20 Most Recent
Questions & Answers
Remote control code for sanyo ds27880
Remotes.com has a replacement remote for your Sanyo if you can't find the codes for a universal remote. Here's the link for that: https://www.remotes.com/SearchResults.asp?Search=ds27880
New dp 19648 sanyo hdtv no signal detected
You gotta have a way to get signal to the tv . If you don't want a outside antenna use rabbit ears .After you hook them up hide them behind the tv then do a channel scan. If you don't pick up all the stations set them on top and scan again or get satillite or cable hd boxes.
How to play PS2 on Sanyo tv set
you can play your PS2 via the RF in (ANT IN ) at the back of your TV .
For this you will first have to connect a AUX to RF converter jack device to ANT IN jack of TV.
Then determine the OUTPUT CHANNEL of the PS2.
(Channels-1 to 12 is in VHF band
channels-21 to 69 -UHF band)
Put the PS2 "ON"
TUNE the TV set to the frequency of PS2.
Ds27820 tv video plug wont work
The set is indicated and seems to be a Sanyo DS27820 and the other expert has a valid idea---have it connected and turn it on and then go to the Menu and SELECT or HIGHLIGHT that input in order for it to see the input.I would also suggest trying it on more than one if the first does not work.
Cannot get the tv into 'video1' (or ' video2') mode
Unfortunately you need the original remote. There is still a good chance you can find a Sanyo universal remote. Check your local Circuit city or Super K mart or Walmart and look inthe electronics sections. I have often seen the Sanyo universal remote! And yes it will have the options you are looking for. Good Luck!
I have a sanyo ds27820 the tv does not come. it
Lets get to the fundamentals. Without any clicks at all, you probably don't have the 5V for the standby circuits. I don't recall the specifics about your model, but there should be a marking in the power supply area for a constant 5V line. Check that first. Without that the rest is useless. The 5V should be a simple 1/2wave rectifier circuit somewhere close to the AC entering the set.
Not finding what you are looking for?