is pointed at your device during the search, You may have to press this sequences of buttons up to 100 times to search the entire library of codes.
  5. When your device turns OFF, PRESS the SETUP button and RELEASE it to lock in the code for your device.

2. Learn the buttons from the original

Line up your original remote and the head-to-head before completing the following steps.
  1. PRESS and HOLD the SETUP button until the red LED flashes twice.
  2. PRESS 9 - 7 - 5, the red LED will flash twice.
  3. PRESS the DEVICE key where you wish to learn the function. The next 3 steps must be completed within 10 seconds.
  4. PRESS the button that will receive the learned function, the LED will flash rapidly.
  5. PRESS the button on the original remote to be learned.

Now you can repeat steps 3 through 5 to learn other functions onto other keys or press and hold SETUP until the Cinema's red light flashes twice to lock in your new feature. (If the red light does not blink twice, stop and repeat steps through 6).
To test the new feature, press and release the device key in which the new feature was learned followed by the key on which the feature was learned

More help for programming your remote can be found here:
http://www.hifi-remote.com/manuals/ofa-l.shtml?URC-7800#device

Hope that helps! Should you have any further questions, please feel free to post them here.

P.S. - If you find that the solution/answer I provided led you to, or resulted in a fix, please close the ticket with a FixYa! rating. I would be very grateful for your show of appreciation.
If it hasn’t, please do not assign a rating just yet. Please post back as to what steps you took, results, etc, and I will try to assist you further as best I can. I am here at your service.

Thank you for using FIXYA!

Cheers!
IrishDruid

Posted on May 03, 2008

976 questions posted

Ask a Question

Usually answered in minutes!

Top Philips Televison & Video Experts

The Knight
The Knight

Level 3 Expert

76455 Answers

ThaMp3Doctor
ThaMp3Doctor

Level 3 Expert

8597 Answers

matt martin
matt martin

Level 3 Expert

1258 Answers

Are you a Philips Televison and Video Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

View Most Popular

Magnavox Learning Universal Remote Philips

  • Magnavox Learning Universal Remote Philips

Most Popular Question

srp2006 27 universal remote codes lg tv

  • Televison & Video
Loading...