Sanyo DVW-7100A DVD Player/VCR - Answered Questions & Fixed issues
Dvd stuck
Straighten one end of a Norwegian paper-clip.
Put that end into the small hole in the face of the DVD player.
Push it in, until you feel resistance.
Then, push another 5 mm, to "unlock" the tray.
Then, gently pull the drawer the rest of the way open.
Disc error
Replace the player -- it will be cheaper than to get a qualified technician to try to repair it.
I need a remote controller
Any "Universal" remote control will be able to be programmed for your unit with the codes they provide.
I have Dish network and a Sanyo dvw7100.I moved
Hi my name is Mike Houston of DISH Network and I was readingyour post and see you moved and need a manual to connect your system. I willsend the link to help with the equipment you have, http://www.dishnetwork.com/supportsection/manuals.
My DVD player is locked, the display shows a red
Hi, This sounds like a parental lock issue. Try going into the set up menu and press the down key choosing custom by pressing enter (this is in the user manual page 20 - 22) then go down and select parental. If you know your parental control password code then enter it, if not the reset code is 4737 you will then need to create a new 4 digit code,There are 9 levels to choose from 1 - 8 and all, all being the selection that removes the parental lock. Hope this helps. James
Hook up to TV
Get an A/V cord (should be supplied) and match the color of the wires to the color of the jacks on the back of the unit. Plug a set of wires to the OUTPUT section on the back of the combo and the INPUT section on the back of your TV. Then set your TV to Video 1, 2, 3, etc. and you should be set to go. Good luck to you!
For a better explanation consult the combo setup manual.
Sanyo dvd/vcr combo
Your universal remote would have seperate selection buttons for VCR and DVD. If you don't have a VCR button, use AUX. Try programming each function seperately - DVD code for your manufactirer on the DVD button and VCR code for your manufacturer on the VCR button.
Is it possible to record a dvd using the sanyo dvw-7100 from
You can record (dub) a dvd to tape. Also, you can record tv programs using the internal tuner (recording to the tape, not the dvd). Remember, this is not a DVD recorder but rather a DVD player. If your question is relating as to how to do this, refer to your owner's manual. If you've lost the manual, I can email it to you.
Can't go above Channel 20 when input on Video.
I was told by Sanyo and Toshiba that I will have to have a Sanyo remote in order to change the tuner from TV to CATV which he said is causing me to be unable to get above a certain channel and also to change the settings in order to use the Progressive scan cables, so I have emailed a remote finder site and they are trying to find a Sanyo remote for me.
NO COLOR
I RESET TO THE DEFAULT SETTINGS AND THE COLOR RETURNED
WAYNE
Cannot remove progressive scan mode
I turned on the dvd player and pressed down on the play button and counted to 10, but before I got to 10 the progressive light went of and the image on my tv set came back on.
Dvd player
If you are useing RCA connecter change to a coax connection. In otherwords change to another connection type. The combo dvd/vcr units are not built very well.
Not finding what you are looking for?