Philips PH-DVD5 Remote Control - Answered Questions & Fixed issues

I need manual for cl015 also...

Try 00000 or 12345 or 99999. What kind of TV is it, and you could try main menu and parental controls screen trouble shooting. Try unplugging it.

It will be one of those on this page:

Coby Remotes
BTW, never put your phone number on any public document. You are inviting frauds and burglaries.

TV code is 115

Will not find a code for the DVD player though. Im not sure which model you have, but Dynex will send you to MCM Electronics for original replacement parts, that is their provider. Check out www.mcmelectronics.com or give them a call at 888-235-4692 to see if they have your remote. Remotes for the models DX-DVD2 and DX-UPDVD2 are both listed for $4.99 plus shipping.

have tv model CCA191AT31 and need a universal remote code

Hello,

I do not believe this is available on-line, but have some info that might help you use the remote.

To Search For A Code:

1. Manually turn on device to be controlled.
2. Press and hold the "Code Search" button until the red indicator light stays on, then release it.
3. Press and quickly release the desired ode button (TV, VCR, etc.). The red indicator light should blink once.
4. Press the "Channel Up" button repeatedly (up to 300 times) until the device to be controlled changes channel. The red indicator light should blink off with each button press. If you accidentally overshoot the required code, press the "Channel Down" button to backtrack through the library until the device changes channel. Pressing "Channel Up" changes direction again.
5. Press and release "Mute" button to install the code.

To Identify The Code That Was Found:

1. Press and hold the "Code Search" button until the red indicator stays on. Release the "Code Search" button.
2. Press and release the desired mode button (TV, VCR, etc.). The red indicator light blinks and then stays on.
3. Press and release the "Code Search" button. The red indicator light goes off.
4. To find the first digit for the code stored under the mode key pressed in "Step 2" press each numeric key from 1-9 in turn. When the red indicator light blinks off, the number you pressed is the first digit for the code you are searching for.
5. To find the second digit, repeat "Step 4," this time when the red indicator light blinks off, this is the second digit in your number.
6. Repeat again for the third digit in your code number.

I hope this helps out,

Chris

Is it the huge one where all the buttons are lit up in different colors, with a touch pad set-up?

Instructions on how to use the CODE SEARCH button:

In this example we will say we are setting up the TV button for our television set.

1. Manually turn the power to your television set ON.

2. Hold down the Code Search button on the remote for 2 or 3 seconds until the light on the remote stays on (aka stays solid).

3. Push the TV button on the remote.

4. Point the remote at your television and slowly press POWER until the television turns OFF.

5. Press the ENT button on the remote. (It is under the number 7 button.)

or for your actual codes, go to:
PHDVD5 CODES



http://www.replacementremotes.com/store/productdetailp.cfm?productid=6113

I found my operators manual.

http://www.urc.philips.com/

sharp tv

http://www.urc.philips.com/

www.remotecodelist.com ...........................T.

I NEED THE CODES FOR A SILVANNA TV

Susan41:
I'm confused if you have a Philips PH-DVD5 or not.

anyway if you do here is the manual and codes.

Manual
Manual

Codes:
Codes

Hope that helps!

If you can't find the code here there isn't one and it wont work

Manual
Manual

Codes:
Codes

Hope that helps!

kjsimmon:

Manual
Manual

Codes:
Codes

Hope that helps!

You did not specify model but you can try this. Repost if you have a specific model #.
Direct Philips Magnavox Universal Remote Code Entry PM335
1. Press and hold the Code Search button until the red
indicator stays on. Release the Code Search button.
2. Press and release the desired mode button (TV,
DVD, etc.).
The red indicator blinks, then stays lit.
3. Enter the 3 digit code from the code tables. Note:
after a valid code entry, the red indicator turns off.
For an invalid code, the red indicator flashes.
4. With your device on, press CHANNEL Up. If the
device responds, no further programming is
required. Note: If some buttons do not operate your
equipment, try one of the other codes for your
brand.

SONY .................. 202 708 801

Here is your manual:

http://rsk.imageg.net/graphics/uc/rsk/Support/ProductManuals/1502143_PM_EN.pdf

Philips PH-DVD5 manual:
http://rsk.imageg.net/graphics/uc/rsk/Support/ProductManuals/1502143_PM_EN.pdf